McMaster-Carr logo
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    192 Products

    Corner Guards

    Image of Product. Front orientation. Contains Annotated. Corner Guards. Style 2.

    Style 2

    AluminumAbout Aluminum
    Image of Product. Front orientation. Contains Annotated. Corner Guards. Style 2.

    Style 2

    Metal guards provide more impact protection than plastic guards. They are commonly used in warehouse and manufacturing areas to protect corners on walls and other surfaces from impact.
    Aluminum—Aluminum guards are lightweight and offer good corrosion resistance.
    Glue On—Glue-on guards require contact adhesive to adhere to surfaces. Their temperature range depends on the adhesive you use.
    4 ft. Long
    8 ft. Long
    Wd.
    Thk.
    For Use
    Outdoors
    Each
    Each
    Style 2
     
    Aluminum—Glue On
    1 1/8"1/16"No8933T42000000———0
    3"1/16"No———08933T52000000
    4"1/16"No8933T6200000———0
     

    Door Kick Plates

    Kick plates prolong the life of doors by shielding them from scratches, dings, and marks in high-traffic areas. They also keep moisture from damaging the base of doors in facilities that require frequent mopping and cleaning. Our kick plates are tested with salt spray to meet ANSI A156.6 requirements for strength, appearance, and durability. They stay looking like new, even when installed outdoors in humid or wet environments.
    Screw In
    Image of Product. Front orientation. Door Kick Plates. Screw In.
    Mount with the included self-drilling screws and skip drilling a hole. The screws match the finish of the plates and sit flush to create a clean, smooth look.
    Aluminum—At one-third the weight of stainless steel, these kick plates won’t weigh down swinging doors. Like 304 stainless steel, they won’t corrode when exposed to moisture, but they are more likely to scratch and dent.
    Width—Select a kick plate 2" narrower than your door to prevent obstructions when opening and closing it.
    Height—Kick plates 34" to 46" in height guard against damage from carts or dollies better than shorter plates.
    Ht.
    Thk.
    For Use
    Outdoors
    Mounting Fasteners
    Included
    Dull
    Aluminum
    24" Wide
    34"0.05"YesYes1401A510000000
     
    28" Wide
    6"0.05"YesYes1401A5200000
    8"0.05"YesYes1401A5300000
    10"0.05"YesYes1401A5400000
    12"0.05"YesYes1401A5500000
    36"0.05"YesYes1401A56000000
    42"0.05"YesYes1401A57000000
     
    30" Wide
    6"0.05"YesYes1401A5800000
    8"0.05"YesYes1401A5900000
    10"0.05"YesYes1401A6100000
    12"0.05"YesYes1401A6200000
     
    34" Wide
    6"0.05"YesYes1401A6300000
    8"0.05"YesYes1401A6400000
    10"0.05"YesYes1401A6500000
    12"0.05"YesYes1401A6600000
    16"0.05"YesYes1401A6700000
    34"0.05"YesYes1401A68000000
    36"0.05"YesYes1401A69000000
    46"0.05"YesYes1401A71000000
     
    36" Wide
    8"0.05"YesYes1401A7200000
    10"0.05"YesYes1401A7300000
    12"0.05"YesYes1401A7400000
     
    48" Wide
    8"0.05"YesYes1401A7500000
    12"0.05"YesYes1401A7600000
    16"0.05"YesYes1401A7700000
     

    Aluminum Wall Bases

    Image of Product. Front orientation. Contains Annotated. Wall Bases. Aluminum Wall Bases.
    This aluminum base provides more impact protection than a plastic base. In addition to protecting the bottom of a wall from damage, it creates a finished look where the wall meets the floor. Commonly used in warehouse and manufacturing areas, it's lightweight and offers good corrosion resistance. A contact adhesive is required to adhere it to a surface.
    Wd.
    Lg.,
    ft.
    Thk.
    For Use
    Outdoors
    Each
    Aluminum
     
    Glue On
    4 3/4"41/16"No8933T72000000
     
    Adhesives
    Each
    Adhesive for Wall Bases (29-fl. oz. Cartridge)7539A19000000

    Panel Connecting Trim

    Image of Product. Front orientation. Panel Connecting Trim. Style 1.
    Image of Product. Front orientation. Panel Connecting Trim. Style 2.
    Image of Product. Front orientation. Panel Connecting Trim. Style 3.
    Image of Product. Front orientation. Panel Connecting Trim. Style 4.

