McMaster-Carr logo
    Filter by
    System of Measurement
    Plug Anchor Type
    Fastener Head Type
    Industrial Info Compare
    Drive Style
    Industrial Info Compare
    Drive Anchor Type
    Screw Length
    DFARS Specialty Metals
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    75 Products

    For Use In

    Performance

    Light Duty Anchors for Block and Brick

    These anchors grip the sides of your hole to resist twisting and pullout in block and brick. They’re an economical choice for mounting lightweight switches, security cameras, and clocks. All are the easiest anchors to install in block and brick but have the lowest strength.
    To install, drill a hole slightly deeper than the anchor is long. Next, insert the anchor until it's flush with the surface. Then, thread a tapping screw through your component into the anchor and tighten. Remove your component by unfastening the screw, but the anchor itself cannot be removed.
    Anchors
    Alligator—Expand and fuse to hole walls for a secure hold. Projections on these anchors add gripping force to prevent twisting. Removing and reinstalling your screw will not lessen the strength.
    Flanged Alligator—Best for installing in walls with hollow cavities, the flange keeps these anchors from being pushed through your hole. The anchors split in half inside the cavity for a secure hold. Projections on the anchors add gripping force to prevent twisting. Removing and reinstalling your screw will not lessen the strength.
    Finned—For a secure hold, two large fins grip holes in solid surfaces or expand in the cavity of hollow surfaces. The fins also add tension before tightening the screw, so these anchors won't fall out of overhead holes. Removing and reinstalling the screw will weaken the strength.
    Ultimate
    Strength
    For Screw Size
    Lg.
    Drill Bit
    Size
    Material
    Pull-Out,
    lbf
    Shear
    Conditions
    Tested In
    Pkg.
    Qty.
    Pkg.
    Alligator
    Image of Product. Front orientation. Anchors. Light Duty Anchors for Block and Brick, Alligator.
    No. 4, No. 5, No. 6, No. 7, No. 8, No. 9
    		15/16"3/16"
    		Polypropylene480Not Rated3,500 psi Concrete5000000000000000
    No. 6, No. 7, No. 8, No. 9, No. 10, No. 11, No. 12
    		1 1/8"1/4"
    		Polypropylene640Not Rated3,500 psi Concrete5000000000000000
    No. 8, No. 9, No. 10, No. 11, No. 12, No. 14
    		1 9/16"5/16"
    		Polypropylene1,000Not Rated3,500 psi Concrete250000000000000
     
    Flanged Alligator
    Image of Product. Front orientation. Anchors. Light Duty Anchors for Block and Brick, Flanged Alligator.
    No. 4, No. 5, No. 6, No. 7, No. 8, No. 9
    		1"3/16"
    		Polypropylene480Not Rated3,500 psi Concrete500000000000000
    No. 6, No. 7, No. 8, No. 9, No. 10, No. 11, No. 12
    		1 3/16"1/4"
    		Polypropylene640Not Rated3,500 psi Concrete5000000000000000
    No. 8, No. 9, No. 10, No. 11, No. 12, No. 14
    		1 5/8"5/16"
    		Polypropylene1,000Not Rated3,500 psi Concrete250000000000000
     
    Finned
    Image of Product. Front orientation. Anchors. Light Duty Anchors for Block and Brick, Finned.
    No. 4, No. 5, No. 6
    		1"3/16"
    		Nylon240Not RatedSolid Brick1000000000000000
    No. 8, No. 9, No. 10
    		1 3/16"7/32"
    		Nylon400Not RatedSolid Brick10000000000000000
    No. 10, No. 11, No. 12
    		1 1/2"5/16"
    		Nylon680Not RatedSolid Brick10000000000000000
    1/4", 5/16"
    		2"3/8"
    		Nylon840Not RatedSolid Brick5000000000000000
     
    Anchors with Screw
    Image of Product. Front orientation. Anchors. Light Duty Anchors for Block and Brick, Anchors with Screw, Flanged Alligator.

