Movement Movement |
|---|
 |  |
| 90° Pivot | 180° Pivot |
 |  |
| 360° Swivel | Rigid |
Capacity Capacity |
|---|
|
Load Securement Type Load Securement Type |
|---|
 |  |
| Anchor Point | Track System |
Material Material |
|---|
|
Ring Material Ring Material |
|---|
|
Base Material Base Material |
|---|
|
Finish Finish |
|---|
|
Mounting Hole Center-to-Center Length Mounting Hole Center-to-Center Length |
|---|
|
|
Track Type Track Type |
|---|
|
Webbing Anchor Plates
Sew webbing onto these plates for a permanent anchor point or run webbing through to use them as guides.
Zinc-plated steel plates have mild corrosion resistance.
18-8 stainless steel plates have good corrosion resistance.
Warning: Never use for lifting applications.
For technical drawings and 3-D models, click on a part number.
Recessed Tie-Down Rings
These rings mount flush and fold down when not in use.
Straight rings have a flat section that prevents webbing from twisting.
Warning: Never use for lifting applications.
For technical drawings and 3-D models, click on a part number.
For Cutout | Ring | Base | Mounting Hole | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Capacity, lbs. | Dp. | Lg. | Wd. | Dia. | For Max. Webbing Wd. | Inner Wd. | Ht. | Thick. | Lg. | Wd. | Dia. | Material | Mounting Fasteners Included | Dia. | Ctr.-to-Ctr. Wd. | Ctr.-to-Ctr. Lg. | No. of | Specifications Met | Each | |
Zinc-Plated Steel | ||||||||||||||||||||
Round Ring | ||||||||||||||||||||
| 1,660 | 1" | 2 7/8" | 2 7/8" | __ | __ | 1 3/8" | 1 3/4" | 7/16" | 4 7/8" | 4 1/2" | __ | Zinc-Plated Steel | No | 13/32" | 3" | 3 1/4" | 4 | __ | 0000000 | 00000 |
D-Ring | ||||||||||||||||||||
| 2,000 | 1" | __ | __ | 4 1/2" | __ | 3 3/8" | 1 13/16" | 5/16" | __ | __ | 6 1/4" | Zinc-Plated Steel | No | 11/32" | 3 13/16" | 3 13/16" | 4 | __ | 0000000 | 00000 |
D-Ring and Straight Ring | ||||||||||||||||||||
| 830 | 1" | __ | __ | 4 1/2" | 2" | 2 7/8", 2 1/8" | 1 1/2", 1 3/16" | 3/8", 3/8" | __ | __ | 6 1/4" | Zinc-Plated Steel | No | 11/32" | 3 13/16" | 3 13/16" | 4 | MS209J | 0000000 | 00000 |
Dimpled Tie-Down Rings
Dimples hold the base tight to prevent it from swiveling.
Style B has loose rings that twist to minimize abrasion on webbing and rope.
Zinc-plated steel rings have mild corrosion resistance.
304 stainless steel rings have good corrosion resistance.
2205 stainless steel rings have excellent chemical and corrosion resistance, so they won’t rust in marine environments. They also resist cracking even when faced with a combination of high stress, corrosive chemicals, and heat.
Warning: Never use for lifting applications.
Ring | Base | Mounting Holes | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Capacity, lbs. | Inner Wd. | Ht. | Thick. | Style | Lg. | Wd. | Material | Mounting Fasteners Included | No. of | Dia. | Each | |
Style A | ||||||||||||
Zinc-Plated Steel—Grade 80 | ||||||||||||
| 5,600 | 1 1/4" | 1 1/4" | 1/2" | Round | 2 3/8" | 2" | Zinc-Plated Steel—Grade 80 | No | 1 | 3/8" | 00000000 | 00000 |
304 Stainless Steel | ||||||||||||
| 6,700 | 1 3/16" | 1 1/4" | 1/2" | Round | 2 3/8" | 1 11/16" | 304 Stainless Steel | No | 1 | 3/8" | 00000000 | 0000 |
2205 Stainless Steel | ||||||||||||
| 9,000 | 1 1/4" | 1 1/4" | 1/2" | Round | 2 3/8" | 2" | 2205 Stainless Steel | No | 1 | 3/8" | 00000000 | 0000 |
Style B | ||||||||||||
Zinc-Plated Steel—Grade 80 | ||||||||||||
| 5,600 | 1 1/4" | 3 3/4" | 3/8" | Round | 2 3/8" | 2" | Zinc-Plated Steel—Grade 80 | No | 1 | 3/8" | 00000000 | 00000 |
304 Stainless Steel | ||||||||||||
| 7,000 | 1 1/4" | 3 3/4" | 3/8" | Round | 2 3/8" | 2" | 304 Stainless Steel | No | 1 | 3/8" | 00000000 | 00000 |
2205 Stainless Steel | ||||||||||||
| 7,800 | 1 1/4" | 3 3/4" | 3/8" | Round | 2 3/8" | 2" | 2205 Stainless Steel | No | 1 | 3/8" | 00000000 | 00000 |
Swiveling Tie-Down Rings
Accommodate ties in any direction with these rings that swivel all the way around.
Style B has a loose ring that twists to minimize abrasion on webbing and rope.
Warning: Never use for lifting applications.
For technical drawings and 3-D models, click on a part number.
