A ball inside a level tube indicates the side-to-side tilt angle.

Measure 40° front-to-back tilt in addition to side-to-side tilt. A ball inside a level tube indicates the side-to-side tilt angle.

At 2 1/4" square and 1" wide, this angle indicator easily fits into your pocket. Choose an alternate zero point with the push of a button.

At 2 1/4" square and 1" wide, this angle indicator easily fits into your pocket. It also shows level on the display and has a hold button that freezes the reading. Choose an alternate zero point with the push of a button. The display pops up for easy viewing. A V-groove provides stability on curved surfaces.

These angle indicators come with a calibration certificate that's traceable to NIST and includes the test measurements that confirm accuracy. The display shows highly accurate angle, level, and tilt measurements. They come set at true 0°, but you can choose an alternate zero point with the push of a button. Another button will freeze the reading on the display. Indicators have machined leveling surfaces, a V-groove for stability on curved surfaces, and two 6-32 threaded holes for mounting.

Angle indicator with an RS-232 computer connection can be used for ASCII output.

These angle indicators display highly accurate angle, level, and tilt measurements. They come set at true 0°, but you can choose an alternate zero point with the push of a button. Another button will freeze the reading on the display. Indicators have machined leveling surfaces, a V-groove for stability on curved surfaces, and two 6-32 threaded holes for mounting.

Angle indicator with an RS-232 computer connection can be used for ASCII output.

Align guide rails or lay pipe at specific angles from a flat surface. The laser light is red and is best viewed indoors. The display shows the precise angle of the beam and rotates for overhead measurements. The audible level indicator tells you when the tool is level and plumb.

The LCD on this digital angle indicator shows angle in degrees and percent of slope. The display inverts when you turn it upside down.

The electronic sensor and the display are connected by a 4-ft. cable so you can measure angles from a distance. They can be mounted up to 200 feet apart by replacing the included cable with a longer cable length (sold separately).

A dot laser extends the working distance 200 feet beyond the tool length. This tool has two digital displays that invert when turned upside down; one shows the base angle and the other shows the moveable arm angle. It also has a lock to hold the arm in position, a hold button that freezes the display, auto shutoff, and 1/4"-20 threads for connecting to a tripod.

These tools have one digital display and a lock to hold the arms in position.

This tool has front and back digital displays, as well as horizontal and vertical vials. Internal memory stores angle measurements, and a calculator determines the exact angles of cuts. Displays will shut off automatically when not in use.

Lay out machine tables and work stations at precise right angles. This laser generates two red lines that form a 90° angle. The laser lines are best viewed indoors.

These gauges have 18 leaves that swing out when you want to quickly check an angle. They're more convenient than a protractor when identifying 45° and smaller angles. The 14 1/2° angle leaf measures half the Acme standard 29° angle.

These levels have a plastic housing. The LCD shows angle in degrees and percent of slope.

The LCD shows angle in degrees, percent of slope, and pitch (in./ft.). Levels have a sturdy box-style housing.

Align rotary shafts with the help of a mobile app. These sensor kits are more accurate than straightedges and easier to use than dial indicators. Properly aligning shafts reduces vibration and protects couplings, bearings, and other parts from wear and damage.

Use the included chain clamps to mount these sensors above your coupling, where they detect the degree of misalignment between the shafts. The app shows live animations to give step-by-step instructions for repositioning your equipment. Once the shafts are aligned, the app saves a report documenting the process.

Good for extended use in industrial environments, these sensors last up to 18 hours between charges and are IP54 rated for protection from dust.