Plug Anchors | McMaster-Carr

Clear All

	Anchor Type Anchor Type	Show

	Plug

	Anchor Type Anchor Type	Hide

	Stud
	Plug
	Female Threaded
	Toggle
	Tapping Screw
	Drive
	Wedge Eyebolt
	Hook
	Bolt
	Toggle Eyebolt
	Tube

	For Use In For Use In

	Material Material

	System of Measurement System of Measurement

Inch

	Length Length

	For Screw Size For Screw Size

	Screw Size Screw Size

	Color Color

	Off-White		Blue
	White		Orange
	Red		Green
	Gray		Yellow

	Drill Bit Size Drill Bit Size

	Drive Style Drive Style


Phillips	Slotted

	Head Type Head Type


Rounded	Hex

	Screw Length Screw Length

	Pull-Out Strength Pull-Out Strength

Less than 1,000 lbs.

1,000 to 1,999 lbs.

Not Rated

	For Maximum Wall Thickness For Maximum Wall Thickness

	Removable Removable

Permanent

Removable

	Shear Strength Shear Strength

Less than 1,000 lbs.

Not Rated

	Drill Bit Decimal Size Equivalent Drill Bit Decimal Size Equivalent

	DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense Acquisition Regulations Supplement)

DFARS Specialty Metals
COTS-Exempt

	Minimum Temperature Minimum Temperature

	Maximum Temperature Maximum Temperature

Less than 200° F

200° to 249° F

Not Rated

	RoHS (Restriction of Hazardous Substances) RoHS (Restriction of Hazardous Substances)

RoHS Compliant

RoHS Compliant with
Exemptions

	Thread Direction Thread Direction

	Right Hand

	REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration, Evaluation, Authorization and Restriction of Chemicals)

REACH Compliant

Forward

How can we improve?

85 Products

Flanged Plastic Anchors with Screw for Block and Brick

A flange keeps the anchor from being pushed through a hole. Also known as alligator plugs, these anchors split in half when a screw is inserted to reinforce the hole and resist stripping. To install, drill a hole slightly deeper than the anchor is long and insert the anchor until it's flush with the surface. Next, thread a sheet metal or wood screw through your fixture and into the anchor. Length includes the flange. Pull-out strength values are 25% of the ultimate values.

For technical drawings and 3-D models, click on a part number.

Screw						Strength, lbs.
Size	Lg.	Lg.	Drill Bit Size	Color	Temperature Range, °F	Pull-Out	Shear	Tested In	Drive Style	For Use In	Pkg. Qty.		Pkg.
Polypropylene Plastic
No. 10	1 1/2"	1 3/16"	1/4"	Off-White	-20° to 210°	160	Not Rated	3,500 psi Concrete	Slotted/Phillips	Block, Brick, Concrete, Stone	50	000000000	000000

Flanged Plastic Anchors for Block and Brick

A flange keeps the anchor from being pushed through a hole. Also known as alligator plugs, these anchors split in half when a screw is inserted to reinforce the hole and resist stripping. To install, drill a hole slightly deeper than the anchor is long and insert the anchor until it's flush with the surface. Next, thread a sheet metal or wood screw through your fixture and into the anchor. To determine screw length, add the anchor length to the fixture thickness and choose a screw longer than this. Length includes the flange. Pull-out strength values are 25% of the ultimate values.

For technical drawings and 3-D models, click on a part number.

