Material Material |
---|
|
For Use In For Use In |
---|
|
|
Finish Finish |
---|
|
Screw Material Screw Material |
---|
|
Gender Gender |
---|
|
System of Measurement System of Measurement |
---|
|
Snap Diameter Snap Diameter |
---|
|
Capacity Capacity |
---|
|
Throat Depth Throat Depth |
---|
|
Washer Type Washer Type |
---|
![]() | Standard |
Use these snaps in drilled holes when you need to fasten a fabric snap to a solid surface. Pair them with a standard female snap half or a male/female dual-sided snap (sold separately) to create a complete snap. The tapping screw stud cuts its own threads in a pilot hole and the snap has a Phillips drive for easy installation.
18-8 stainless steel snaps have good corrosion resistance and are mildly magnetic.
Brass snaps are rust resistant, electrically conductive, and nonmagnetic.
Screw Size | Thread Lg. | Snap Dia. | Screw Material | For Use In | Drive Size | Pkg. Qty. | Pkg. | |
18-8 Stainless Steel | ||||||||
---|---|---|---|---|---|---|---|---|
No. 8 | 3/8" | 9/16" | 18-8 Stainless Steel | Aluminum, Brass, Composite Board, Copper, Fiberglass, Particleboard, Plywood, Steel, Titanium, Wood | No. 2 | 10 | 000000000 | 00000 |
No. 8 | 5/8" | 9/16" | 18-8 Stainless Steel | Aluminum, Brass, Composite Board, Copper, Fiberglass, Particleboard, Plywood, Steel, Titanium, Wood | No. 2 | 10 | 000000000 | 0000 |
Nickel-Plated Brass | ||||||||
No. 8 | 3/8" | 9/16" | 18-8 Stainless Steel | Aluminum, Brass, Composite Board, Copper, Fiberglass, Particleboard, Plywood, Steel, Titanium, Wood | No. 2 | 10 | 000000000 | 0000 |
No. 8 | 5/8" | 9/16" | 18-8 Stainless Steel | Aluminum, Brass, Composite Board, Copper, Fiberglass, Particleboard, Plywood, Steel, Titanium, Wood | No. 2 | 10 | 000000000 | 0000 |
No. 10 | 5/8" | 9/16" | 18-8 Stainless Steel | Aluminum, Brass, Composite Board, Copper, Fiberglass, Particleboard, Plywood, Steel, Titanium, Wood | No. 2 | 10 | 000000000 | 0000 |
Use these snaps in threaded holes when you need to fasten a fabric snap to a solid surface. Pair them with a standard female snap half or a male/female dual-sided snap (sold separately) to create a complete snap. The threaded stud installs in threaded holes. Snaps have a Phillips drive for easy installation.
18-8 stainless steel snaps have good corrosion resistance and are mildly magnetic.
Brass snaps are rust resistant, electrically conductive, and nonmagnetic.
Thread Size | Thread Lg. | Snap Dia. | Screw Material | For Use In | Drive Size | Pkg. Qty. | Pkg. | |
18-8 Stainless Steel | ||||||||
---|---|---|---|---|---|---|---|---|
8-32 | 1/2" | 9/16" | 18-8 Stainless Steel | Aluminum, Brass, Copper, Fiberglass, Steel, Titanium | No. 2 | 10 | 000000000 | 00000 |
Nickel-Plated Brass | ||||||||
10-32 | 3/8" | 9/16" | Brass | Aluminum, Brass, Copper, Fiberglass, Steel, Titanium | No. 2 | 10 | 000000000 | 0000 |
When you need to fasten a fabric snap to a solid surface, drive these snap halves into place and pair with a standard female snap half or a male/female dual-sided snap (sold separately) to create a compete snap. The drilling screw stud drills its own hole and the snap has a Phillips drive for easy installation.
Aluminum carabiners are more corrosion resistant than zinc-plated carabiners. The black finish of anodized aluminum snaps blends into dark backgrounds and offers excellent corrosion resistance.
Lock by screwing the latch into the body.
Aluminum and nickel-plated steel carabiners are more corrosion resistant than zinc-plated steel carabiners.
Capacity, lbs. | Thick. | Opening Wd. | Inside Lg. | Narrow-End Inside Wd. | Each | ||
Aluminum | |||||||
---|---|---|---|---|---|---|---|
1 | 400 | 5/16" | 11/16" | 2 3/4" | 1/2" | 0000000 | 000000 |
1 | 1,200 | 3/8" | 11/16" | 3 5/16" | 1/2" | 0000000 | 00000 |
1 | 1,600 | 7/16" | 15/16" | 4 1/16" | 11/16" | 0000000 | 00000 |
2 | 2,200 | 1/2" | 1 1/16" | 3 1/2" | 1 1/16" | 0000000 | 00000 |
2 | 6,700 | 1/2" | 1" | 3 5/8" | 1 7/16" | 0000000 | 00000 |
4 | 5,100 | 3/8" | 1" | 2 9/16" | 1 3/8" | 0000000 | 00000 |
4 | 5,600 | 1/2" | 15/16" | 3 7/16" | 15/16" | 0000000 | 00000 |
To open, lift and twist the latch 90°.