    Flanged

    Alligator

    Flanged Alligator—Best for installing in walls with hollow cavities, the flange keeps these anchors from being pushed through your hole. The anchors split in half inside the cavity for a secure hold. Projections on the anchors add gripping force to prevent twisting. Removing and reinstalling your screw will not lessen the strength.
    Screw
    Ultimate
    Strength
    Size
    Lg.
    Lg.
    Drill Bit
    Size
    Fastener
    Head Type
    Drive Style
    Material
    Pull-Out,
    lbf
    Shear
    Conditions
    Tested In
    Pkg.
    Qty.
    Pkg.
    Flanged Alligator
    No. 10
    		1 1/2"1 1/8"1/4"
    		Rounded
    		Phillips/Slotted
    		Polypropylene640Not Rated3,500 psi Concrete50000000000000000
     

    High-Strength Anchors for Block and Brick

    Image of Product. Front orientation. Anchors. High-Strength Anchors for Block and Brick.
    Offering up to twice the strength of double expansion anchors, these US-made anchors expand in four directions for a superior grip in floors, walls, and ceilings. You can even use them to mount heavy machinery with constant motion, such as conveyors and vibrating feeders, because their ridges lock them in place to resist vibration. All of these anchors expand along their full length to distribute the gripping force, so they won’t crack soft materials. You can use them in concrete near edges, corners, or other weak points as an alternative to drop-in anchors.
    To install, tap the anchor into a drilled hole. Insert a screw or threaded rod through your machinery and into the anchor. Then, tighten to expand the anchor. All create a permanent female-threaded connection that lets you remove and reinstall a screw or threaded rod.
    Ultimate
    Strength, lbf
    Thread
    Size
    Lg.
    Drill Bit
    Size
    Min. Installation
    Dp.
    Material
    Pull-Out
    Shear
    Conditions
    Tested In
    Pkg.
    Qty.
    Pkg.
    1/4"-20
    		1 1/4"1/2"
    		1 1/4"Zinc2,3202,0803,000 psi Concrete10000000000000000
    5/16"-18
    		1 1/2"9/16"
    		1 1/2"Zinc2,6003,2803,000 psi Concrete1000000000000000
    3/8"-16
    		1 3/4"11/16"
    		1 3/4"Zinc3,6003,8403,000 psi Concrete1000000000000000
    1/2"-13
    		2 1/4"7/8"
    		2 1/4"Zinc4,8008,0003,000 psi Concrete400000000000000
    5/8"-11
    		2 5/8"1 1/8"
    		2 5/8"Zinc5,60014,0003,000 psi Concrete10000000000000
    3/4"-10
    		3 1/8"1 1/4"
    		3 1/8"Zinc9,60015,2003,000 psi Concrete100000000000000

    Removable Taper-Bolt Anchors for Concrete

    Image of ProductInUse. Front orientation. Anchors. Removable Taper-Bolt Anchors for Concrete.
    Image of Product. Front orientation. Contains Annotated. Anchors. Removable Taper-Bolt Anchors for Concrete.
    Remove the bolt to adjust, move, or replace components. Manufactured in the U.S. with Grade 5 steel, these anchors have over twice the shear strength of our wedge anchors, making them strong enough to secure highway barriers and train tracks. When you tighten them, the tapered bolt expands the nut, spreading the gripping force along its entire length. This creates the higher strength than wedge anchors, where the grip is focused at the wedge. These anchors are more forgiving of variations in hole precision than wedge anchors and require more torque to install. The increased torque puts stress on your base material, so don't use them near edges, corners, or in cracked surfaces.
    To install, thread the nut onto the tapered bolt. Drive the anchor through your component into a drilled hole. Then, turn the bolt to expand the nut for a tight hold. You can repeatedly use the bolt in the same hole. To use the bolt in a new hole, a replacement expander nut (sold separately) is required.
    Zinc-Plated Steel—The most common choice for areas with occasional exposure to moisture.
    Anchors
    Replacement
    Expander Nuts
    Ultimate
    Strength, lbf
    Each
    Package
    Lg.
    Thread
    Lg.
    Head
    Wd.
    Min. Installation
    Dp.
    Drill Bit
    Size
    Pull-Out
    Shear
    Conditions
    Tested In
    Installation
    Torque, ft·lbf
    Each
    Pkg.
    Qty.
    Pkg.
    Pkg.
    Qty.
    Pkg.
    Zinc-Plated Steel
     
    3/8" Diameter
    2 1/4"3/4"9/16"1 7/8"3/8"
    		4,0006,8003,000 psi Concrete400000000000000050000000000000000010000000000000000
    3"3/4"9/16"1 7/8"3/8"
    		4,0006,8003,000 psi Concrete40000000000000025000000000000001000000000000000
    4"3/4"9/16"1 7/8"3/8"
    		4,0006,8003,000 psi Concrete40000000000000025000000000000001000000000000000
     
    1/2" Diameter
    2 7/8"1 1/8"3/4"2 3/8"1/2"
    		8,00012,0003,000 psi Concrete90000000000000025000000000000001000000000000000
    4"1 1/8"3/4"2 3/8"1/2"
    		8,00012,0003,000 psi Concrete900000000000000250000000000000001000000000000000
    5"1 1/8"3/4"2 3/8"1/2"
    		8,00012,0003,000 psi Concrete900000000000000200000000000000001000000000000000
     
