Temporarily mount these indicators to a metal surface. They have four quadrants that each read any angle from 0° to 90°.
Also known as angle finders, use these to gauge the angle of any surface.
Level horizontally and vertically at the same time. The dial is divided into four quadrants for reading any angle in a 360° range.
These angle indicators have a horizontal leveling vial and can measure angles between 0° and 180°.
A ball inside a level tube indicates the side-to-side tilt angle.
Measure 40° front-to-back tilt in addition to side-to-side tilt.
These angle indicators display highly accurate angle, level, and tilt measurements.
These angle indicators come with a calibration certificate that's traceable to NIST and includes the test measurements that confirm accuracy.
The LCD on these digital angle indicators shows angle in degrees and percent of slope.
Align guide rails or lay pipe at specific angles from a flat surface.
At 2 1/4" square and 1" wide, this angle indicator easily fits into your pocket.
These angle indicators also show level on the display.
The electronic sensor and the display are connected by a 4-ft. cable so you can measure angles from a distance. They can be mounted up to 200 feet apart by replacing the included cable with a longer cable length.
Set bevels and measure angles. Also known as bevel protractors, these have an adjustable arm.
Also known as bevel protractors, set bevels and measure angles with the adjustable arm.
Measure angles with these round protractors.
Use these protractors to measure angles and dimensions.
Measure angles and dimensions with one tool.
Mount on any flat surface.
Precisely measure angles on molds and jigs.
Take precise measurements with this protractor.
Small enough to fit in your pocket, this versatile tool measures angles and dimensions and has a center finder.
Handle big jobs such as sheet metal fabricating and pipe bending with these long-arm protractors.
These magnetic tools have one digital display and a lock to hold the arms in position.
These tools have front and back digital displays, as well as horizontal and vertical vials.
A dot laser extends the working distance 200 feet beyond the tool length. This tool has two digital displays that invert when turned upside down; one shows the base angle and the other shows the moveable arm angle.
Attach to High-Accuracy Combination Square Blades with the included lockbolts.
Use these blades with Starrett High-Accuracy Combination Square Heads. They meet Fed. Spec. GGG-R-791H, which establishes uniform standards for accuracy, graduations, and size.
Use these squares in place of your try square, miter square, depth gauge, height gauge, center-point finder, and level.
Blades are for use with High-Accuracy Combination Square Heads.
Replace your try square, miter square, depth gauge, height gauge, center-point finder, and level. The blade on these squares meets Fed. Spec. GGG-R-791H, which establishes uniform standards for accuracy, graduations, and size.
Attach to Starrett High-Accuracy Combination Square Blades with the included lockbolts.
Replace your try square, miter square, depth gauge, marking gauge, 90° level, ruler, and scriber with one tool.
A titanium coating protects the blade against scratches and wear.
Pipe fitting sizes and welding charts are shown on this square in wear-resistant etched markings.
Also known as carpenters’ and framing squares, these have graduations on both blades for horizontal and vertical measurements.
Ensure reliable, repeatable angles.
These squares meet Fed. Spec. GGG-S-656-E, which establishes uniform standards for square accuracy to ensure reliable, repeatable angles.
Lay out machine tables and work stations at precise right angles. This laser generates two red lines that form a 90° angle.
Also known as try squares, these are square inside and out for checking and marking angles.
Measure and mark material exactly where you need to with a sliding blade.
Also known as rafter squares, these have a 0° to 90° scale for measuring angles.
These gauges have 18 leaves that swing out when you want to quickly check an angle. They're more convenient than a protractor when identifying 45° and smaller angles.
These levels have a plastic housing.
These levels have a sturdy aluminum housing.
Align rotary shafts with the help of a mobile app.
Unfold and lock the corners to form a triangle for marking angles.
Duplicate or transfer any angle.
Find the center of square and round materials, such as structural framing and pipe, and determine setup angles on milling machines and grinders.
Draw and cut straight lines in drafting, graphics, and construction applications.
Transfer multiple angles, draw parallel lines, or create a template to make repeated patterns and measurements.
A protractor and triangle in one, use these tools to quickly set any angle from 0° to 90°.