Aluminum carabiners are more corrosion-resistant than zinc-plated steel. The black finish of anodized aluminum blends in with dark backgrounds and protects the aluminum from rust.
Capacity, lbs. | Thick. | Opening Wd. | Inside Lg. | Narrow-End Inside Wd. | Color | Specifications Met | Each | ||
Aluminum | |||||||||
---|---|---|---|---|---|---|---|---|---|
1 | 1,600 | 7/16" | 13/16" | 4" | 11/16" | __ | __ | 0000000 | 000000 |
2 | 2,200 | 1/2" | 1 1/16" | 3 1/2" | 1 1/16" | __ | __ | 0000000 | 00000 |
Anodized Aluminum | |||||||||
5 | 5,700 | 1/4" | 13/16" | 3 3/4" | 1 3/8" | Black | CE Marked | 00000000 | 00000 |
5 | 5,700 | 1/4" | 13/16" | 3 3/4" | 1 3/8" | Gold | __ | 00000000 | 00000 |
6 | 5,700 | 1/4" | 13/16" | 3 3/4" | 1 3/8" | Black | CE Marked | 00000000 | 00000 |
6 | 5,700 | 1/4" | 13/16" | 3 3/4" | 1 3/8" | Gold | __ | 00000000 | 00000 |
7 | 6,100 | 3/8" | 1" | 3 1/8" | 1" | Gold | CE Marked | 0000000 | 00000 |
The spring-loaded latches on these hooks snap back into place, securing your load.
Aluminum hooks have colorful finishes to easily identify different loads, and won’t rust in damp or humid environments.
For technical drawings and 3-D models, click on a part number.
Squeeze the adjustable pliers-grip handle to install standard and dual-sided fabric snaps and fabric grommets. Standard snap halves can be installed with the included 4-piece die set. Dual-sided snap halves require a die (sold separately) for installation. Grommets require a die set (sold separately) for installation.
Throat | ||||||
---|---|---|---|---|---|---|
For Snap Dia. | Dp. | Wd. | Max. Opening | Material | Each | |
9/16" | 3 1/4" | 1 3/4" | 7/8" | Aluminum | 000000000 | 0000000 |
For Snap Dia. | Each | |
9/16" | 000000000 | 000000 |
For Grommet Trade Size | Hole Size | For Grommet Washer Type | Each | |
00 | 3/16" | Extended Neck, Standard | 000000000 | 000000 |
0 | 1/4" | Extended Neck, Standard | 000000000 | 00000 |
0 | 9/32" | Extended-Neck Tooth | 000000000 | 00000 |
1 | 9/32" | Extended Neck, Standard | 000000000 | 00000 |
1 | 13/32" | Extended-Neck Tooth | 000000000 | 00000 |
2 | 3/8" | Extended Neck, Standard | 000000000 | 00000 |
For Snap Dia. | Material | Each | |
9/16" | Rubber | 000000000 | 00000 |
For Snap Dia. | Each | |
9/16" | 000000000 | 0000000 |
Press these grommets into a hole you've already cut. They strengthen and prevent holes from fraying in tarps, covers, and curtains. They also provide a way to run rope and cable through your material. Use a cutting punch (sold separately) to create the hole, then set the grommet using either an installation punch or a press (both sold separately). Trade size refers to the hole size and the size of the installation tool needed. All of these grommets can be used outdoors.
Aluminum grommets are lightweight and have good corrosion resistance.
Hammer-driven cutting punches create holes for installing grommets when you strike them with a wooden or rawhide mallet. Hammer-driven installation punches set grommets in a hole when you strike them with a wooden or rawhide mallet. Manual presses set grommets in a hole when you squeeze the adjustable pliers-grip handle. Requires a die set (sold separately).
For technical drawings and 3-D models, click on a part number.
Trade Size | For Max. Material Thick. | ID (C) | Flange Dia. (D) | Dp. Under Flange (F) | For Use Outdoors | Pkg. Qty. | Pkg. | |
Aluminum | ||||||||
---|---|---|---|---|---|---|---|---|
00 | 0.063" | 3/16" | 0.425" | 0.135" | Yes | 50 | 000000 | 00000 |
0 | 0.101" | 1/4" | 0.545" | 0.175" | Yes | 50 | 0000000 | 0000 |
1 | 0.108" | 9/32" | 0.687" | 0.185" | Yes | 50 | 0000000 | 0000 |
2 | 0.14" | 3/8" | 0.815" | 0.215" | Yes | 50 | 0000000 | 0000 |
3 | 0.219" | 7/16" | 0.97" | 0.295" | Yes | 50 | 0000000 | 00000 |
4 | 0.298" | 1/2" | 1.05" | 0.374" | Yes | 50 | 0000000 | 00000 |
Throat | |||||
---|---|---|---|---|---|
Max. Opening | Dp. | Wd. | Material | Each | |
7/8" | 3 1/4" | 1 3/4" | Aluminum | 000000000 | 0000000 |