The most widely used aluminum, 6061 is fabricated into everything from pipe fittings and containers to automotive and aerospace parts. It is strong and corrosion resistant, plus it's easy to machine and weld.

An anodized coating bonds to the aluminum surface to improve wear and corrosion resistance.

More corrosion resistant and easier to form than multipurpose 6061 aluminum, 6063 is primarily used for exterior railings, decorative trim, and door frames.

Choose between sheets and bars that are precision ground on all six sides or just on the top and bottom.

Highly corrosion resistant, 5083 is largely used around salt water for building ships and oil rigs. It maintains its strength in extreme cold, so it's also used to make cryogenic pressure vessels and tanks.

From cookware to chemical-processing equipment, 304 stainless steel is a good all-around choice for a wide range of applications.

Widely used for fabricating fittings and fasteners, 303 stainless steel machines quickly without sticking to cutting tools.

The addition of molybdenum gives 316 stainless steel excellent corrosion resistance. Use it in a variety of marine and chemical-processing applications.

Precision ground on the top and bottom to a tight tolerance.

With a higher chromium content than 15-5 PH stainless steel, this high-strength 17-4 PH offers better corrosion resistance. It is also known as 630 stainless steel.

Also known as mild steel, low-carbon steel is easy to machine, form, and weld. It's widely fabricated into parts that don’t require high strength.

Also known as mild steel, low-carbon steel is easy to machine, form, and weld. It's widely fabricated into parts that don’t require high strength.

In addition to good corrosion resistance, the nickel coating provides better wear resistance than the zinc-galvanized coating.

Easy to forge, grind, and heat treat, these 1084 high-carbon steel bars offer high strength and resist wear and abrasion.

Even in low temperatures, A516 carbon steel resists breaking upon impact. Also known as pressure-vessel-quality (PVQ) steel, it is mostly used for boilers, storage tanks, and pressure vessels.

Combining strength with weldability and formability, A572 alloy steel is an economical choice for structural components, such as channels, beams, and framing. It has a low carbon content, making it easy to weld with a variety of welding methods.

With the highest lead content of all the brass alloys, 360 offers the best machinability. Often called free-machining and free-cutting brass, it stands up to high-speed drilling, milling, and tapping operations with minimal wear on your tools. It’s commonly used for gears, pinions, and lock components.

Offering high electrical conductivity and formability, 110 copper is 99.9% pure. Also known as ETP copper, it's often used in electrical applications, such as for bus bars and wire connectors, as well as for flashing, gaskets, and rivets.

With 99.99% copper content, 101 copper has higher purity than 110 copper, resulting in superior electrical conductivity. It's commonly called OFE and OFHC copper. Use it in electrical applications, such as for coaxial cables and terminal lugs.

These sheets and bars are precision ground to a tight thickness tolerance.

These precision-ground sheets and bars are held to a tight thickness tolerance.

These bars are precision ground to a tight thickness tolerance.

The thickness on these bars is precision ground to a tight tolerance.

In addition to a low-friction surface that prevents sticking and binding, this tough material is impact and wear resistant to handle the scuffs, scrapes, and strikes that other plastics can’t.

Practically nonabsorbent, HDPE won't swell when exposed to moisture. It is denser and more rigid than LDPE, plus it's more chemical resistant.

Made of recycled HDPE plastic, these sheets are more sustainable and economical than standard marine-grade moisture-resistant HDPE sheets.

Widely used for vehicle interiors and equipment housings, this blended material maintains its physical properties after thermoforming. It is comparable to Kydex.

An economical alternative to Delrin® acetal resin, this acetal copolymer offers similar wear resistance.

This blended material quickly diverts damaging static charges.

The combination of high strength and water resistance, along with a variety of color choices, makes this opaque cast acrylic useful for outdoor signs and containers. It's also known as Lucite and Plexiglas® Acrylic.

Made with virgin Teflon® PTFE resins, these sheets and bars surpass most plastics when it comes to chemical resistance and performance in extreme temperatures.

Filled with carbon and graphite, this naturally slippery PTFE stands up to wear better than standard PTFE.

Cast acrylic is easier to machine than extruded acrylic. It's comparable to Lucite and Plexiglas® Acrylic.

A static-dissipative coating on this cast acrylic prevents electrostatic discharge from damaging sensitive electronic equipment.

Modified for increased impact strength over other types of acrylic, this acrylic is often used for skylights and outdoor signs.

With a clear coating that provides protection from abrasion, UV light, and harsh cleaners, this polycarbonate is often used to create transit shelters and equipment shields.

Because PVC resists acids and alkalies, it is often used in tanks and chemical-processing applications where visibility is essential.