    5/8" Diameter
    3 1/2"1 3/8"15/16"2 7/8"5/8"
    		9,60016,8003,000 psi Concrete1250000000000000200000000000000001000000000000000
    4 1/2"1 3/8"15/16"2 7/8"5/8"
    		9,60016,8003,000 psi Concrete1250000000000000010000000000000001000000000000000
     
    3/4" Diameter
    4 1/8"1 1/2"1 1/8"3 3/8"3/4"
    		11,60027,2003,000 psi Concrete2500000000000000020000000000000000500000000000000
    5 1/2"1 1/2"1 1/8"3 3/8"3/4"
    		11,60027,2003,000 psi Concrete2500000000000000010000000000000000500000000000000
    8"1 1/2"1 1/8"3 3/8"3/4"
    		11,60027,2003,000 psi Concrete2500000000000000010000000000000000500000000000000
     
    1" Diameter
    5 5/8"2 1/8"1 1/2"4 5/8"1"
    		28,00036,0003,000 psi Concrete5500000000000000010000000000000000400000000000000
    7 1/4"2 1/8"1 1/2"4 5/8"1"
    		28,00036,0003,000 psi Concrete55000000000000000————0400000000000000
     

    Vibration-Resistant Drive Anchors for Block and Brick

    Best for securing heavy machinery with constant motion, such as vibrating feeders and conveyors, to walls and floors, these anchors won’t shake loose. As you hammer in the pin, the anchor body expands while the ridges bite into your hole’s walls for a superior grip. These anchors require more force to install than sleeve anchors, so the block and brick you are installing them in should not be worn or cracked.
    To install, position the nut and insert the anchor through your machinery into a drilled hole. Then, hammer the pin until it's flush with the top of the bolt, ensuring the anchor is fully set.
    Pin Drive Anchors with Hex Nut
    Image of Product. Front orientation. Contains Annotated. Anchors. Vibration-Resistant Drive Anchors for Block and Brick, Hex Nut, Pin Drive Anchor.
    You can remove your machinery by unfastening the nut, but the anchor itself cannot be removed without prying out the pin.
    Zinc-Plated Steel—The most common choice for areas with occasional exposure to moisture.
    Thread
    Ultimate
    Strength, lbf
    Lg.
    Size
    Lg.
    Min. Installation
    Dp.
    Drill Bit
    Size
    Pull-Out
    Shear
    Conditions
    Tested In
    Pkg.
    Qty.
    Pkg.
    Zinc-Plated Steel
     
    1/4" Diameter
    1 3/4"1/4"-20
    		5/8"1 1/8"1/4"
    		1,4801,0004,000 psi Concrete400000000000000
    2 3/8"1/4"-20
    		3/4"1 1/8"1/4"
    		1,4801,0004,000 psi Concrete40000000000000
     
    5/16" Diameter
    2"5/16"-18
    		3/4"1 1/2"5/16"
    		3,0801,2804,000 psi Concrete40000000000000
    2 3/4"5/16"-18
    		1"1 1/2"5/16"
    		3,0801,2804,000 psi Concrete40000000000000
     
    3/8" Diameter
    2 3/8"3/8"-16
    		1"1 7/8"3/8"
    		3,2803,4804,000 psi Concrete400000000000000
    3 1/2"3/8"-16
    		1 1/8"1 7/8"3/8"
    		3,2803,4804,000 psi Concrete400000000000000
    4 3/4"3/8"-16
    		1 3/8"1 7/8"3/8"
    		3,2803,4804,000 psi Concrete400000000000000
     
    1/2" Diameter
    2 3/4"1/2"-13
    		1"2 1/2"1/2"
    		5,6004,8004,000 psi Concrete400000000000000
    3 1/2"1/2"-13
    		1 1/8"2 1/2"1/2"
    		5,6004,8004,000 psi Concrete400000000000000
    4 3/4"1/2"-13
    		1 3/8"2 1/2"1/2"
    		5,6004,8004,000 psi Concrete400000000000000
    6"1/2"-13
    		1 1/2"2 1/2"1/2"
    		5,6004,8004,000 psi Concrete10000000000000
     
    5/8" Diameter
    4"5/8"-11
    		1 1/2"2 3/4"5/8"
    		7,6009,2004,000 psi Concrete10000000000000
    6"5/8"-11
    		1 1/2"2 3/4"5/8"
    		7,6009,2004,000 psi Concrete100000000000000
     