					Strength, lbs.
For Screw Size	Lg.	Drill Bit Size	Color	Temperature Range, °F	Pull-Out	Shear	Tested In	For Use In	Pkg. Qty.		Pkg.
Polypropylene Plastic
No. 4, No. 5, No. 6, No. 7, No. 8, No. 9	1"	3/16"	Off-White	-20° to 210°	120	Not Rated	3,500 psi Concrete	Block, Brick, Concrete, Stone	50	000000000	00000
No. 6, No. 7, No. 8, No. 9, No. 10, No. 11, No. 12	1 3/16"	1/4"	Off-White	-20° to 210°	160	Not Rated	3,500 psi Concrete	Block, Brick, Concrete, Stone	50	000000000	00000
No. 8, No. 9, No. 10, No. 11, No. 12, No. 14	1 5/8"	5/16"	Off-White	-20° to 210°	250	Not Rated	3,500 psi Concrete	Block, Brick, Concrete, Stone	25	000000000	0000

Flush-Mount Plastic Anchors for Block and Brick

Also known as alligator plugs, these anchors split in half when a screw is inserted to reinforce the hole and resist stripping. To install, drill a hole slightly deeper than the anchor is long and insert the anchor until it's flush with the surface. Next, thread a sheet metal or wood screw through your fixture and into the anchor. To determine screw length, add the anchor length to the fixture thickness and choose a screw longer than this. Pull-out strength values are 25% of the ultimate values.

For technical drawings and 3-D models, click on a part number.

					Strength, lbs.
For Screw Size	Lg.	Drill Bit Size	Color	Temperature Range, °F	Pull-Out	Shear	Tested In	For Use In	Pkg. Qty.		Pkg.
Polypropylene Plastic
No. 4, No. 5, No. 6, No. 7, No. 8, No. 9	15/16"	3/16"	Off-White	-20° to 210°	120	Not Rated	3,500 psi Concrete	Block, Brick, Concrete, Stone	50	000000000	00000
No. 6, No. 7, No. 8, No. 9, No. 10, No. 11, No. 12	1 1/8"	1/4"	Off-White	-20° to 210°	160	Not Rated	3,500 psi Concrete	Block, Brick, Concrete, Stone	50	000000000	00000
No. 8, No. 9, No. 10, No. 11, No. 12, No. 14	1 9/16"	5/16"	Off-White	-20° to 210°	250	Not Rated	3,500 psi Concrete	Block, Brick, Concrete, Stone	25	000000000	0000

High-Strength Twist-Resistant Plastic Anchors for Block and Brick

A lobed shape makes these anchors more twist and pull-out resistant than other plastic anchors for block and brick. They reinforce the hole and resist stripping. To install, drill a hole slightly deeper than the anchor is long and insert the anchor until it's flush with the surface. Next, thread a sheet metal or wood screw through your fixture and into the anchor. To determine screw length, add the anchor length to the fixture thickness and choose a screw longer than this. Pull-out strength values are 25% of the ultimate values.

For technical drawings and 3-D models, click on a part number.