    Style 1

    Style 2

    Style 3

    Style 4

    Image of Attribute. Front orientation. Contains Annotated. Style 1.
    Image of Attribute. Front orientation. Contains Annotated. Style 2.

    Style 1

    Style 2

    Image of Attribute. Front orientation. Contains Annotated. Style 3.
    Image of Attribute. Front orientation. Contains Annotated. Style 4.

    Style 3

    Style 4

    Connect two panels while protecting the edges from damage. Push this trim onto an edge and its tight grip holds it in place. Since all of this trim is rigid and does not bend, it's designed for straight surfaces. Made of aluminum, it's lightweight and offers good corrosion resistance. It can be used outdoors.
    3 ft. Long
    6 ft. Long
    8 ft. Long
    Inside
    Wd. (A)
    Outside
    Ht. (B)
    Inside
    Ht. (D)
    Short Leg
    Outside Ht. (F)
    Thk.
    Flexibility
    For Use
    Outdoors
    Appearance
    Each
    Each
    Each
    Aluminum
     
    Style 1
    5/32"1 3/64"3/64"RigidYesDull8429A30000008429A40000008429A101000000
    17/64"1 3/64"3/64"RigidYesDull8429A1000008429A2000008429A10200000
     
    Style 2
    1/16"1"5/16"3/64"RigidYesDull8429A103000008429A104000008429A10500000
    7/64"1 1/4"5/8"3/64"RigidYesDull8429A106000008429A107000008429A10800000
    11/64"1 1/4"1/2"3/64"RigidYesDull8429A109000008429A11000008429A11100000
    1/4"1 3/8"1/2"3/64"RigidYesPolished8429A7000008429A8000008429A11200000
    19/64"1 1/4"1/2"3/64"RigidYesDull8429A113000008429A114000008429A11500000
    33/64"1 1/4"5/8"1/16"RigidYesDull8429A65000008429A72000008429A11600000
     
    Style 3
    11/64"7/64"11/16"3/64"RigidYesDull8429A117000008429A118000008429A11900000
    19/64"39/64"53/64"3/64"RigidYesDull8427A5000008427A6000008429A1200000
     
    Style 4
    9/32"1/2"39/64"3/64"RigidYesDull8429A121000008429A122000008429A12300000
     

    Fire Alarm-Activated Wall-Mount Door Holders

    Image of Product. Front orientation. Contains Annotated. Door Holders. Fire Alarm Activation, Wall Mount.
    For use with doors that already have a closer, these holders keep doors open with an electromagnet. When activated by a fire alarm, the magnet shuts off and releases the door. Wire these holders directly into your fire alarm system. All are reversible for right or left door-swing directions.
    Mount the wall plate in an electrical outlet box or use a surface mounting box (sold separately).
    Door Holders
    Surface Mounting Boxes
    for Door Holders
    Wall Plate
    Door Plate
    Manufacturer Series
    Projection
    Ht.
    Wd.
    Projection
    Ht.
    Wd.
    Material
    Voltage
    Mounting Hardware
    Included
    Certification
    Each
    Each
    Rixson-Firemark 994 Series1"4 5/8"2 3/4"2 3/4"2 17/32"1 11/16"Dull Aluminum-Coated Aluminum, Aluminum-Coated Plastic12V DC, 24V AC, 24V DC, 120V AC, 240V ACYesUL Listed
    1444A1200000001444A13000000
    Rixson-Firemark 996 Series2 1/2"4 5/8"2 3/4"1 5/8"2 17/32"1 11/16"Dull Aluminum-Coated Aluminum, Aluminum-Coated Plastic12V DC, 24V AC, 24V DC, 120V AC, 240V ACYesUL Listed
    1444A11000000———0
     

    Aluminum Edge Trim

    Image of Product. Front orientation. Edge Trim. Aluminum Edge Trim, Style 1.
    Image of Product. Front orientation. Edge Trim. Aluminum Edge Trim, Style 2.
    Image of Product. Front orientation. Edge Trim. Aluminum Edge Trim, Style 3.
    Image of Product. Front orientation. Edge Trim. Aluminum Edge Trim, Style 4.
    Image of Product. Front orientation. Edge Trim. Aluminum Edge Trim, Style 5.

