We will reply to your message within an hour.
The most widely used aluminum, 6061 is fabricated into everything from pipe fittings and containers to automotive and aerospace parts. It is strong and corrosion resistant, plus it's easy to machine and weld.
More corrosion resistant and easier to form than multipurpose 6061 aluminum, 6063 is primarily used for exterior railings, decorative trim, and door frames.
With excellent strength and wear resistance, S30V stainless steel is a preferred material for knives and cutlery.
Also known as mild steel, low-carbon steel is easy to machine, form, and weld. It's widely fabricated into parts that don’t require high strength.
With a thickness that's precision ground to a tight tolerance, these bars are sometimes called flat stock.
Also known as flat stock, the thickness on these sheets and bars is held to a tight tolerance.
These sheets and bars are precision ground to a tight thickness tolerance.
These precision-ground sheets and bars are held to a tight thickness tolerance.
These W1 bars have lower amounts of alloy elements than other tool steels for excellent machinability.
The thickness on these bars is precision ground to a tight tolerance.
This material has a minimum of 99.5% pure lead content. Applications for lead include radiation shields, sound barriers, and vibration dampers.
Delrin® acetal resin, also known as acetal homopolymer, is stronger and stiffer than acetal copolymer.
An economical alternative to Delrin® acetal resin, this acetal copolymer offers similar wear resistance.
Practically nonabsorbent, HDPE won't swell when exposed to moisture. It is denser and more rigid than LDPE, plus it's more chemical resistant.
In addition to a low-friction surface that prevents sticking and binding, this tough material is impact and wear resistant to handle the scuffs, scrapes, and strikes that other plastics can’t.
Also known as nylon 6/6, this general purpose material is often used for bearings, gears, valve seats, and other high-wear parts.
Because this polypropylene resists swelling when exposed to water, it’s often fabricated into containers and parts for laboratory equipment.
One of the softest and most flexible plastics we offer, LDPE is more formable than HDPE.
Often fabricated into signs, packaging, and light duty housings, polystyrene is easy to thermoform.
Use Noryl PPO for electrical insulating applications where moisture is a concern. It remains dimensionally stable over time, even when temperatures fluctuate.
Made with Teflon® PTFE resins, these sheets and bars surpass most plastics when it comes to chemical resistance and performance in extreme temperatures.
Known for its naturally slippery surface, PTFE surpasses most plastics when it comes to chemical resistance and performance in extreme temperatures.
Not only does PEEK provide superior wear resistance in repetitive processes, it is also resists wear caused by abrasion. PEEK can be used as a lightweight substitute for metal parts in chemical-processing applications.
Often used for circuit-breaker housings, manifolds, and semiconductor components, Ultem PEI offers excellent electrical-insulating properties.
Just as chemical resistant as PTFE, yet FEP offers greater impact strength. Use it to make valve components and gaskets.
Cast acrylic is easier to machine than extruded acrylic. It's comparable to Lucite and Plexiglas® Acrylic.
This extruded acrylic offers similar performance as cast acrylic at a lower cost.
Modified for increased impact strength over other types of acrylic, this acrylic is often used for skylights and outdoor signs.
At only half the weight of glass, polycarbonate maintains excellent impact resistance across a wide temperature range. It's comparable to Lexan, Hyzod, Tuffak, and Makrolon.
PETG can be formed into complex shapes without sacrificing durability.
Made of FDA-listed materials, these sheets and strips are for use with food.
One layer of fiberglass cloth is inserted between two layers of silicone rubber to give these sheets and strips the strength to stand up to high stress and flex. Use them as flange gaskets and anywhere heavy compression would squeeze nonreinforced silicone rubber out of place.
This polyurethane combines the shock absorbing qualities of rubber with the tear resistance of plastic. Use it for high-tension applications such as conveyor belts, as well as for high-wear applications such as cutting surfaces, bumpers, and liners.
Commonly used for tires, conveyor belts, and chutes, SBR (styrene butadiene rubber) is harder and offers better abrasion resistance than natural rubber.
Neoprene is also known as chloroprene. It offers good oil and abrasion resistance.
This rubber has better shock absorbing qualities and will provide longer life than Standard Multipurpose Neoprene.
Made from FDA-listed materials for use with food.
While other black rubber can leave a mark after use, these specially formulated neoprene sheets leave no evidence behind.
With one layer of nylon fabric for every 1/16” of thickness, these sheets have the strength to be used as flange gaskets, diaphragm packing, and anywhere heavy compression would squeeze nonreinforced neoprene out of place.
