An anodized coating forms a bond with the aluminum surface to improve wear and corrosion resistance.

The most widely used aluminum, 6061 is fabricated into everything from pipe fittings and containers to automotive and aerospace parts. It is strong and corrosion resistant, plus it's easy to machine and weld.

The most widely used aluminum, 6061 is fabricated into everything from pipe fittings and containers to automotive and aerospace parts. It is strong and corrosion resistant, plus it's easy to machine and weld.

More corrosion resistant and easier to form than multipurpose 6061 aluminum, 6063 is primarily used for exterior railings, decorative trim, and door frames.

More corrosion resistant and easier to form than multipurpose 6061 aluminum, 6063 is primarily used for exterior railings, decorative trim, and door frames.

More corrosion resistant and easier to form than multipurpose 6061 aluminum, 6063 is primarily used for exterior railings, decorative trim, and door frames.

Easier to bend and shape than 6061 aluminum, this aluminum is good for framing, cross sections, and structures in construction and marine industries.

While 2024 aluminum was initially designed for structural components in aircraft, it's now widely used when a high strength-to-weight ratio is needed. It offers similar performance to 7075 aluminum, but it’s not as strong.

Originally developed for aircraft frames, uses for 7075 aluminum now include a wide range of high-stress parts. It is often used as a replacement for 2024 aluminum because it’s stronger and provides similar performance in all other aspects.

These 90° angles are zinc galvanized for good corrosion resistance.

Also known as mild steel, low-carbon steel is easy to machine, form, and weld. It's widely fabricated into parts that don’t require high strength.

Made of rigid low-carbon steel, these I-beams are often used in construction, framing, lifting, and hoisting applications.

The addition of molybdenum gives 316 stainless steel excellent corrosion resistance. Use it in a variety of marine and chemical-processing applications.

Often called architectural bronze, 385 brass is easy to machine and has excellent formability when heated. It is typically used for handrails, ornamental trim, and hardware, such as hinges and lock bodies.

Strengthen corners of cases and crates.

Clamp these brackets to panel edges to quickly assemble crates.

Machine holes and slots or weld in place.

Machine holes and slots or weld in place.

Because PVC resists many acids and alkalies, it’s widely used for tanks and in chemical-processing applications. Also known as PVC Type 1.

In addition to a low-friction surface that prevents sticking and binding, this tough material is impact and wear resistant to handle the scuffs, scrapes, and strikes that other plastics can’t.

Because this polypropylene resists swelling when exposed to water, it’s often fabricated into containers and parts for laboratory equipment.

Known for its naturally slippery surface, PTFE surpasses most plastics when it comes to chemical resistance and performance in extreme temperatures.

At only half the weight of glass, polycarbonate maintains excellent impact resistance across a wide temperature range. It's commonly known as Lexan, Hyzod, Tuffak, and Makrolon.

Because PVC resists acids and alkalies, it is often used in tanks and chemical-processing applications where visibility is essential.

Half the weight of steel, this aluminum framing resists corrosion in wet environments.

Connect T-slotted rails and reinforce joints for structural stability.

Attach sensors, tubes, and other components to T-slotted framing rails and structures.

A tab on the end of these shelf brackets fits inside the strut channel for extra stability.

Build test fixtures, prototypes, and other small structures with this miniature version of T-slotted framing and fittings.

Half the weight of steel, this aluminum framing resists corrosion in wet environments.

Also known as angle finders, use these to gauge the angle of any surface.

These angle indicators have a horizontal leveling vial and can measure angles between 0° and 180°.

Measure 40° front-to-back tilt in addition to side-to-side tilt.

These angle indicators also show level on the display.

These angle indicators come with a calibration certificate that's traceable to NIST and includes the test measurements that confirm accuracy.

Align guide rails or lay pipe at specific angles from a flat surface.

Measure angles with these round protractors.

Mount on any flat surface.

Take precise measurements with this protractor.

Measure angles and dimensions with one tool.

Small enough to fit in your pocket, this versatile tool measures angles and dimensions and has a center finder.

These tools have front and back digital displays, as well as horizontal and vertical vials.

Ensure reliable, repeatable angles.

Also known as carpenters’ and framing squares, these have graduations on both blades for horizontal and vertical measurements.

These squares meet Fed. Spec. GGG-S-656-E, which establishes uniform standards for square accuracy to ensure reliable, repeatable angles.

Attach to Starrett High-Accuracy Combination Square Blades with the included lockbolts.

Replace your try square, miter square, depth gauge, marking gauge, 90° level, ruler, and scriber with one tool.

Attach to High-Accuracy Combination Square Blades with the included lockbolts.

A titanium coating protects the blade against scratches and wear.

An alternative to wood in structural applications, FRP fiberglass is strong and lightweight.

Offering excellent arc and track resistance, this GPO3 fiberglass is often used for electrical applications in humid environments.

Unlike similar U-channels, these GPO3 fiberglass hat channels have flanges for mounting to flat surfaces. Use them to route and insulate wire in humid environments.

A good all-around choice, Garolite G-10/FR4 is strong, machinable, and electrically insulating. It meets UL 94V0 for flame retardance.

Unlike metal channels, these carbon fiber U-channels won’t warp at extreme temperatures, so they’re ideal for heat treating and furnace fixtures.

Ensure accurate right angles and hold workpieces and fixtures perpendicular to a machine table by securing them to these plates with clamps.

Mount workpieces in precisely located holes for repeatable setups.

Measure, mark, and inspect exact angles on dies and other precision parts.

Build fixtures on multiple sides of these squares.

These metal guards provide more impact protection than plastic guards. Commonly used in warehouse and manufacturing areas, they protect corners on walls and other surfaces from impact.

The raised bulb adds cushioning to absorb more impact than other corner guards to protect corners on walls, cabinets, and other surfaces from impact.

Protect walls and other surfaces from impact.

Vibrant colors create a visual alert to draw attention to equipment and obstructions. These guards protect walls and other flat surfaces from impact.

The guards in this system have a metal core for added strength and stability. Combine corner guards and surface guards to create a system that protects walls and equipment from impact and wear. Often used in warehouse and manufacturing areas, these systems protect against damage from carts and vehicles.

This trim is suitable for use in food preparation and processing environments. It's also chemical resistant. Use it to protect the edges of panels, boards, signs, and mirrors from impact in food processing applications.

With a surface resistivity of 10 ⁵ ohms this trim safeguards equipment from static electricity by diverting electrostatic charges quickly. Made of plastic, it's also chemical resistant. Use it to protect the edges of of electronics equipment and circuit boards from impact.