    Style 1

    Style 2

    Style 3

    Style 4

    Style 5

    Image of Product. Front orientation. Edge Trim. Aluminum Edge Trim, Style 6.
    Image of Product. Front orientation. Edge Trim. Aluminum Edge Trim, Style 7.
    Image of Product. Front orientation. Edge Trim. Aluminum Edge Trim, Style 8.
    Image of Product. Front orientation. Edge Trim. Aluminum Edge Trim, Style 9.
    Image of Product. Front orientation. Edge Trim. Aluminum Edge Trim, Style 10.

    Style 6

    Style 7

    Style 8

    Style 9

    Style 10

    Extruded for a smooth, consistent finish, this durable yet lightweight trim protects and spruces up the edges of workstations, mirrors, and signs. It absorbs knocks and scrapes better than nonmetal trim, keeping edges like new over longer periods. For use indoors and out, the corrosion-resistant aluminum maintains its strength and attractive finish through frequent rinsing, humidity, and rain.
    Style 1
    Image of Product. Front orientation. Edge Trim. Aluminum Edge Trim, Style 1.
    Image of Attribute. Front orientation. Contains Annotated. Aluminum Edge Trim, Style 1.
    3 ft. Long
    6 ft. Long
    Inside
    Wd. (A)
    Outside
    Ht. (D)
    Thk.
    Flexibility
    For Use
    Outdoors
    Appearance
    Mount
    Type
    Each
    Each
    1/4"7/16"1/16"RigidYesDullPush On8123A420000008123A71000000
    17/64"15/16"1/16"RigidYesDullPush On8123A43000008123A7200000
    3/8"5/16"1/16"RigidYesDullPush On8123A44000008123A7300000
    1/2"9/16"1/16"RigidYesDullPush On8123A45000008123A7400000
    3/4"5/16"1/16"RigidYesDullPush On8123A46000008123A7500000
    3/4"3/4"1/8"RigidYesDullPush On8123A48000008123A7900000
    1"13/16"1/16"RigidYesDullPush On8123A47000008123A7700000
    Style 2
    Image of Product. Front orientation. Edge Trim. Aluminum Edge Trim, Style 2.
    Image of Attribute. Front orientation. Contains Annotated. Aluminum Edge Trim, Style 2.
    Mounting Hole
    3 ft. Long
    6 ft. Long
    Inside
    Wd. (A)
    Outside
    Ht. (D)
    Short Leg
    Outside Ht. (F)
    Thk.
    Flexibility
    For Use
    Outdoors
    Appearance
    Mount
    Type
    Style
    Dia.
    Ctr.-to-Ctr.
    Mounting Fasteners
    Included
    Each
    Each
    19/64"15/16"3/8"1/16"RigidYesDullScrew InStraight1/8"4"No8427A10000008427A2000000
    19/64"1 1/4"5/8"1/16"RigidYesDullScrew InStraight1/8"4"No8427A3000008427A400000
    Style 3
    Image of Product. Front orientation. Edge Trim. Aluminum Edge Trim, Style 3.
    Image of Attribute. Front orientation. Contains Annotated. Aluminum Edge Trim, Style 3.
    Mounting Hole
    3 ft. Long
    6 ft. Long
    Inside
    Wd. (A)
    Outside
    Ht. (D)
    Short Leg
    Outside Ht. (F)
    Thk.
    Flexibility
    For Use
    Outdoors
    Appearance
    Mount
    Type
    Style
    Dia.
    Ctr.-to-Ctr.
    Mounting Fasteners
    Included
    Each
    Each
    1/16"23/32"3/16"3/64"RigidYesDullScrew InNo8427A320000008427A61000000
    5/32"23/32"9/32"3/64"RigidYesPolishedScrew InStraight1/8"4"No8427A52000008427A6300000
    13/64"23/32"5/16"3/64"RigidYesPolishedScrew InStraight1/8"4"No8427A53000008427A6400000
    17/64"7/8"5/16"3/64"RigidYesPolishedScrew InStraight1/8"4"No8427A33000008427A6500000
    21/64"1"3/32"1/16"RigidYesPolishedScrew InNo8427A16000008427A1700000
    21/64"1 11/64"21/32"3/64"RigidYesPolishedScrew InStraight1/8"4"No8427A54000008427A6800000
    25/64"7/8"3/8"3/64"RigidYesDullScrew InNo8427A34000008427A6700000
    33/64"1 1/4"9/16"1/16"RigidYesDullScrew InNo8427A35000008427A7800000
    Style 4
    Image of Product. Front orientation. Edge Trim. Aluminum Edge Trim, Style 4.
    Image of Attribute. Front orientation. Contains Annotated. Aluminum Edge Trim, Style 4.
    Mounting Hole
    3 ft. Long
    6 ft. Long
    Inside
    Wd. (A)
    Outside
    Ht. (D)
    Short Leg
    Outside Ht. (F)
    Thk.
    Flexibility
    For Use
    Outdoors
    Appearance
    Mount
    Type
    Style
    Dia.
    Ctr.-to-Ctr.
    Mounting Fasteners
    Included
    Each
    Each
    11/64"15/16"3/16"1/8"RigidYesPolishedScrew InStraight3/16"6"No8427A120000008427A7000000
    11/64"1 11/64"3/16"9/64"RigidYesPolishedScrew InStraight3/16"6"No8427A13000008427A800000
    Style 5
    Image of Product. Front orientation. Edge Trim. Aluminum Edge Trim, Style 5.
    Image of Attribute. Front orientation. Contains Annotated. Aluminum Edge Trim, Style 5.
    Mounting Hole
    3 ft. Long
    6 ft. Long
    Wd.