These sheets and strips have one layer of cotton/polyester fabric for every 1/16" of thickness, so they maintain their size and shape under heavy compression better than the standard nonreinforced multipurpose neoprene. Use them as gaskets.
Viton® fluoroelastomer stands up to tough chemicals, such as nitric acid, ethylene glycol, and isopropyl alcohol.
Temperatures as low as –70° F have no effect on these fluorosilicone sheets and strips.
Offering higher tensile strength than standard Chemical-Resistant Viton® Fluoroelastomer, these sheets and strips provide greater tear resistance and longer life.
Sunlight, ozone, and water won’t affect these sheets and strips.
With greater strength than standard Weather-Resistant EPDM, these sheets and strips provide better shock-absorbing qualities and longer life.
Made from FDA-listed materials for use with food and beverage, these EPDM sheets and strips can be used in steamy environments.
A cross between plastic and rubber, Santoprene offers good resistance to weather and chemicals while retaining its stretchability.
For every 1/16" of thickness, there is one layer of super-strong fiberglass cloth that stands up to high stress and flex. Use these sheets and strips as flange gaskets and anywhere heavy compression would squeeze nonreinforced EPDM out of place.
Buna-N rubber resists fuel oil, hydraulic oil, ethylene glycol, and grease.
These sheets and strips offer better shock-absorbing qualities and longer life than standard Oil-Resistant Buna-N.
The addition of vinyl make these sheets the strongest Food Industry Oil-Resistant rubber we offer. Use them for high-tension applications, such as belting. They’re made from FDA-listed materials for use with food and offer good resistance to animal and vegetable oils.
Because these sheets and strips are made from peroxide-cured Buna-N rubber, they have better heat resistance than standard Oil-Resistant Buna-N rubber sheets and strips.
With the greatest tensile strength of all our oil-resistant rubber, these super-strong Buna-N sheets and strips can handle high-tension applications, such as belting.
A good all-around choice, Garolite G-10/FR4 is strong, machinable, and electrically insulating. It meets UL 94 V-0 for flame retardance.
Use Garolite G-10 in place of Garolite G-10/FR4 for applications that are sensitive to halogen, such as in nuclear plants. It's strong, machinable, and electrically insulating.
Rated for temperatures down to -415° F, this Garolite G-10 CR performs better in cryogenic applications than other glass epoxies.
Offering excellent arc and track resistance, this GPO3 fiberglass is often used for electrical applications in humid environments.
Hard fiber is the easiest composite to machine, making it good for creating custom parts. Also known as vulcanized fiber.
Silicone maintains its flexibility across a wide range of temperatures.
Even after extended compression, these sheets and strips will bounce back to shape.
Prevent the spread of flames with these self-extinguishing silicone foam sheets and strips.
Even after extended compression, these high-performance polyurethane foam sheets and strips bounce back to shape faster than any other foam we offer. Also known as Poron urethane, they also stand up to wear caused by rubbing and scraping.
Often used for impact pads, gaskets, and enclosure seals, these polyurethane foam sheets and strips absorb shock better than other resilient foam.
In addition to having good resistance to water, sunlight, and oxidation, these neoprene foam sheets and strips resist swelling when they come into contact with oil.
Made of EPDM foam, these sheets and strips have the best resistance to water, sunlight, and oxidation of all the foam we offer.
Made from a blend of Buna-N, neoprene, and vinyl, these foam strips have good resistance to oil.
This material resists boric acid, citric acid, isopropyl alcohol, fuel, and oil.
Made from a blend of cork and rubber, this material is commonly used for low-pressure applications.
With a maximum pressure of 55 psi, this cork gasket material is commonly used in low-pressure applications.
Also resistant to inert gases and abrasion, this material is made from blended aramid fiber/SBR rubber.
Stronger and able to withstand higher pressures than other types of aramid/Buna-N.
Made from a blend of aramid fiber and Buna-N rubber.
Commonly used in low-pressure applications, cork is blended with Buna-N rubber for a flexible, oil-resistant gasket material.
Cushion fragile items without the bulk of bubble wrap.
Suspend these thin sheets to reflect sound and block noise from traveling to other parts of your facility.
Drill holes of any size and etch your own circuit board design into copper-clad boards.
With a higher softening temperature than standard lining wax sheets, use these with casting and laminate resins that require heat during curing.
Flexible enough to conform to angles and bends, lining wax is bendable even at room temperature. Use it as a liner in stamping prototypes and to produce castings of die patterns.