					Strength, lbs.
For Screw Size	Lg.	Drill Bit Size	Color	Temperature Range, °F	Pull-Out	Shear	Tested In	For Use In	Pkg. Qty.		Pkg.
PVC Plastic
No. 4	1"	5/32"	Yellow	0° to 120°	40	Not Rated	2,000 psi Concrete	Block, Brick, Concrete	100	000000000	00000
No. 6	1"	3/16"	White	0° to 120°	180	Not Rated	2,000 psi Concrete	Block, Brick, Concrete	100	000000000	0000
No. 6	1 1/2"	3/16"	White	0° to 120°	200	Not Rated	2,000 psi Concrete	Block, Brick, Concrete	100	000000000	0000
No. 8	1"	15/64"	Red	0° to 120°	220	Not Rated	2,000 psi Concrete	Block, Brick, Concrete	100	000000000	0000
No. 8	1 1/2"	15/64"	Red	0° to 120°	240	Not Rated	2,000 psi Concrete	Block, Brick, Concrete	100	000000000	0000
No. 10	1"	1/4"	Green	0° to 120°	250	Not Rated	2,000 psi Concrete	Block, Brick, Concrete	100	000000000	0000
No. 10	1 1/2"	1/4"	Green	0° to 120°	370	Not Rated	2,000 psi Concrete	Block, Brick, Concrete	100	000000000	00000
No. 10	2"	1/4"	Green	0° to 120°	520	Not Rated	2,000 psi Concrete	Block, Brick, Concrete	100	000000000	00000
No. 14, 1/4"	1"	5/16"	Blue	0° to 120°	300	Not Rated	2,000 psi Concrete	Block, Brick, Concrete	100	000000000	00000
No. 14, 1/4"	1 1/2"	5/16"	Blue	0° to 120°	420	Not Rated	2,000 psi Concrete	Block, Brick, Concrete	100	000000000	00000
No. 14, 1/4"	2"	5/16"	Blue	0° to 120°	570	Not Rated	2,000 psi Concrete	Block, Brick, Concrete	100	000000000	00000
No. 16, 5/16"	1 1/2"	3/8"	Orange	0° to 120°	370	Not Rated	2,000 psi Concrete	Block, Brick, Concrete	100	000000000	00000
No. 16, 5/16"	2 1/2"	3/8"	Orange	0° to 120°	620	Not Rated	2,000 psi Concrete	Block, Brick, Concrete	100	000000000	00000
No. 20, 3/8"	1 1/2"	7/16"	Gray	0° to 120°	1,050	Not Rated	2,000 psi Concrete	Block, Brick, Concrete	50	000000000	00000
No. 20, 3/8"	2"	7/16"	Gray	0° to 120°	1,200	Not Rated	2,000 psi Concrete	Block, Brick, Concrete	50	000000000	00000
No. 20, 3/8"	3"	7/16"	Gray	0° to 120°	1,600	Not Rated	2,000 psi Concrete	Block, Brick, Concrete	50	000000000	00000

High-Strength Twist-Resistant Plastic Anchors with Screw for Block and Brick

A lobed shape makes these anchors more twist and pull-out resistant than other plastic anchors for block and brick. They reinforce the hole and resist stripping. To install, drill a hole slightly deeper than the anchor is long and insert the anchor until it's flush with the surface. Next, thread a sheet metal or wood screw through your fixture and into the anchor. Pull-out strength values are 25% of the ultimate values.

For technical drawings and 3-D models, click on a part number.

Screw						Strength, lbs.
Size	Lg.	Lg.	Drill Bit Size	Color	Temperature Range, °F	Pull-Out	Shear	Tested In	Drive Style	For Use In	Pkg. Qty.		Pkg.
PVC Plastic
No. 6	1"	1"	3/16"	White	0° to 120°	180	Not Rated	2,000 psi Concrete	Slotted/Phillips	Block, Brick, Concrete	100	000000000	000000
No. 8	1"	1"	15/64"	Red	0° to 120°	270	Not Rated	2,000 psi Concrete	Slotted/Phillips	Block, Brick, Concrete	100	000000000	00000
No. 10	1"	1"	1/4"	Green	0° to 120°	250	Not Rated	2,000 psi Concrete	Slotted/Phillips	Block, Brick, Concrete	100	000000000	00000
No. 14	1 1/2"	1 1/2"	5/16"	Blue	0° to 120°	420	Not Rated	2,000 psi Concrete	Slotted/Phillips	Block, Brick, Concrete	50	000000000	00000

Twist-Resistant Plastic Anchors for Block and Brick

Also known as mungo anchors, these have large fins that prevent rotation. They reinforce the hole and resist stripping. To install, drill a hole slightly deeper than the anchor is long and insert the anchor until it's flush with the surface. Next, thread a sheet metal or wood screw through your fixture and into the anchor. To determine screw length, add the anchor length to the fixture thickness and choose a screw longer than this. Pull-out strength values are 25% of the ultimate values.

For technical drawings and 3-D models, click on a part number.