    Thk.
    Flexibility
    For Use
    Outdoors
    Appearance
    Mount
    Type
    Style
    Dia.
    Ctr.-to-Ctr.
    Mounting Fasteners
    Included
    Each
    Each
    3/8"5/32"RigidYesDullScrew InCountersunk1/8"6"No8124A140000008124A15000000
    1/2"3/16"RigidYesDullScrew InCountersunk1/8"6"No8124A16000008124A1200000
    3/4"3/16"RigidYesDullScrew InCountersunk1/8"6"No8124A36000008124A4300000
    1"3/16"RigidYesDullScrew InCountersunk1/8"6"No8124A37000008124A4400000
    Style 6
    Image of Product. Front orientation. Edge Trim. Aluminum Edge Trim, Style 6.
    Image of Attribute. Front orientation. Contains Annotated. Aluminum Edge Trim, Style 6.
    Outside
    3 ft. Long
    6 ft. Long
    Inside Ht.
    (B)
    Wd.
    (C)
    Ht.
    (D)
    Thk.
    Flexibility
    For Use
    Outdoors
    Appearance
    Mount
    Type
    Mounting Fasteners
    Included
    Each
    Each
    13/32"1"1/2"3/32"RigidYesDullScrew InNo8122A530000008122A54000000
    7/16"1/2"1/2"1/16"RigidYesDullScrew InNo8122A51000008122A4500000
    7/16"1"1/2"1/16"RigidYesDullScrew InNo8122A46000008122A4700000
    5/8"3/4"3/4"1/8"RigidYesDullScrew InNo8122A73000008122A8200000
    41/64"11/16"11/16"3/64"RigidYesPolishedScrew InNo8122A81000008122A1300000
    21/32"1 3/4"3/4"3/32"RigidYesDullScrew InNo8122A74000008122A8300000
    11/16"3/4"3/4"1/16"RigidYesDullScrew InNo8122A55000008122A4800000
    7/8"1"1"1/8"RigidYesDullScrew InNo8122A75000008122A8500000
    15/16"1"1"1/16"RigidYesDullScrew InNo8122A58000008122A8400000
    1 1/32"1 3/4"1 1/8"3/32"RigidYesDullScrew InNo8122A76000008122A8600000
    1 3/8"1 1/2"1 1/2"1/8"RigidYesDullScrew InNo8122A77000008122A8700000
    1 7/8"2"2"1/8"RigidYesDullScrew InNo8122A79000008122A8800000
    Style 7
    Image of Product. Front orientation. Edge Trim. Aluminum Edge Trim, Style 7.
    Image of Attribute. Front orientation. Contains Annotated. Aluminum Edge Trim, Style 7.
    Outside
    Mounting Hole
    3 ft. Long
    6 ft. Long
    Inside
    Ht. (B)
    Wd.
    (C)
    Ht.
    (D)
    Thk.
    Flexibility
    For Use
    Outdoors
    Appearance
    Mount
    Type
    Style
    Dia.
    Ctr.-to-Ctr.
    Mounting Fasteners
    Included
    Each
    Each
    11/64"13/16"1/4"1/16"RigidYesDullScrew InCountersunk1/8"6"No1104A640000001104A93000000
    3/16"9/16"1/4"1/16"RigidYesDullScrew InCountersunk1/8"6"No1104A62000001104A9100000
    3/16"1 1/8"1/4"1/16"RigidYesDullScrew InCountersunk1/8"6"No1104A68000001104A9600000
    3/16"1 5/16"1/4"1/16"RigidYesDullScrew InCountersunk1/8"6"No1104A72000001104A9700000
    13/64"15/16"17/64"1/16"RigidYesDullScrew InCountersunk1/8"6"No1104A66000001104A9400000
    31/64"7/8"35/64"1/16"RigidYesDullScrew InCountersunk1/8"6"No1104A74000001104A3100000
    31/64"1 9/16"35/64"1/16"RigidYesDullScrew InCountersunk1/8"6"No1104A76000001104A3200000
    Style 8
    Image of Product. Front orientation. Edge Trim. Aluminum Edge Trim, Style 8.
    Image of Attribute. Front orientation. Contains Annotated. Aluminum Edge Trim, Style 8.
    Outside
    Mounting Hole
    3 ft. Long
    6 ft. Long
    Inside
    Ht. (B)
    Wd.
    (C)
    Ht.
    (D)
    Thk.
    Flexibility
    For Use
    Outdoors
    Appearance
    Mount
    Type
    Style
    Dia.
    Ctr.-to-Ctr.
    Mounting Fasteners
    Included
    Each
    Each
    3/16"2 1/16"17/64"5/64"RigidYesDullScrew InCountersunk1/8"6"No1104A880000001104A84000000
    Style 9
    Image of Product. Front orientation. Edge Trim. Aluminum Edge Trim, Style 9.
    Image of Attribute. Front orientation. Contains Annotated. Aluminum Edge Trim, Style 9.
    Outside
    Stem
    3 ft. Long
    6 ft. Long
    Wd.
    (C)
    Ht.
    (D)
    Lg.
    Thk.
    Flexibility
    For Use
    Outdoors
    Appearance
    Mount
    Type
    Each
    Each
    3/4"5/64"3/8"3/32"RigidYesPolishedPush In1618A33000001618A4300000
    1 1/4"7/64"3/8"3/32"RigidYesPolishedPush In1618A3400001618A4400000
    Style 10
    Image of Product. Front orientation. Edge Trim. Aluminum Edge Trim, Style 10.
    Image of Attribute. Front orientation. Contains Annotated. Aluminum Edge Trim, Style 10.
    Outside
    Stem
    3 ft. Long
    6 ft. Long
    Wd.
    (C)
    Ht.
    (D)
    Lg.
    Thk.
    Flexibility
    For Use
    Outdoors
    Appearance
    Mount
    Type
    Each
    Each
    1 1/4"7/64"7/16"3/32"RigidYesPolishedPush In1618A31000001618A41000000
    1 1/2"3/32"3/8"1/8"RigidYesPolishedPush In1618A32000001618A4200000