Greater strength than standard High-Temperature Silicone translates into better shock-absorbing qualities and longer life.

This rubber has better shock absorbing qualities and will provide longer life than Standard Multipurpose Neoprene.

While other black rubber can leave a mark after use, these specially formulated neoprene sheets leave no evidence behind.

These sheets and strips have one layer of cotton/polyester fabric for every 1/16" of thickness, so they maintain their size and shape under heavy compression better than the standard nonreinforced multipurpose neoprene. Use them as gaskets.

Even after repetitive compression, these super-soft sheets and strips maintain their cushioning ability. Use them to dampen noise and isolate vibration.

Use in food-processing environments for cutting surfaces, liners, and other high-wear applications. These sheets and strips are FDA compliant for direct contact with food.

Sunlight, ozone, and water won’t affect these sheets and strips.

Made from FDA-listed materials for use with food and beverage, these EPDM sheets and strips can be used in steamy environments.

Viton® fluoroelastomer stands up to tough chemicals, such as nitric acid, ethylene glycol, and isopropyl alcohol.

With equal chemical resistance to Viton® fluoroelastomer, Aflas provides a stronger, steam-tolerant alternative.

These sheets and strips offer better shock-absorbing qualities and longer life than standard Oil-Resistant Buna-N.

The addition of vinyl make these sheets the strongest Food Industry Oil-Resistant rubber we offer. Use them for high-tension applications, such as belting. They’re made from FDA-listed materials for use with food and offer good resistance to animal and vegetable oils.

With the greatest tensile strength of all our oil-resistant rubber, these super-strong Buna-N sheets and strips can handle high-tension applications, such as belting.

A good all-around choice, Garolite G-10/FR4 is strong, machinable, and electrically insulating. It meets UL 94 V-0 for flame retardance.

Use Garolite G-10 in place of Garolite G-10/FR4 for applications that are sensitive to halogen, such as in nuclear plants. It's strong, machinable, and electrically insulating.

Often used for terminal boards, electrical housings, end plates, and structural components in high temperatures, these sheets are a flame-retardant version of Garolite G-11. All are stronger and resist heat better than Garolite G-10/FR4.

These Garolite CE sheets and bars are often fabricated into parts where high strength is not required.

Using nothing more than standard high-speed steel tooling, Garolite LE can be machined into intricate parts.

Offering excellent arc and track resistance, this GPO3 fiberglass is often used for electrical applications in humid environments.

SG-200 fiberglass withstands temperatures up to 410° F—higher than any of our other fiberglass raw materials. It’s also stronger than FRP fiberglass and easy to machine.

Silicone maintains its flexibility across a wide range of temperatures.

This premium silicone is the most resilient foam we offer. It is equivalent to Cohrlastic and is also known as Norseal and silicone sponge.

Even after extended compression, these sheets and strips will bounce back to shape.

Seal and damp vibration around high-temperature food-service equipment with these silicone foam sheets and strips.

In addition to having good resistance to water, sunlight, and oxidation, these neoprene foam sheets and strips resist swelling when they come into contact with oil.

Made of EPDM foam, these sheets and strips have the best resistance to water, sunlight, and oxidation of all the foam we offer.

Even after extended compression, these high-performance polyurethane foam sheets and strips bounce back to shape faster than any other foam we offer. Also known as Poron urethane, they also stand up to wear caused by rubbing and scraping.

Good for tough vacuum-sealing and low closure-force applications, these polyurethane foam sheets and strips have open/closed cells to keep water, air, and gases from being absorbed when they are compressed at least 25%. Even after extended compression, all bounce back to shape faster than other foams we offer.

Made of FDA-listed materials, these polyethylene foam sheets are often used as packaging for food products to absorb shock and damp vibration.

This foam meets UL fire extinguishing specifications. It's made from a blend of Buna-N, neoprene, and vinyl to offer offer good resistance to oil.

This synthetic felt is an economical alternative to wool felt.

Thinner than most rigid insulation for furnaces and other high-heat applications, these millboard sheets are also used for gasket fabrication.

Typically used in ovens and furnaces, these are the most efficient of our rigid high-temperature insulation sheets. Please note that they require special care when installing since the crumbly material is difficult to work with and will crack easily. Sheets lose strength over time and are intended to be installed behind another facing or insulation material.

Able to withstand temperatures as low as -290° F, these super-thin, lightweight sheets are made of fiber-reinforced silica aerogel that can flex into tight spaces other insulation can't. Use in process piping and power-generating applications.

Made from a blend of cork and rubber, this material is commonly used for low-pressure applications.

For use in high-pressure applications up to 3,000 psi.

In addition to water and oil, this pliable leather gasket material resists salts, grease, and detergents.

Also resistant to water and salts.