System of Measurement System of Measurement |
|---|
|
Thickness Thickness |
|---|
|
|
|
Shape Shape |
|---|
 |  |
| Sheet and Bar | Round Tube |
 |  |
| Foil | Ring |
Material Material | Show |
|---|
|
Material Material | Hide |
|---|
Appearance Appearance |
|---|
|
Aluminum Performance Properties Aluminum PerformanceProperties |
|---|
|
Certificate Certificate |
|---|
 | |
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
Tolerance Rating Tolerance Rating |
|---|
|
Hardness Hardness |
|---|
|
Fabrication Fabrication |
|---|
|
Temper Rating Temper Rating |
|---|
|
Maximum Temperature Maximum Temperature |
|---|
|
Minimum Temperature Minimum Temperature |
|---|
|
Yield Strength Yield Strength |
|---|
|
Heat Treatable Heat Treatable |
|---|
|
Elongation Elongation |
|---|
|
About Aluminum
More
About Metal Tubing
More
About Perforated Sheets
More
Easy-to-Weld 5052 Aluminum Sheets and Bars
Known for being one of the easiest types of aluminum to weld, 5052 is also recognized for its ability to resist salt water. It's widely used for the bodies of boats, buses, trucks, and trailers, as well as for chemical drums.
Bars are saw cut to the widths and lengths listed.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.
- Yield Strength: 23,000 psi
- Hardness: Brinell 60 (Soft)
- Temper: H32 (1/4 Hard)
- Fabrication: Cold Rolled
- Specifications Met: ASTM B209
| Thick. | Thick. Tolerance | Temperature Range, °F | 2" × 24" | 4" × 24" | 6” × 6” | 6" × 12" | 6" × 24" | 12” × 12” | 12” × 24” | 24” × 24” | 24” × 48” | 48" × 48" | |
| 0.032" | -0.003" to 0.003" | -300° to 300° | 000000000 | ||||||||||
| 0.040" | -0.004" to 0.004" | -300° to 300° | 000000000 | ||||||||||
| 0.050" | -0.004" to 0.004" | -300° to 300° | 000000000 | ||||||||||
| 0.062" | -0.004" to 0.004" | -300° to 300° | 000000000 | ||||||||||
| 0.080" | -0.005" to 0.005" | -300° to 300° | 000000000 | ||||||||||
| 0.090" | -0.005" to 0.005" | -300° to 300° | 000000000 | ||||||||||
| 0.100" | -0.005" to 0.005" | -300° to 300° | 000000000 | ||||||||||
| 1/8" | -0.006" to 0.006" | -300° to 300° | 000000000 | ||||||||||
| 0.190" | -0.011" to 0.011" | -300° to 300° | 000000000 | ||||||||||
| 1/4" | -0.015" to 0.015" | -300° to 300° | 000000000 | ||||||||||
| 3/8" | -0.02" to 0.02" | -300° to 300° | 000000000 | ||||||||||
| 1/2" | -0.027" to 0.027" | -300° to 300° | 000000000 |
- Yield Strength: 28,000 psi
- Hardness: Brinell 60 (Soft)
- Temper: H32 (1/4 Hard)
- Fabrication: Cold Rolled
- Specifications Met: ASTM B209
| Width | Temperature Range, °F | 1/2 ft. Lg. | 1 ft. Lg. | 2 ft. Lg. | 3 ft. Lg. | 6 ft. Lg. | |
1/8" Thick. (-0.007" to 0.007" Tolerance) | |||||||
|---|---|---|---|---|---|---|---|
| 1/2" | -300° to 300° | 000000 | |||||
| 3/4" | -300° to 300° | 000000 | |||||
| 1" | -300° to 300° | 0000000 | |||||
| 1 1/4" | -300° to 300° | 000000 | |||||
| 1 1/2" | -300° to 300° | 0000000 | |||||
| 2" | -300° to 300° | 0000000 | |||||
| 2 1/2" | -300° to 300° | 0000000 | |||||
| 3" | -300° to 300° | 0000000 | |||||
| 4" | -300° to 300° | 0000000 | |||||
3/16" Thick. (-0.01" to 0.01" Tolerance) | |||||||
| 1" | -300° to 300° | 0000000 | |||||
| 1 1/2" | -300° to 300° | 0000000 | |||||
| 2" | -300° to 300° | 0000000 | |||||
| 2 1/2" | -300° to 300° | 0000000 | |||||