    Fabric Grommets

    Add a protective metal ring to a hole so rope and cable don’t tear your tarp, cover, or curtain. To install, strike a cutting punch with a mallet to create the hole, then set the grommet using either an installation punch or a press. All of these grommets can be used outdoors. Installation tools are sold separately.
    Standard Washer
    Image of Product. Front orientation. Contains Annotated. Grommets. Fabric Grommets, Standard Washer.
    Aluminum—Keep large tarps and other surfaces lightweight where you're installing lots of grommets.
    Grommet Trade Size—Make sure your grommet, hole, and installation tools have the same trade size.
    Grommet
    Trade Size
    For Max.
    Material Thk.
    ID
    Flange
    Dia.
    Dp. Under
    Flange
    For Use
    Outdoors
    Pkg.
    Qty.
    Pkg.
    Aluminum
    000.063"3/16"0.425"0.135"Yes508264K200000
    00.101"1/4"0.545"0.175"Yes508264K110000
    10.108"9/32"0.687"0.185"Yes508264K120000
    20.14"3/8"0.815"0.215"Yes508264K130000
    30.219"7/16"0.97"0.295"Yes508264K1400000
    40.298"1/2"1.05"0.374"Yes508264K1500000
     
    Accessories for Grommets
    Installation and Cutting Punches
    Image of Product. Front orientation. Fabric Fastener Installation Tools. Hammer-Driven Installation Punch.

    Hammer-Driven

    Installation

    Punch

    Image of Product. Front orientation. Fabric Fastener Installation Tools. Hammer-Driven Cutting Punch.