Ring | Base | Mounting Holes | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | Capacity, lbs. | Inner Wd. | Ht. | Thick. | Style | Lg. | Wd. | Material | Mounting Fasteners Included | No. of | Dia. | Ctr.-to-Ctr. Lg. | Ctr.-to-Ctr. Wd. | Each | |
18-8 Stainless Steel | |||||||||||||||
| A | 200 | 5/8" | 1 9/32" | 3/16" | Round | 1 3/16" | 1 1/4" | 18-8 Stainless Steel | No | 4 | 3/16" | 7/8" | 11/16" | 0000000 | 00000 |
| A | 300 | 3/4" | 1 9/16" | 1/4" | Round | 1 9/16" | 1 5/16" | 18-8 Stainless Steel | No | 4 | 3/16" | 1" | 3/4" | 0000000 | 0000 |
| A | 480 | 3/4" | 1 13/16" | 5/16" | Round | 1 15/16" | 1 9/16" | 18-8 Stainless Steel | No | 4 | 3/16" | 1 3/8" | 1" | 0000000 | 0000 |
| B | 200 | 1 3/16" | 2 1/2" | 3/16" | Round | 1 3/16" | 1 1/4" | 18-8 Stainless Steel | No | 4 | 3/16" | 7/8" | 11/16" | 00000000 | 0000 |
| B | 300 | 1 9/16" | 3 1/8" | 1/4" | Round | 1 9/16" | 1 5/16" | 18-8 Stainless Steel | No | 4 | 3/16" | 1" | 3/4" | 00000000 | 0000 |
| B | 480 | 1 15/16" | 3 3/4" | 5/16" | Round | 1 15/16" | 1 9/16" | 18-8 Stainless Steel | No | 4 | 3/16" | 1 3/8" | 1" | 00000000 | 00000 |
Tie-Down Rings
These rings pivot to secure loads in various directions.
Style N has a loose ring that twists to minimize abrasion on webbing and rope.
2205 stainless steel rings are stronger than 316 stainless steel rings, while also providing excellent corrosion resistance.
Warning: Never use for lifting applications.
For technical drawings and 3-D models, click on a part number.
Ring | Base | Mounting Holes | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | Capacity, lbs. | Inner Wd. | Ht. | Thick. | Style | Lg. | Wd. | Material | Mounting Fasteners Included | No. of | Dia. | Each | |
2205 Stainless Steel | |||||||||||||
| N | 6,750 | 1 5/16" | 3 1/4" | 11/16" | Round | 2 1/16" | 2" | 2205 Stainless Steel | No | 1 | 3/8" | 00000000 | 000000 |
Quick-Adjust Load-Securing Plates
When full lengths of track won't fit, use this plate to mount accessories that have a single mounting point. Use it with straps, mounting studs and other accessories that work with logistics or L-track load-securing systems.
Warning: Never use for lifting applications.
For technical drawings and 3-D models, click on a part number.
| Dia. | No. of Mounting Points | Mounting Fasteners Included | Mounting Hole Dia. | Each | |
Aluminum | |||||
|---|---|---|---|---|---|
| 1 3/4" | 1 | No | 3/16" | 00000000 | 000000 |
Quick-Adjust Load-Securing Track
Slide fittings between slots on this track for quick adjustments. Also known as logistics track or L-track. Use track with straps, mounting studs, and other accessories as part of a system for load securing.
Warning: Never use for lifting applications.
For technical drawings and 3-D models, click on a part number.
| Lg., ft. | Wd. | No. of Mounting Points | Mounting Fasteners Included | Mounting Hole Dia. | Ctr.-to-Ctr. Slot Lg. | Specifications Met | Each | |
Aluminum | ||||||||
|---|---|---|---|---|---|---|---|---|
| 2 | 1 3/8" | 23 | No | 1/4" | 1" | MS33601 | 00000000 | 000000 |
| 4 | 1 3/8" | 47 | No | 1/4" | 1" | MS33601 | 00000000 | 00000 |
| 6 | 1 3/8" | 71 | No | 1/4" | 1" | MS33601 | 00000000 | 00000 |
| 8 | 1 3/8" | 95 | No | 1/4" | 1" | MS33601 | 00000000 | 00000 |
| 12 | 1 3/8" | 142 | No | 1/4" | 1" | MS33601 | 00000000 | 00000 |
Snap-In Load-Securing Plates
Also known as E-track, use these plates for a tie-down system in places where full lengths of track won't fit.
Snap straps, anchor points, and other accessories into Style A, B, and C plates.
Zinc-plated steel plates have mild corrosion resistance.
18-8 stainless steel plates have good corrosion resistance.
For technical drawings and 3-D models, click on a part number.
| Style | Capacity, lbs. | Lg. | Wd. | Color | Mounting Fasteners Included | Mounting Hole Lg. | Mounting Hole Wd. | Ctr.-to-Ctr. Slot Lg. | Each | |
Powder-Coated Steel | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| A | Not Rated | 1" | 5 3/4" | Black | No | 5/16" | 5/16" | __ | 00000000 | 00000 |
Zinc-Plated Low-Carbon Steel | ||||||||||
| B | 1,000 | 1" | 4 1/2" | __ | __ | __ | __ | __ | 00000000 | 0000 |
Zinc-Plated Steel | ||||||||||
| A | Not Rated | 1" | 5 3/4" | __ | No | 5/16" | 5/16" | __ | 00000000 | 0000 |
| C | Not Rated | 5 1/4" | 6 3/8" | __ | Yes | 13/32" | 13/32" | 2" | 00000000 | 00000 |
18-8 Stainless Steel | ||||||||||
| A | Not Rated | 1" | 5 3/4" | __ | No | 5/16" | 5/16" | __ | 00000000 | 0000 |