| 3" | -300° to 300° | 0000000 | |||||
| 4" | -300° to 300° | 0000000 | |||||
1/4" Thick. (-0.015" to 0.015" Tolerance) | |||||||
| 1/2" | -300° to 300° | 0000000 | |||||
| 3/4" | -300° to 300° | 0000000 | |||||
| 1" | -300° to 300° | 0000000 | |||||
| 1 1/4" | -300° to 300° | 0000000 | |||||
| 1 1/2" | -300° to 300° | 0000000 | |||||
| 2" | -300° to 300° | 0000000 | |||||
| 2 1/2" | -300° to 300° | 0000000 | |||||
| 3" | -300° to 300° | 0000000 | |||||
| 4" | -300° to 300° | 0000000 | |||||
Polished Easy-to-Weld 5052 Aluminum Sheets and Bars
- Yield Strength: 20,000 psi
- Temper: H32 (1/4 Hard)
- Fabrication: Cold Rolled
- Specifications Met: ASTM B209
One side of these sheets and bars is polished to either a brushed finish or a mirror-like finish. The polished side is covered with a protective, peel-off film. Known for being one of the easiest types of aluminum to weld, 5052 is also recognized for its ability to resist salt water. It's widely used for the bodies of boats, buses, trucks, and trailers, as well as for chemical drums.
Brushed sheets and bars are polished to a #4 satin finish with grain lines running in one direction to mask fingerprints.
Mirror-like sheets and bars are polished to a #8 reflective finish and are free of grain lines.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.
| Thick. | Thick. Tolerance | Temperature Range, °F | 2" × 24" | 4" × 24" | 6” × 6” | 6" × 12" | 6" × 24" | 12” × 12” | 12” × 24” | 24” × 24” | |
Brushed | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 0.032" | -0.003" to 0.003" | -300° to 300° | 00000000 | ||||||||
| 0.040" | -0.004" to 0.004" | -300° to 300° | 00000000 | ||||||||
| 0.050" | -0.004" to 0.004" | -300° to 300° | 00000000 | ||||||||
| 0.063" | -0.004" to 0.004" | -300° to 300° | 00000000 | ||||||||
| 0.080" | -0.005" to 0.005" | -300° to 300° | 00000000 | ||||||||
| 0.090" | -0.006" to 0.006" | -300° to 300° | 00000000 | ||||||||
| 0.100" | -0.006" to 0.006" | -300° to 300° | 00000000 | ||||||||
| 1/8" | -0.006" to 0.006" | -300° to 300° | 00000000 | ||||||||
| 0.190" | -0.009" to 0.009" | -300° to 300° | 00000000 | ||||||||
| 1/4" | -0.014" to 0.014" | -300° to 300° | 00000000 | ||||||||
Mirror-Like | |||||||||||
| 0.032" | -0.003" to 0.003" | -300° to 300° | 00000000 | ||||||||
| 0.040" | -0.004" to 0.004" | -300° to 300° | 00000000 | ||||||||
| 0.050" | -0.004" to 0.004" | -300° to 300° | 00000000 | ||||||||
| 0.063" | -0.004" to 0.004" | -300° to 300° | 00000000 | ||||||||
| 0.080" | -0.005" to 0.005" | -300° to 300° | 00000000 | ||||||||
| 0.090" | -0.005" to 0.005" | -300° to 300° | 00000000 | ||||||||
| 0.100" | -0.006" to 0.006" | -300° to 300° | 00000000 | ||||||||
| 1/8" | -0.006" to 0.006" | -300° to 300° | 00000000 | ||||||||
| 0.190" | -0.009" to 0.009" | -300° to 300° | 00000000 | ||||||||
| 1/4" | -0.014" to 0.014" | -300° to 300° | 00000000 | ||||||||
Easy-to-Weld 5052 Aluminum Tubes
- Yield Strength: 10,000 psi
- Hardness: Not Rated
- Temper: O (Annealed)
- Specifications Met: ASTM B210
Known for being one of the easiest types of aluminum to weld, 5052 is also recognized for its ability to resist salt water. It's widely used for the bodies of boats, buses, trucks, and trailers, as well as for chemical drums.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.