    Hammer-Driven

    Cutting Punch

    Hammer-Driven Installation Punch—The economical choice if you’re installing a few grommets at a time. Align the grommet base, fabric, and washer on the die (included). A few sharp taps on the punch cinch the grommet in the hole. Use a rubber or rawhide mallet rather than a metal hammer to preserve the head of the punch.
    Hammer-Driven Cutting Punch—Create a hole in your fabric with a few sharp mallet taps on the cutting punch. Use a rubber or rawhide mallet rather than a metal hammer to preserve the head of the punch.
    For Grommet
    Trade Size
    For Hole
    Dia.
    Material
    Each
    Hammer-Driven Installation Punch
    003/16"9612K25000000
    01/4"9612K2600000
    19/32"9612K2700000
    23/8"9612K2800000
    37/16"9612K2900000
    41/2"9612K3100000
     
    Hammer-Driven Cutting Punch
    003/16"Steel9611K1100000
    01/4"Steel9611K1200000
    19/32"Steel9611K1300000
    23/8"Steel9611K1400000
    37/16"Steel9611K1500000
    41/2"Steel9611K1600000
     
    Manual Presses
    Image of Product. Front orientation. Contains Annotated. Fabric Fastener Installation Tools. Manual Press.

    Manual Press

    Manual Press—Saves time and effort if you’re frequently installing or replacing grommets. Install the required two-piece die set (sold separately) on the press, align the grommet in the hole, and squeeze the handle. For a longer service life, lubricate the handle and plunger with a drop of oil.
    Throat
    Max.
    Opening
    Dp.
    Wd.
    Material
    Each
    Manual Press
    7/8"3 1/4"1 3/4"Aluminum95720A6900000000
     
    Grommet Dies
    Image of Product. Front orientation. Grommet Dies.
    For Grommet
    Trade Size
    Hole
    Size
    Each
    003/16"95720A710000000
    01/4"95720A71500000
    19/32"95720A72000000
    23/8"95720A73000000
    37/16"95720A74000000

    Push-to-Hold Wall-Mount Door Holders

    Image of Product. Front orientation. Contains Annotated. Door Holders. Push-to-Hold Wall-Mount Door Holders, Style 1.

    Style 1

    Push your door open to automatically engage the holder; pull on the door to release.
    Style
    Material
    Projection
    Ht.
    Mounting Hardware
    Included
    Each
    1Polished Aluminum-Coated Aluminum2 1/4"2 3/8"Yes1420A13000000
     

    Reinforcing Door Edge Plates

    Image of Product. Front orientation. Door Edge Plates. Reinforcing Door Edge Plates.
    Fortify a door's base as well as its bottom edge to guard them against damage from foot traffic and equipment. These plates can also be used to salvage rusted, rotted, or otherwise damaged doors. All can be used outdoors. Mount them with fasteners.
    Aluminum—Aluminum plates are lightweight and have good corrosion resistance.
    Dull Aluminum
    Wd.
    For Door
    Thk.
    Kick Plate
    Ht.
    Thk.
    For Use
    Outdoors
    Mounting Fasteners
    Included
    Each
    29 1/2"1 3/4"7"0.05"YesYes1622A21000000
    31 1/2"1 3/4"7"0.05"YesYes1622A2200000
    35 1/2"1 3/4"7"0.05"YesYes1622A2300000
     

    Foot-Operated Door-Mount Door Holders

    Image of Product. Front orientation. Contains Annotated. Door Holders. Foot-Operated Door-Mount Door Holders, Style 2.
    Image of Product. Front orientation. Contains Annotated. Door Holders. Foot-Operated Door-Mount Door Holders, Style 3.

    Style 2

    Style 3

    Step on the spring-operated plunger to hold your door in place; tap on the release lever to free it. All have a nonmarring, replaceable rubber pad.
    Style 3—Styles 1 and 3 meet ANSI/BHMA 156.16 durability, strength, and performance standards for door controls.
    Door Holders
    Replacement
    Rubber Door Bumpers
    Style
    Material
    Plunger
    Extension
    Ht.
    Wd.
    Mounting Hardware
    Included
    Specs. Met
    Includes
    Each
    Pkg.
    Qty.
    Pkg.
    2Dull Aluminum-Coated Aluminum2 3/8"7"1 1/4"YesNonmarring Rubber Pad14045A9000000114045A95000000
    3Dull Aluminum-Coated Aluminum1 5/8"6 1/4"1 1/2"YesANSI/BHMA A156.16Nonmarring Rubber Pad1417A30000061417A900000
     
    back to top