					Strength, lbs.
For Screw Size	Lg.	Drill Bit Size	Color	Temperature Range, °F	Pull-Out	Shear	Tested In	For Use In	Pkg. Qty.		Pkg.
Nylon Plastic
No. 4, No. 5, No. 6	1"	3/16"	Orange	-100° to 175°	60	Not Rated	Solid Brick	Block, Brick, Stone	100	000000000	00000
No. 8, No. 9, No. 10	1 3/16"	7/32"	Orange	-100° to 175°	100	Not Rated	Solid Brick	Block, Brick, Stone	100	000000000	0000
No. 10, No. 11, No. 12	1 1/2"	5/16"	Orange	-100° to 175°	170	Not Rated	Solid Brick	Block, Brick, Stone	100	000000000	00000
1/4", 5/16"	2"	3/8"	Orange	-100° to 175°	210	Not Rated	Solid Brick	Block, Brick, Stone	50	000000000	00000

Metal Anchors for Block and Brick

These anchors expand and distort when a screw is inserted to reinforce the hole and resist stripping. To install, drill a hole slightly deeper than the anchor is long and insert the anchor until it's flush with the surface. Then, thread a sheet metal or wood screw through your fixture and into the anchor. To determine screw length, add the anchor length to the fixture thickness and choose a screw longer than this. Pull-out strength values are 25% of the ultimate values.

For technical drawings and 3-D models, click on a part number.

			Strength, lbs.
For Screw Size	Lg.	Drill Bit Size	Pull-Out	Shear	Tested In	For Use In	Pkg. Qty.		Pkg.
Lead
No. 6, No. 7, No. 8	3/4"	1/4"	20	Not Rated	3,000 psi Concrete	Block, Brick, Concrete	25	000000000	00000
No. 6, No. 7, No. 8	1"	1/4"	20	Not Rated	3,000 psi Concrete	Block, Brick, Concrete	25	000000000	00000
No. 6, No. 7, No. 8	1 1/2"	1/4"	25	Not Rated	3,000 psi Concrete	Block, Brick, Concrete	25	000000000	00000
No. 10, No. 12, No. 14	1"	5/16"	40	Not Rated	3,000 psi Concrete	Block, Brick, Concrete	25	000000000	00000
No. 10, No. 12, No. 14	1 1/2"	5/16"	135	Not Rated	3,000 psi Concrete	Block, Brick, Concrete	10	000000000	00000
No. 16, No. 17, No. 18	1 1/2"	3/8"	250	Not Rated	4,000 psi Concrete	Block, Brick, Concrete	10	000000000	00000

Wood-Screw-Threaded Metal Anchors for Block and Brick

Also known as lag shields, these anchors are designed to be used with large-diameter wood screws. They reinforce the hole and resist stripping. Most diameters are available in two lengths. The shorter lengths reduce drilling time; the longer lengths provide more strength. To install, tap into a drilled hole with a hammer and position your fixture. Then, insert a lag screw and tighten. Install flush or slightly below the surface. Pull-out strength and shear strength values are 25% of the ultimate values.

For technical drawings and 3-D models, click on a part number.

				Strength, lbs.
For Screw Size	Lg.	Min. Installation Dp.	Drill Bit Size	Pull-Out	Shear	Tested In	For Use In	Pkg. Qty.		Pkg.
Zinc Alloy
1/4"	1"	1"	1/2"	60	250	4,000 psi Concrete	Block, Brick, Concrete	10	000000000	00000
1/4"	1 1/2"	1 1/2"	1/2"	75	250	4,000 psi Concrete	Block, Brick, Concrete	10	000000000	0000
5/16"	1 1/4"	1 1/4"	1/2"	120	270	4,000 psi Concrete	Block, Brick, Concrete	10	000000000	0000
5/16"	1 3/4"	1 3/4"	1/2"	130	270	4,000 psi Concrete	Block, Brick, Concrete	10	000000000	0000
3/8"	1 3/4"	1 3/4"	5/8"	210	350	4,000 psi Concrete	Block, Brick, Concrete	10	000000000	00000
3/8"	2 1/2"	2 1/2"	5/8"	250	350	4,000 psi Concrete	Block, Brick, Concrete	10	000000000	00000
1/2"	2"	2"	3/4"	270	400	4,000 psi Concrete	Block, Brick, Concrete	5	000000000	0000
1/2"	3"	3"	3/4"	520	400	4,000 psi Concrete	Block, Brick, Concrete	5	000000000	00000
5/8"	2"	2"	7/8"	300	550	4,000 psi Concrete	Block, Brick, Concrete	4	000000000	0000
5/8"	3 1/2"	3 1/2"	7/8"	650	550	4,000 psi Concrete	Block, Brick, Concrete	4	000000000	00000
3/4"	3 1/2"	3 1/2"	1"	700	600	4,000 psi Concrete	Block, Brick, Concrete	4	000000000	00000

