When cleanliness is crucial to your application, choose these fittings that are individually cleaned and bagged to prevent contamination.

Made of plastic, these fittings are lightweight compared to our brass push-to-connect fittings.

Crimp these fittings to copper tubing with a crimping tool for a leak-tight connection that doesn’t require heat or soldering. They are comparable to Viega ProPress fittings.

A tube adapter sits flush against the flat face of the fitting so you can slide the steel tubing and fitting sideways to disconnect in cramped spaces. Also known as zero-clearance fittings.

Connect stainless steel tubing on one end and plastic tubing on the other end.

The flat face of the fitting connects to a tube adapter so you can slide the tubing and fitting sideways to disconnect in cramped spaces. They are also known zero-clearance fittings.

These Monel fittings have the corrosion resistance to handle hydrofluoric and sulfuric acid. Also known as instrumentation fittings, they include a nut with two sleeves.

Tube supports slip inside tubing to prevent the walls from collapsing.

Connect these fittings to tubing with a ring and a crimping tool (both sold separately). Safe to use with drinking water, these fittings meet the strict standards of NSF/ANSI 61.

Use these nuts with brass compression fittings to create a seal on plastic tubing. They meet NSF/ANSI 372 for use with drinking water.

Also known as instant fittings, they connect to tubing with a push, and an internal gripping ring and O-ring hold the tubing tight. Use in applications up to 150 psi.

Use these nuts and sleeves with compression fittings for food and beverage to create a seal on plastic tubing.

Made of PVDF (also known as Kynar), these fittings have excellent strength and can handle temperatures as high as 240° F or 270° F.

These quick-disconnect couplings meet NSF/ANSI 169 for food equipment.

Connect this pipe to standard-wall plastic pipe fittings in low- to medium-pressure applications up to 810 psi. It is typically used in residential and commercial plumbing and water supply applications.

Bolt two same-size flanges together with a gasket to create an access point within a line. They are also known as Class 150 flanges. They have thick, strong walls to handle heavy duty industrial plumbing and water supply applications, such as water processing, waste water treatment, and irrigation.

Extra-thick Schedule 120 walls give this pipe excellent strength in heavy duty industrial plumbing and water supply applications, such as water processing, waste water treatment, and irrigation. Use in high-pressure applications up to 1,000 psi. They connect to thick-wall plastic pipe fittings.

Use for pressures up to 60 psi. Also known as insert fittings, these slide into semi-flexible plastic pipe and secure with a clamp.

Bolt two same-size flanges together with a gasket to create an access point within a line. They are also known as Class 150 flanges. Use in high-temperature plumbing and water supply applications up to 200° F.

Connect these fittings to UV-resistant PVC pipe. Designed for outdoor use, they contain an additive that protects against the damaging effects of ultraviolet light. Fittings are typically used in low-pressure residential and commercial plumbing and water supply applications up to 300 psi.

Press these fittings onto stainless steel pipe using a crimping tool for a permanent, leak-tight connection that's faster than threading or welding and doesn't require heat.