| OD | OD Tolerance | ID | ID Tolerance | Heat Treatment | Temperature Range, °F | Straightness Tolerance | 1 ft. Lg. | 3 ft. Lg. | 6 ft. Lg. | |
0.035" Wall Thick. (-0.002" to 0.002" Tolerance) | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 1/4" | -0.004" to 0.004" | 0.180" | -0.004" to0.004" | Annealed (Softened) | -300° to 300° | 0.500" per ft. | 0000000 | |||
| 3/8" | -0.004" to 0.004" | 0.305" | -0.004" to0.004" | Annealed (Softened) | -300° to 300° | 0.010" per ft. | 0000000 | |||
| 3/4" | -0.004" to 0.004" | 0.680" | -0.004" to0.004" | Annealed (Softened) | -300° to 300° | 0.010" per ft. | 0000000 | |||
| 1" | -0.004" to 0.004" | 0.930" | -0.004" to0.004" | Annealed (Softened) | -300° to 300° | 0.010" per ft. | 0000000 | |||
0.049" Wall Thick. (-0.003" to 0.003" Tolerance) | ||||||||||
| 1/4" | -0.004" to 0.004" | 0.152" | -0.004" to0.004" | Annealed (Softened) | -300° to 300° | 0.500" per ft. | 0000000 | |||
| 3/8" | -0.004" to 0.004" | 0.277" | -0.004" to0.004" | Annealed (Softened) | -300° to 300° | 0.010" per ft. | 0000000 | |||
| 1/2" | -0.004" to 0.004" | 0.402" | -0.004" to0.004" | Annealed (Softened) | -300° to 300° | 0.010" per ft. | 0000000 | |||
| 3/4" | -0.004" to 0.004" | 0.652" | -0.004" to0.004" | Annealed (Softened) | -300° to 300° | 0.010" per ft. | 0000000 | |||
| 1" | -0.004" to 0.004" | 0.902" | -0.004" to0.004" | Annealed (Softened) | -300° to 300° | 0.010" per ft. | 0000000 | |||
0.065" Wall Thick. (-0.004" to 0.004" Tolerance) | ||||||||||
| 1/2" | -0.004" to 0.004" | 0.370" | -0.004" to0.004" | Annealed (Softened) | -300° to 300° | 0.010" per ft. | 0000000 | |||
| 5/8" | -0.004" to 0.004" | 0.495" | -0.004" to0.004" | Annealed (Softened) | -300° to 300° | 0.010" per ft. | 0000000 | |||
| 1" | -0.004" to 0.004" | 0.870" | -0.004" to0.004" | Annealed (Softened) | -300° to 300° | 0.010" per ft. | 0000000 | |||
Ring Shims
Precisely align, level, and adjust spacing on fasteners, shafts, and machinery with these shims.
For accurate leveling, choose materials such as steel or stainless steel, which are hard enough to resist scratching and deforming. Softer shims, like copper or aluminum, can be used as wear plates between components that rub together, preventing damage to equipment.
Aluminum shims are lightweight and nonmagnetic. They have good corrosion resistance.