Anchors with Screw for Drywall, Plaster, and Wood Paneling

Rounded Head with Phillips Drive

Rounded Head with Phillips/Slotted Drive

Rounded Head with Slotted Drive

Hex Head with Slotted Drive

For technical drawings and 3-D models, click on a part number.

Screw						Strength, lbs.
Size	Lg.	Lg.	Drill Bit Size	Color	Temperature Range, °F	Pull-Out	Shear	Includes	Pkg. Qty.		Pkg.
Polyethylene Plastic
Rounded Head with Phillips Drive
No. 6	1"	3/4"	3/16"	Blue	Not Rated	Not Rated	Not Rated	Drill Bit, Screw	100	000000000	000000
No. 6	1"	7/8"	3/16"	Red	Not Rated	Not Rated	Not Rated	Drill Bit, Screw	100	000000000	00000
No. 10	1"	1"	1/4"	Blue	Not Rated	Not Rated	Not Rated	Drill Bit, Screw	100	000000000	00000
No. 14	1 1/4"	1 3/8"	5/16"	Blue	Not Rated	Not Rated	Not Rated	Drill Bit, Screw	50	000000000	00000
Rounded Head with Phillips/Slotted Drive
No. 6	1"	3/4"	3/16"	Red	Not Rated	Not Rated	Not Rated	Drill Bit, Screw	100	000000000	00000
Rounded Head with Slotted Drive
No. 10	1"	1"	1/4"	Blue	Not Rated	Not Rated	Not Rated	Drill Bit, Screw	100	000000000	00000
Hex Head with Slotted Drive
No. 10	1"	1"	1/4"	Blue	Not Rated	Not Rated	Not Rated	Drill Bit, Screw	100	000000000	00000

Anchors for Drywall, Plaster, and Wood Paneling

Also known as wall plugs, these anchors expand when installed to reinforce the hole and resist stripping. They have a ridged body with fins that prevent spinning during installation. Install flush with the surface. Then, thread a screw through your fixture and into the anchor. To determine screw length, add the anchor length to the fixture thickness and choose a screw equal to or longer than this.

For technical drawings and 3-D models, click on a part number.

					Strength, lbs.
For Screw Size	Lg.	Drill Bit Size	Color	Temperature Range, °F	Pull-Out	Shear	Pkg. Qty.		Pkg.
Polyethylene Plastic
No. 4, No. 5, No. 6, No. 7, No. 8	3/4"	3/16"	Blue	30° to 150°	Not Rated	Not Rated	100	000000000	00000
No. 6, No. 7, No. 8, No. 9, No. 10	7/8"	3/16"	Blue	30° to 150°	Not Rated	Not Rated	100	000000000	0000
No. 10, No. 12	1"	1/4"	Blue	30° to 150°	Not Rated	Not Rated	100	000000000	0000
No. 14, No. 16	1 3/8"	5/16"	Blue	30° to 150°	Not Rated	Not Rated	100	000000000	0000

Twist-Resistant Anchors for Drywall, Plaster, and Wood Paneling

Fins prevent these anchors from spinning during installation. Also known as wall plugs, they expand to reinforce a hole and resist stripping. Install anchors flush with the surface. Then, thread a screw through your fixture and into the anchor. To determine screw length, add the anchor length to the fixture thickness and choose a screw equal to or longer than this.

