Apply this thread sealant stick without a mess.

Formulated for high lubricity, these sealants allow easy assembly of finely threaded hydraulic and compressed air system components. They're also free of fillers that could contaminate system media.

Use cartridges with a standard caulk gun for quick and easy dispensing.

All the benefits of a gasket maker in a no-drip form.

Use cartridges with a standard caulk gun for quick and easy dispensing.

Use these threadlockers on fasteners that require occasional fine-tuning, such as set screws.

These threadlockers develop usable strength within one hour. Because they harden quickly on most metals, they don't require a primer.

Secure threaded fasteners at temperature extremes—from -300° F to 2100° F.

These low-friction threadlockers harden slowly, allowing ample time to smoothly adjust multiple large bolts for even clamping.

This gel clings to fasteners to prevent drips.

This thick paste withstands temperatures up to 650 °F.

Coat fasteners ahead of time and store until ready to use. Upon installation, tiny capsules rupture to release the threadlocker.

Apply these threadlockers on fasteners that are already installed—their thin consistency allows them to flow into small gaps.

These threadlockers withstand temperatures up to 450° F.

Even on oily surfaces, these retaining compounds keep their hold.

Fill gaps up to 0.02" to secure worn unthreaded cylindrical metal parts such as shafts, bearings, and press-fit assemblies.