For technical drawings and 3-D models, click on a part number.
| ID | ID Tolerance | OD | OD Tolerance | Material | Min. Hardness | Pkg. Qty. | Pkg. | |
0.005" Thick. (-0.0005" to 0.0005" Tolerance) | ||||||||
|---|---|---|---|---|---|---|---|---|
| 1/4" | 0" to 0.011" | 3/8" | -0.002" to 0.002" | 5052 Aluminum | Not Rated | 10 | 000000000 | 00000 |
0.01" Thick. (-0.001" to 0.001" Tolerance) | ||||||||
| 1/4" | 0" to 0.011" | 3/8" | -0.002" to 0.002" | 5052 Aluminum | Not Rated | 10 | 000000000 | 0000 |
0.016" Thick. (-0.0015" to 0.0015" Tolerance) | ||||||||
| 1/4" | 0" to 0.011" | 3/8" | -0.002" to 0.002" | 5052 Aluminum | Not Rated | 10 | 000000000 | 0000 |
| 3/8" | 0" to 0.011" | 5/8" | -0.002" to 0.002" | 5052 Aluminum | Not Rated | 10 | 000000000 | 00000 |
| 1/2" | 0" to 0.011" | 3/4" | -0.002" to 0.002" | 5052 Aluminum | Not Rated | 10 | 000000000 | 00000 |
| 5/8" | 0" to 0.011" | 1" | -0.002" to 0.002" | 5052 Aluminum | Not Rated | 10 | 000000000 | 00000 |
| 3/4" | 0" to 0.011" | 1 1/8" | -0.002" to 0.002" | 5052 Aluminum | Not Rated | 10 | 000000000 | 0000 |
| 1" | 0" to 0.011" | 1 1/2" | -0.002" to 0.002" | 5052 Aluminum | Not Rated | 10 | 000000000 | 00000 |
0.02" Thick. (-0.002" to 0.002" Tolerance) | ||||||||
| 1/4" | 0" to 0.011" | 3/8" | -0.002" to 0.002" | 5052 Aluminum | Not Rated | 10 | 000000000 | 0000 |
| 3/8" | 0" to 0.011" | 5/8" | -0.002" to 0.002" | 5052 Aluminum | Not Rated | 10 | 000000000 | 0000 |
| 1/2" | 0" to 0.011" | 3/4" | -0.002" to 0.002" | 5052 Aluminum | Not Rated | 10 | 000000000 | 00000 |
| 5/8" | 0" to 0.011" | 1" | -0.002" to 0.002" | 5052 Aluminum | Not Rated | 10 | 000000000 | 00000 |
| 3/4" | 0" to 0.011" | 1 1/8" | -0.002" to 0.002" | 5052 Aluminum | Not Rated | 10 | 000000000 | 00000 |
| 1" | 0" to 0.011" | 1 1/2" | -0.002" to 0.002" | 5052 Aluminum | Not Rated | 10 | 000000000 | 00000 |
0.032" Thick. (-0.0025" to 0.0025" Tolerance) | ||||||||
| 1/4" | 0" to 0.011" | 3/8" | -0.002" to 0.002" | 5052 Aluminum | Not Rated | 10 | 000000000 | 00000 |
| 3/8" | 0" to 0.011" | 5/8" | -0.002" to 0.002" | 5052 Aluminum | Not Rated | 10 | 000000000 | 00000 |
| 1/2" | 0" to 0.011" | 3/4" | -0.002" to 0.002" | 5052 Aluminum | Not Rated | 10 | 000000000 | 00000 |
| 5/8" | 0" to 0.011" | 1" | -0.002" to 0.002" | 5052 Aluminum | Not Rated | 10 | 000000000 | 00000 |
| 3/4" | 0" to 0.011" | 1 1/8" | -0.002" to 0.002" | 5052 Aluminum | Not Rated | 10 | 000000000 | 00000 |
| 1" | 0" to 0.011" | 1 1/2" | -0.002" to 0.002" | 5052 Aluminum | Not Rated | 10 | 000000000 | 00000 |
0.063" Thick. (-0.0035" to 0.0035" Tolerance) | ||||||||
| 1/4" | 0" to 0.011" | 3/8" | -0.002" to 0.002" | 5052 Aluminum | Not Rated | 10 | 000000000 | 0000 |
| 3/8" | 0" to 0.011" | 5/8" | -0.002" to 0.002" | 5052 Aluminum | Not Rated | 10 | 000000000 | 0000 |
| 1/2" | 0" to 0.011" | 3/4" | -0.002" to 0.002" | 5052 Aluminum | Not Rated | 10 | 000000000 | 0000 |
| 5/8" | 0" to 0.011" | 1" | -0.002" to 0.002" | 5052 Aluminum | Not Rated | 10 | 000000000 | 00000 |