For technical drawings and 3-D models, click on a part number.

					Strength, lbs.
For Screw Size	Lg.	Drill Bit Size	Color	Temperature Range, °F	Pull-Out	Shear	Pkg. Qty.		Pkg.
Nylon Plastic
No. 8	1 3/8"	1/4"	Orange	-100° to 175°	Not Rated	Not Rated	50	000000000	000000
No. 10, No. 12, No. 14	2"	5/16"	Orange	-100° to 175°	Not Rated	Not Rated	50	000000000	00000
No. 14	2 3/8"	3/8"	Orange	-100° to 175°	Not Rated	Not Rated	25	000000000	00000

Quick-Drive Anchors for Drywall, Plaster, and Wood Paneling

Easy to install, tap these anchors in like a nail—no drilled hole required. Install flush with the surface. Then, thread the included screw through your fixture and into the anchor. When you thread in a screw the anchor bends to hold against the wall.

For technical drawings and 3-D models, click on a part number.

Screw						Strength, lbs.
Size	Lg.	Lg.	For Wall Thick.	Color	Temperature Range	Pull-Out	Shear	Tested In	Pkg. Qty.		Pkg.
Nylon Plastic
No. 8	1 1/4"	2"	1/2"-5/8"	Green	Not Rated	20	Not Rated	3/8" Drywall	10	00000000	00000

Female Drilling Anchors with Screw for Drywall, Plaster, and Wood Paneling

These anchors save you time and effort by drilling their own holes. Install flush with the surface. Then, thread the included screw into them. Pull-out strength and shear strength values are 25% of the ultimate values.

For technical drawings and 3-D models, click on a part number.

Screw						Strength, lbs.
Size	Lg.	Lg.	For Wall Thick.	Color	Temperature Range, °F	Pull-Out	Shear	Tested In	Pkg. Qty.		Pkg.
Zinc Alloy
No. 6	1"	1"	3/8"-5/8"	__	__	10	10	3/8" Drywall	25	00000000	000000
No. 8	1"	1 5/16"	3/8"-1"	__	__	10	15	3/8" Drywall	25	00000000	00000
No. 8	1 1/4"	1 5/8"	3/8"-3/4"	__	__	5	Not Rated	3/8" Drywall	25	0000000	00000
Nylon Plastic
No. 6	1"	1 3/8"	3/8"-5/8"	Off-White	32° to 160°	10	10	3/8" Drywall	50	0000000	00000
No. 8	1"	1 11/16"	3/8"-1"	Off-White	32° to 160°	10	15	3/8" Drywall	25	0000000	00000
No. 8	1 1/4"	1 5/8"	3/8"-3/4"	Off-White	32° to 160°	5	Not Rated	3/8" Drywall	25	0000000	00000
No. 8	1 1/2"	1 3/4"	3/8"-5/8"	Off-White	32° to 160°	10	25	3/8" Drywall	50	00000000	00000

Female Drilling Anchors for Drywall, Plaster, and Wood Paneling

These anchors save you time and effort by drilling their own holes. Install flush with the surface. Then, thread a sheet metal screw into them. To determine screw length add the anchor length to the fixture thickness and choose a screw equal to or shorter than this.

For technical drawings and 3-D models, click on a part number.

