Made of inherently flame-resistant Kevlar, these harnesses withstand temperatures up to 800° F. They keep you safe when you’re working at height where heat and sparks could weaken your harness. The D-ring on the back keeps you upright if you fall. When used properly with a lanyard and an anchor, these harnesses help you meet OSHA and ANSI safety standards.

Indicator stitching at impact points pops or tears during a fall, so you’ll know at a glance if the harness has been weakened by stress. When you’re not using your lanyard, clip it into one of the holders so it doesn’t drag or get caught.

These harnesses have leather-insulated metal components and meet ASTM F887 when used with an arc flash-resistant lanyard. They have a D-ring on the back that attaches to a lanyard. A complete fall-arrest system requires a lanyard, a harness, and an anchor. When used properly, the system meets applicable OSHA requirements.

With thick webbing and a water-repellent treatment, these harnesses resist elements that could shorten the lifespan of a harness, such as heat, moisture, sweat, grease, and chemicals. Attach a lanyard to the D-ring on the back, and these harnesses will keep you upright if you fall. Unfold the leg support straps after a fall to ease pressure on your legs while you wait for help. When used together with a lanyard and an anchor, these harnesses help you meet OSHA and ANSI safety standards.

Padding on the back and shoulders makes these harnesses feel lightweight and comfortable, even when worn for long periods. The leg straps are designed to stay horizontal, so they won’t ride up as you move. The hardware is aluminum for good strength without weighing you down. It also resists corrosion. Park an unused lanyard on one of the lanyard holders so that it won’t drag or get caught. Indicator stitching is designed to tear during a fall or impact, so it’s easy to tell if a harness is still safe to use.

D-rings on each hip provide a stable working position. Harnesses have a D-ring on the back that attaches to a lanyard for fall protection. A complete fall-arrest system requires a lanyard, a harness, and an anchor. When used properly, the system meets applicable OSHA requirements.

These versatile harnesses have one D-ring on the chest for use with ladder-climbing systems as well as one D-ring on each hip to provide a stable working position. Attach harness to a ladder-climbing system using a carabiner. Harnesses have a D-ring on the back that attaches to a lanyard for fall protection. A complete fall-arrest system requires a lanyard, a harness, and an anchor. When used properly, the system meets applicable OSHA requirements.

Stay straight up and down while being raised and lowered. D-rings on the shoulders of these harnesses keep you from pitching forward, so you're less likely to catch on obstacles than if you were wearing a typical fall-arrest harness. They also have a D-ring on the back for fall protection. To keep the harness feeling comfortable and lightweight when worn for long periods, there’s padding on the back and shoulders. As you bend, sit, and move, the leg straps keep pressure off your inner thighs and won’t ride up. The hardware is aluminum for good strength without weighing you down. When used with a lanyard and an anchor, these harnesses help you meet OSHA and ANSI safety standards.

Park an unused lanyard on one of the lanyard holders to prevent it from dragging or getting caught. The harnesses have an RFID tag, which is useful for taking inventory and tracking inspections. To make it easy to know when these harnesses should no longer be used, indicator stitching tears or pops during a fall.

Squeeze-release thigh buckles connect and disconnect more quickly than belt thigh buckles. They’re also more convenient because you don’t have to adjust the size each time you put them on.

Belt thigh buckles reduce the risk of loosening over time. They lock into a specific hole.

Stay comfortable when wearing your harness for long periods of time. This padding keeps your harness from digging in and causing chafing. It’s flexible yet durable. Straps with snaps or hook and loop secure it to your harness.

Padding with arc-flash protection is tested to meet ASTM F887 standards for jobs where there is a risk of exposure to electric arcs and flames. It's made of Nomex, so it won't melt or drip if exposed to flash fires.

Stand out while you’re working up high. Rated ANSI/ISEA 107 Class 2, these vests have bright colors and reflective stripes to keep you visible from a distance. Wear them over your fall-arrest harness so people on the ground can check that you’re working safely. Since they have slits on the back and sides for access to your D-rings, the colors and stripes won’t be obscured by your harness straps. Made from polyester mesh, they’re durable and lightweight—they stay bright through many wears and won’t block the breeze. They also protect your harness from abrasion.

To keep tools close, clip them to a tethering point on the front or back of these vests. All tethering points meet ANSI/ISEA 121 for preventing objects from falling and causing injury or damage.

Stay straight up and down while being raised and lowered through narrow spaces. These lanyards clip into your harness’s shoulder D-rings to keep you from pitching forward. Grab onto the bar so your arms won't get caught on anything as you pass through manholes and other openings.

Not for use as fall-arrest equipment alone. Add them to a complete fall-arrest system, which includes a lanyard, harness, and anchor.