MIC6 is cast from a high-strength 7000-series aluminum, then stress relieved to maintain dimensional stability during high-speed machining.

Widely used for fabricating fittings and fasteners, 303 stainless steel machines quickly without sticking to cutting tools.

The addition of molybdenum gives 316 stainless steel excellent corrosion resistance. Use it in a variety of marine and chemical-processing applications.

Each piece is precision ground to offer tighter tolerances than standard 17-4 PH stainless steel.

Precision ground on the top and bottom to a tight tolerance.

With a thickness that's precision ground to a tight tolerance, these bars are sometimes called flat stock.

The lead additive acts as a lubricant, which allows 12L14 carbon steel to withstand very fast machining. It's used to fabricate a wide variety of machine parts.

Combining strength with weldability and formability, A572 alloy steel is an economical choice for structural components, such as channels, beams, and framing. It has a low carbon content, making it easy to weld with a variety of welding methods.

With the highest lead content of all the brass alloys, 360 offers the best machinability. Often called free-machining and free-cutting brass, it stands up to high-speed drilling, milling, and tapping operations with minimal wear on your tools. It’s commonly used for gears, pinions, and lock components.

The thickness, length, and width are oversized for finishing to your exact requirements.

The thickness, length, and width are oversized for finishing to your exact requirements.

These W1 bars have lower amounts of alloy elements than other tool steels for excellent machinability.

Delrin® acetal resin, also known as acetal homopolymer, is stronger and stiffer than acetal copolymer.

Made with virgin Teflon® PTFE resins, these sheets and bars surpass most plastics when it comes to chemical resistance and performance in extreme temperatures.

Offering higher strength and better heat resistance than Garolite G-10/FR4, Garolite G-11 is suitable for continuous use in elevated temperatures.

Stronger than Garolite CE with better electrical-insulating properties, Garolite XX is often fabricated into low-cost electrical components.

In addition to having good resistance to water, sunlight, and oxidation, these neoprene foam sheets and strips resist swelling when they come into contact with oil.

Because this natural rubber foam readily bounces back to shape after compression, it’s a good choice for repetitive sealing applications, such as on doors.

Also known as nonmetallic molded strips.

Also known as semimetallic woven strips, these strips have a brass wire woven into the material to increase strength and improve heat dissipation.

These mats have an abrasive scraping surface and absorb water.

Ceramic magnets resist demagnetization better than other magnets and are an economical choice. They resist temperatures up to 480° F.