					Strength, lbs.
For Screw Size	Lg.	For Wall Thick.	Color	Temperature Range, °F	Pull-Out	Shear	Tested In	Pkg. Qty.		Pkg.
Zinc Alloy
No. 6, No. 7, No. 8	1 1/4"	3/8"-3/4"	__	__	5	Not Rated	3/8" Drywall	50	0000000	000000
No. 8	1 5/8"	3/8"-3/4"	__	__	5	Not Rated	3/8" Drywall	50	0000000	00000
Nylon Plastic
No. 6	1 3/8"	3/8"-5/8"	Off-White	30° to 170°	5	Not Rated	3/8" Drywall	100	0000000	00000
No. 6, No. 7, No. 8, No. 9, No. 10	1 5/8"	3/8"-5/8"	Off-White	30° to 170°	5	Not Rated	3/8" Drywall	50	00000000	00000
No. 8	1 5/8"	3/8"-3/4"	Off-White	30° to 170°	5	Not Rated	3/8" Drywall	50	00000000	0000

Removable-Screw Anchors for Drywall, Plaster, and Wood Paneling

A drilled hole is required for installation. Screws can be removed repeatedly without affecting the anchor. To install, tap the anchor into the material until flush. Insert a screw and turn it to expand the anchor. For high volume tasks, use the optional installation tool—it doesn't require any twisting. Pull-out strength and shear strength values are 25% of the ultimate values.

For technical drawings and 3-D models, click on a part number.

					Strength, lbs.
Thread Size	Screw Lg.	Lg.	Drill Bit Size	For Wall Thick.	Pull-Out	Shear	Tested In	Drive Style	Pkg. Qty.		Pkg.
Zinc-Plated Steel
6-32	1 3/4"	1 1/2"	5/16"	5/8"-1"	20	30lbs.	3/8" Drywall	Phillips	25	000000000	000000
10-24	2"	1 3/4"	3/8"	3/8"-5/8"	25	35lbs.	3/8" Drywall	Phillips	10	000000000	00000
10-24	2 1/2"	2 1/4"	3/8"	3/4"-1 1/8"	25	35lbs.	3/8" Drywall	Phillips	10	000000000	0000
1/4"-20	2 1/4"	2 1/8"	7/16"	3/8"-1/2"	25	40lbs.	3/8" Drywall	Phillips	10	000000000	00000
1/4"-20	2 3/4"	2 5/8"	7/16"	5/8"-1 1/8"	25	40lbs.	3/8" Drywall	Phillips	10	000000000	0000

Optional Installation Tool

000000000

Each

000000

Toggle Anchors for Sheet Metal and Wood Screws

These anchors fit a range of sheet metal and wood screw sizes since they form their own threads when installed. To install, fold the anchor in middle, insert into a hole, and tap flush. Thread a screw through your fixture and into the anchor. Extended length is the overall length of the anchor when folded in the middle.

For technical drawings and 3-D models, click on a part number.

						Strength, lbs.
For Screw Size	Extended Lg.	Drill Bit Size	For Wall Thickness	Color	Temperature Range, °F	Pull-Out	Shear	Tested In	For Use In	Pkg. Qty.		Pkg.
Polypropylene Plastic
No. 6, No. 7, No. 8, No. 9, No. 10, No. 12, No. 14	1 1/4"	5/16"	3/8"-1/2"	Off-White	-20° to 210°	30	Not Rated	1/2" Drywall	Drywall, Plaster, Wood Paneling	20	000000000	00000
No. 6, No. 7, No. 8, No. 9, No. 10, No. 12, No. 14	1 3/8"	5/16"	5/8"-3/4"	Off-White	-20° to 210°	30	Not Rated	3/4" Drywall	Drywall, Plaster, Wood Paneling	20	000000000	0000
No. 6, No. 7, No. 8, No. 9, No. 10, No. 12, No. 14	1 3/4"	5/16"	1"	Off-White	-20° to 210°	30	Not Rated	1" Drywall	Drywall, Plaster, Wood Paneling	25	000000000	00000
No. 8, No. 9, No. 10, No. 12	3/4"	5/16"	1/8"-1/4"	Off-White	-20° to 210°	30	Not Rated	1/4" Drywall	Drywall, Plaster, Wood Paneling	20	000000000	0000