| 3/4" | 0" to 0.011" | 1 1/8" | -0.002" to 0.002" | 5052 Aluminum | Not Rated | 10 | 000000000 | 0000 |
| 1" | 0" to 0.011" | 1 1/2" | -0.002" to 0.002" | 5052 Aluminum | Not Rated | 10 | 000000000 | 00000 |
1/8" Thick. (-0.007" to 0.007" Tolerance) | ||||||||
| 3/8" | 0" to 0.011" | 5/8" | -0.002" to 0.002" | 5052 Aluminum | Not Rated | 5 | 000000000 | 0000 |
| 1/2" | 0" to 0.011" | 3/4" | -0.002" to 0.002" | 5052 Aluminum | Not Rated | 5 | 000000000 | 00000 |
| 5/8" | 0" to 0.011" | 1" | -0.002" to 0.002" | 5052 Aluminum | Not Rated | 5 | 000000000 | 00000 |
| 3/4" | 0" to 0.011" | 1 1/8" | -0.002" to 0.002" | 5052 Aluminum | Not Rated | 5 | 000000000 | 00000 |
Aluminum Perforated Sheets
Aluminum is lightweight. These sheets have good corrosion resistance, weldability, and formability.
Grade 5052 aluminum is more corrosion resistant than Grade 3003, and is good for use in saltwater environments. It’s also harder and stronger for greater wear resistance. It’s often used in storage tanks, pressure vessels, and marine applications.
24" × 24" | 48" × 48" | |||||
|---|---|---|---|---|---|---|
| Hole Dia. | Open Area | Hole Center-to-Center | Each | Each | ||
5052 Aluminum Sheets—Staggered Holes | ||||||
0.032" Thick. (20 Gauge) | ||||||
| 0.0625" | 23% | 0.125" | 0000000 | 000000 | 0000000 | 0000000 |
| 0.0625" | 30% | 0.109" | 0000000 | 00000 | 0000000 | 000000 |
| 0.125" | 40% | 0.188" | 0000000 | 00000 | 0000000 | 000000 |
| 0.1875" | 51% | 0.25" | 0000000 | 00000 | 0000000 | 000000 |
| 0.25" | 40% | 0.375" | 0000000 | 00000 | 0000000 | 000000 |
| 0.25" | 58% | 0.313" | 0000000 | 00000 | 0000000 | 000000 |
0.05" Thick. (16 Gauge) | ||||||
| 0.0625" | 23% | 0.125" | 0000000 | 00000 | 0000000 | 000000 |
| 0.0625" | 30% | 0.109" | 0000000 | 00000 | 0000000 | 000000 |
| 0.125" | 40% | 0.188" | 0000000 | 00000 | 0000000 | 000000 |
| 0.1875" | 51% | 0.25" | 0000000 | 00000 | 0000000 | 000000 |
| 0.25" | 40% | 0.375" | 0000000 | 00000 | 0000000 | 000000 |
| 0.25" | 58% | 0.313" | 0000000 | 00000 | 0000000 | 000000 |
0.063" Thick. (14 Gauge) | ||||||
| 0.125" | 40% | 0.188" | 0000000 | 00000 | 0000000 | 000000 |
| 0.1875" | 51% | 0.25" | 0000000 | 00000 | 0000000 | 000000 |
| 0.25" | 40% | 0.375" | 0000000 | 00000 | 0000000 | 000000 |
| 0.25" | 58% | 0.313" | 0000000 | 00000 | 0000000 | 000000 |
0.125" Thick. (8 Gauge) | ||||||
| 0.125" | 40% | 0.188" | 0000000 | 000000 | 0000000 | 000000 |
| 0.1875" | 51% | 0.25" | 0000000 | 000000 | 0000000 | 000000 |
| 0.25" | 40% | 0.375" | 0000000 | 000000 | 0000000 | 000000 |
| 0.25" | 58% | 0.313" | 0000000 | 000000 | 0000000 | 000000 |
Ultra-Corrosion-Resistant Aluminum Tubing
- Temperature Range: -450° to 400° F
- Bending Method: Tube Bender
- Compatible Tube Fittings: Flared
Commonly used in marine applications, this tubing contains magnesium for excellent corrosion resistance. It is seamless, which provides a smooth interior for unrestricted flow. It can be flared without splitting.
