Also known as hook-up wire, this wire is primarily used for wiring electrical panels, lighting, and plant floor equipment.

This wire meets stringent military specifications for material quality.

Even at 480° F—hotter than some industrial ovens—this wire’s insulation won’t melt.

Rated to 50 volts AC/DC, this wire is often used in small electronics and robotics. It withstands temperatures of 390° F and greater.

Our most chemical-resistant wire—the PTFE insulation protects against most chemicals, solvents, and oil.

The PEEK insulation on this wire won't degrade when exposed to radiation, and is often used in nuclear energy production.

Use this wire in high-voltage applications that require 10,000 volts DC or greater, such as in high-power signs and lasers.

The shielding in this wire blocks signal interference from nearby equipment and devices. When pulled lengthwise, it extends 40% and then returns to its original length, so it's useful for high-vibration applications.

Use this wire in automated applications that require 14,000 volts A/C or greater. It withstands continuous motion without degrading data or signal transmission.

Insulated with TPE, this wire won’t break down from oil, coolant, or chemicals, and it carries a strong signal even when repeatedly bent. This makes it great for greasy equipment on automated lines, such as lubricated cable carriers.

The EPDM insulation on this wire won’t become brittle or crack from sunlight, humidity, rain, temperature changes, abrasion from dirt and debris, and other rough outdoor conditions.

Keep multiple colors of wrap wire on hand to color code connections in circuit boards for easy identification.

This wire wraps around a post terminal on a circuit board to make an electrical connection, eliminating the need for soldering.

Originally designed to meet the quality standards of the auto industry, this wire withstands high temperatures, flames, and abrasion.

Connect batteries in generators, forklifts, and other vehicles in corrosive environments. Also known as marine wire, this copper wire is tin plated to resist corrosion from salt water, battery acid, and oil.

Use this general purpose cable to supply power to equipment.

After extending to full length to provide added reach, this cable retracts and self-coils for tangle-free storage. It's often used with hand tools and other portable devices.

Often used in computers, small electronics, and electronic prototyping, this cable is very flexible with small gauge wire to handle tight curves in narrow spaces.

A thick rubber insulation resists cuts and abrasion, so this cable can be pulled over rough surfaces without damaging the wires inside.

For high-heat applications such as furnaces and ovens, this cable's insulation withstands temperatures of 390° F and higher.

Weather-resistant insulation makes this cable suitable for outdoor use and direct burial without conduit.

Often used in automated applications such as robotics and cable carriers, this cable withstands continuous motion without degrading data or signal transmission.

A thick outer layer of silicone rubber insulation protects this cable from high voltages while remaining ultra flexible. It stands up to continuous motion without degrading data or signal transmission.

In addition to handling continuous movement, this cable withstands twisting up to 450° without degrading data or signal transmission. It's often used in welding robots and rotary tables.

Use this cable without conduit in automated applications—it meets crush and impact requirements for exposed runs in cable carriers, and withstands continuous motion without degrading data or signal transmission.

Often used in radio transmission, network connections, and digital audio feed, this cable transmits audio, video, and data signals.

Hook up speakers, intercoms, and other low-current devices to a building's communication wiring.

Connect devices such as sensors, programmable logic controllers, and actuators to an automated network.

This cable has twisted pairs of wires that cancel signal interference from multiple transmission lines. Use it for complex and high-speed data and signal transmission.

From mines and factories to robotics, this rugged Ethernet cable sends data between sensors and switches in the grimiest places.

Often used in automated applications that require continuous motion, this cable sends data between computers, servers, and switches without degrading signal transmission.

This cable is approved for use in vertical shafts and large facilities with multiple levels. It's often used for low-current circuits such as intercoms and security systems.

Also known as plenum cable, this cable has low-smoke insulation and can be used without conduit in ductwork and above a drop ceiling. Use it in low-current circuits such as intercoms and security systems.

Wire multiple components in your security system using a single cable.

Rated for in-wall installation, this cable carries power to wall outlets. Also known as branch circuit wire.

Also known as fixture whips, this cable has locknuts and fittings attached to the protective metal armor to secure it to a knockout. It's often used to connect light fixtures.

The metal armor on this cable acts as conduit to protect the internal wires. It's often used along the exterior of walls to carry power to outlet boxes. Also known as MC cable.

Nearly two-thirds the diameter of standard control cable, this cable fits in tight spaces. It sends signal and data to operate, measure, or regulate automated equipment.

Send signal and data to operate, measure, or regulate automated equipment such as conveyors and CNC machines.

Also known as festoon cable, this flat cable fits in confined spaces such as overhead cranes and hoists. It sends signal and data to operate, measure, or regulate automated equipment.

Made of thin, flattened wires, this flexible cable can be routed in tight spaces, such as inside a laptop.

This cable withstands abrasion, oil, and the rough conditions found in welding applications.

Connect equipment and devices to a power supply.

Designed for indoor applications, these cords are often used to power appliances.

These self-coiling cords stretch to full length and then return to their retracted length for tangle-free storage.

After a power failure, these cords must be manually reset, preventing unexpected equipment startup.

Transfer power between your door frame and door to power electric locks or exit devices.

Power hydraulic and air-powered valves, motors, pumps, and pressure switches.

With thick threads similar to a light bulb, these connectors take only a few turns to lock into place for a secure connection in washdown and high-vibration areas. Detach them just as quickly for frequent maintenance.

Connect flat flexible cable to circuit boards.

Often used in devices that branch off of the main power line, these connectors power high-amperage fans, pumps, and machines in motor controls, conveyors, and sorting and packaging systems.

Quickly mate these connectors by pushing them together. They're often used with 12 mm proximity switches and valves in automated systems.

Send signal and power to low-current devices with M8 connections in food processing and other sanitary applications.

Safely use these connectors with 12 mm proximity switches, console lights, valves, and power supplies in food, beverage, and pharmaceutical applications—they’re FDA compliant for direct food contact.

A TPE cable protects these connectors from oil, weld slag, and other tough industrial stresses as they send signal and power to low-current devices with M8 connections.

Power robotic arms and other high-amperage machines in motor controls, conveyors, and sorting and packaging systems from your main M35 power line.

Protect against signal interference while sending 2-3 times more current than M12 connectors.

Because they tightly thread to M12 connections, these connectors won’t let contaminants in or come loose from vibration in rugged industrial environments and automated systems as they send power and signal or just power to your equipment.

Block signal interference from nearby devices, such as motors and transmitters, while maintaining a strong, stable connection for M12 threads.

FDA compliant to safely touch food and threaded for a tight hold, these connectors won’t vibrate loose as they send high-speed data to sensors and other automated devices in food, beverage, and pharmaceutical plants.

Unlike traditional RJ45 connectors found in data centers, these connectors stand up to rugged industrial environments since they tightly thread to devices with M12 connections, sealing out contaminants and resisting shaking loose from vibration. Use them to transfer high-speed data between sensors, switches, computers, IO modules, programmable logic controllers (PLCs), and other equipment.

Often used to prototype or replace damaged connections, these connectors allow you to access and connect to individual USB pins.

These terminals are connected to a single-conductor wire lead.

Change the M8 8-pin connection on your Schunk gripper to wire leads for hardwiring robots that don’t have an M8 8-pin connection.