About Lifting with Hoist Rings
More
About Threaded Studs and Rods
More
High-Strength Toggle Anchors
These high-strength toggle anchors provide an extremely strong hold and stay in position when a bolt is removed. To install, push the toggle through a drilled hole and pull the anchor back toward you until the toggle rests flush against the wall. Then, slide the cap up to the wall and snap off the straps. Next, position your fixture, insert a screw and tighten. For use with machine screws; minimum screw length is the wall and fixture thicknesses plus 1/2". Pull-out strength and shear strength values are 25% of the ultimate values.
Zinc-plated steel toggle anchors resist corrosion in wet environments.
For technical drawings and 3-D models, click on a part number.
Strength, lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Thread Size | Thread Pitch, mm | Usable Lg. Range | Wing Span | Drill Bit Size | Material | Color | Pull-Out | Shear | Tested In | For Use In | Pkg. Qty. | Pkg. | |
Zinc-Plated Steel Toggle | |||||||||||||
M6 | 1 | 10mm-92mm | 51mm | 13 mm | Polystyrene Plastic | White | 250 | 250 | Hollow Concrete Block | Drywall, Hollow Block, Plaster, Wood Paneling | 5 | 000000000 | 00000 |
Metric Stainless Steel Wood Screw Threaded Studs
316 stainless steel studs have excellent resistance to chemicals and salt water and may be mildly magnetic. Also known as hanger bolts, use them to hang, mount, and fasten parts to wood structures. Install with a stud driver or create wrench flats by threading two nuts onto the stud and jamming them together.
For technical drawings and 3-D models, click on a part number.
(A) | (B) | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Screw Size | Thread Lg., mm | Thread Size | Thread Pitch, mm | Thread Lg., mm | Lg., mm | Tensile Strength, psi | Hardness | Pkg. Qty. | Pkg. | |
316 Stainless Steel | ||||||||||
M6 | 40 | M6 | 1 | 30 | 70 | Not Rated | Not Rated | 1 | 000000000 | 00000 |
Beam Clamps for Threaded Rod
Attach these clamps to the flange of a beam, then hang a threaded rod from the threaded hole.
Styles D, E, and H have a threaded hole on the back for supporting a hanger or routing ring.
Zinc-plated iron clamps have mild corrosion resistance.
For technical drawings and 3-D models, click on a part number.
Style | For Beam Shape | For Thread Size | For Thread Pitch, mm | For Max. Beam Thick. | Capacity, lbs. | Mount Type | Throat Dp. | Lg. | Wd. | Ht. | Threaded Rod Included | Each | |
Zinc-Plated Iron | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
E | Flat, Tapered | M6 | 1 | 1/2" | 275 | Clamp On | 1/2" | 1 1/2" | 1 1/8" | 1 1/2" | No | 000000 | 000000 |
Hoist Rings—For Lifting
Designed for angular lifting, hoist rings resist stresses that would bend or break an eyebolt. They have a lifting ring that pivots 180° front to back and a base that swivels 360° to compensate for pitch, roll, and sway when lifting heavy or unbalanced loads. Install the base of the hoist ring flush to the mounting surface and tighten to the recommended torque that is stamped on the ring. Torque wrenches are sold separately.
Black-oxide steel hoist rings have mild corrosion resistance.
Hoist rings that are CE marked meet European safety standards.
Note: Capacities listed are for vertical lifting only. As the lift angle changes from vertical, the amount of weight the hoist ring can lift is significantly reduced. For example, when lifting a 1,000 lb. load at a 45° angle, you must choose a hoist ring with a capacity of at least 1,400 lbs. Do not use at an angle less than 30°.
Warning: Never use to lift people or items over people.
For technical drawings and 3-D models, click on a part number.
Thread Size | Thread Pitch, mm | Thread Lg., mm | Inside Wd., mm | Overall Ht., mm | Vertical Capacity, lbs. | Movement | Specifications Met | Each | |
Forged Black-Oxide Steel | |||||||||
---|---|---|---|---|---|---|---|---|---|
M6 | 1 | 13 | 24 | 82 | 550 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 00000000 | 0000000 |
Extension Spring Stud Anchors
A black-oxide finish provides these steel anchors with mild corrosion resistance. Attach an extension spring to a stud and then thread the stud into your part for a secure connection.
For technical drawings and 3-D models, click on a part number.
Thread | ||||||||
---|---|---|---|---|---|---|---|---|
Size | Pitch, mm | Min. Lg., mm | Lg., mm | Dia., mm | Hole Dia., mm | Material | Each | |
M6 | 1 | 22 | 32 | 6 | 4 | Black-Oxide Steel | 0000000 | 00000 |
Corrosion-Resistant Extension Spring Stud Anchors
These stainless steel anchor studs offer excellent corrosion resistance. Attach an extension spring to a stud and then thread the stud into your part for a secure connection.
For technical drawings and 3-D models, click on a part number.
Thread | |||||||||
---|---|---|---|---|---|---|---|---|---|
Size | Pitch, mm | Min. Lg., mm | Lg., mm | Dia., mm | Hole Dia., mm | Material | Anchor Type | Each | |
M6 | 1 | 22 | 32 | 6 | 4 | 18-8 Stainless Steel | Stud | 000000000 | 000000 |
Corrosion-Resistant Swiveling Extension Spring Stud Anchors
These stainless steel anchor studs offer excellent corrosion resistance. The head swivels 360° so the spring stays straight and properly coiled. Attach an extension spring to a stud and then thread the stud into your part for a secure connection. To make tightening easier, anchors have a hex socket on the bottom and wrench flats at the top of the threads.
For technical drawings and 3-D models, click on a part number.
Thread | |||||||||
---|---|---|---|---|---|---|---|---|---|
Size | Pitch, mm | Min. Lg., mm | Lg., mm | Dia., mm | Hole Dia., mm | Hex Size, mm | Material | Each | |
M6 | 1 | 22 | 32 | 6 | 4 | 2 | 18-8 Stainless Steel | 000000000 | 000000 |
Swiveling Extension Spring Stud Anchors
A black-oxide finish provides these steel anchors with mild corrosion resistance. The head swivels 360° so the spring stays straight and properly coiled. Attach an extension spring to a stud and then thread the stud into your part for a secure connection. To make tightening easier, anchors have a hex socket on the bottom and wrench flats at the top of the threads.
For technical drawings and 3-D models, click on a part number.
Thread | |||||||||
---|---|---|---|---|---|---|---|---|---|
Size | Pitch, mm | Min. Lg., mm | Lg., mm | Dia., mm | Hole Dia., mm | Hex Size, mm | Material | Each | |
M6 | 1 | 22 | 32 | 6 | 4 | 2 | Black-Oxide Steel | 000000000 | 000000 |