    Pin Drive Anchors with Tamper-Resistant Nut
    Image of Product. Front orientation. Contains Annotated, Inset. Anchors. Vibration-Resistant Drive Anchors for Block and Brick, Pin Drive Anchors with Tamper-Resistant Nut.
    A tamper-resistant nut prevents the unwanted removal of machinery. Turn the nut round side up for a domed look or flat side up to create a flush finish in countersunk holes. Once set, the nut can’t be removed. The only way to remove the machinery is to pry out the pin and remove the entire anchor.
    Steel—Best for dry environments since moisture will cause these anchors to rust.
    Ultimate
    Strength, lbf
    Lg.
    Thread
    Lg.
    Min. Installation
    Dp.
    Drill Bit
    Size
    Pull-Out
    Shear
    Conditions
    Tested In
    Pkg.
    Qty.
    Pkg.
    Steel
     
    1/4" Diameter
    1 3/4"5/8"1"1/4"
    		1,2801,6004,000 psi Concrete10000000000000000
    2 3/8"3/4"1"1/4"
    		1,2801,6004,000 psi Concrete400000000000000
     
    3/8" Diameter
    2 3/8"1"1 1/2"3/8"
    		3,4003,4004,000 psi Concrete400000000000000
    3 1/2"1 1/8"1 1/2"3/8"
    		3,4003,4004,000 psi Concrete500000000000000
     

    Light Duty Drive Rivet Anchors for Block and Brick

    A step up from a nail, the rivet head creates a secure connection with a finished look for mounting lightweight signs, screens, and panels. Easier to install than other types of anchors for block and brick, the anchors expand as you hammer in the pin or screw. Since the gripping force is distributed along the entire length of the anchor, it won’t crack soft materials.
    To install, insert the anchor through your component and into a drilled hole. Then, hammer the pin or screw until it's flush with the anchor's head, which expands the anchor body.
    Pin Drive Anchors
    Image of Product. Front orientation. Contains Annotated. Anchors. Light Duty Drive Rivet Anchors for Block and Brick, Pin Drive Anchors.
    To remove, pry out the pin and then pull out the anchor.
    Head
    Ultimate
    Strength
    Lg.
    Dia.
    Ht.
    Min. Installation
    Dp.
    Drill Bit
    Size
    Pin Material
    Material
    Pull-Out
    Shear
    Pkg.
    Qty.
    Pkg.
    3/16" Diameter
    3/4"9/16"1/8"3/4"3/16"
    		Zinc-Plated SteelNylonNot RatedNot Rated100000000000000000
    1"9/16"1/8"1"3/16"
    		Zinc-Plated SteelNylonNot RatedNot Rated10000000000000000
     
    1/4" Diameter
    3/4"9/16"7/64"3/4"1/4"
    		Acetal
    		NylonNot RatedNot Rated10000000000000000
    3/4"9/16"1/8"3/4"1/4"
    		Zinc-Plated SteelNylonNot RatedNot Rated10000000000000000
    1"9/16"7/64"1"1/4"
    		Acetal
    		NylonNot RatedNot Rated10000000000000000
    1"9/16"1/8"1"1/4"
    		Zinc-Plated SteelNylonNot RatedNot Rated10000000000000000
    1 1/2"9/16"7/64"1 1/2"1/4"
    		Acetal
    		NylonNot RatedNot Rated10000000000000000
    1 1/2"9/16"1/8"1 1/2"1/4"
    		Zinc-Plated SteelNylonNot RatedNot Rated10000000000000000
     
    Easy-Release Screw Drive Anchors
    Image of Product. Front orientation. Contains Annotated. Anchors. Light Duty Drive Rivet Anchors for Block and Brick, Easy-Release Screw Drive Anchors.
    To remove, unthread the screw to release the anchor's grip and then pull out the anchor.
    Head
    Ultimate
    Strength
    Lg.
    Dia.
    Ht.
    Min. Installation
    Dp.
    Drill Bit
    Size
    Screw Material
    Material
    Pull-Out
    Shear
    Pkg.
    Qty.
    Pkg.
    3/16" Diameter
    1"7/16"1/8"1"3/16"
    		Zinc-Plated SteelNylonNot RatedNot Rated100000000000000000
     
    1/4" Diameter
    1"7/16"1/8"1"1/4"
    		Zinc-Plated SteelNylonNot RatedNot Rated10000000000000000
    1 1/2"7/16"1/8"1 1/2"1/4"
    		Zinc-Plated SteelNylonNot RatedNot Rated10000000000000000
     
    back to top