For technical drawings and 3-D models, click on a part number.
| OD | Wall Thick. | ID | Max. Pressure | Temper Rating | Specifications Met | 1 ft. | 3 ft. | 6 ft. | |
For Use With Hydraulic Fluid and Salt Water | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 3/16" | 0.028" | 0.132" | 1,600 psi @ 72° F | Soft | ASTM B210, SAE AMS4070 | 0000000 | |||
| 3/16" | 0.035" | 0.118" | 2,000 psi @ 72° F | Soft | ASTM B210, SAE AMS4070 | 0000000 | |||
| 1/4" | 0.028" | 0.194" | 1,200 psi @ 72° F | Soft | ASTM B210, SAE AMS4070 | 0000000 | |||
| 1/4" | 0.035" | 0.18" | 1,500 psi @ 72° F | Soft | ASTM B210, SAE AMS4070 | 0000000 | |||
| 5/16" | 0.035" | 0.243" | 1,200 psi @ 72° F | Soft | ASTM B210, SAE AMS4070 | 0000000 | |||
| 3/8" | 0.028" | 0.319" | 820 psi @ 72° F | Soft | ASTM B210, SAE AMS4070 | 0000000 | |||
| 3/8" | 0.035" | 0.305" | 1,000 psi @ 72° F | Soft | ASTM B210, SAE AMS4070 | 0000000 | |||
| 3/8" | 0.049" | 0.277" | 1,400 psi @ 72° F | Soft | ASTM B210, SAE AMS4070 | 0000000 | |||
| 1/2" | 0.02" | 0.46" | 440 psi @ 72° F | Soft | ASTM B210, SAE AMS4070 | 0000000 | |||
| 1/2" | 0.035" | 0.43" | 770 psi @ 72° F | Soft | ASTM B210, SAE AMS4070 | 0000000 | |||
| 1/2" | 0.049" | 0.402" | 1,000 psi @ 72° F | Soft | ASTM B210, SAE AMS4070 | 0000000 | |||
| 5/8" | 0.035" | 0.555" | 620 psi @ 72° F | Soft | ASTM B210, SAE AMS4070 | 0000000 | |||
| 5/8" | 0.049" | 0.527" | 870 psi @ 72° F | Soft | ASTM B210, SAE AMS4070 | 0000000 | |||
| 3/4" | 0.028" | 0.694" | 410 psi @ 72° F | Soft | ASTM B210, SAE AMS4070 | 0000000 | |||
| 3/4" | 0.035" | 0.68" | 510 psi @ 72° F | Soft | ASTM B210, SAE AMS4070 | 0000000 | |||
| 3/4" | 0.049" | 0.652" | 720 psi @ 72° F | Soft | ASTM B210, SAE AMS4070 | 0000000 | |||