We will reply to your message within an hour.
Slide a sanding sleeve on the drum and tighten the nut or screw to securely hold the sleeve.
No tools required—twist the drum head by hand to tighten the sanding sleeve to the drum.
This drum is required to use a sanding sleeve with a Dremel grinder.
Slide a flap sanding sleeve on the drum and twist the drum by hand to secure the sleeve.
The shank on these spindles installs directly into grinder collets and drill chucks.
The integral arbor is more rigid for greater accuracy than a drill chuck used with a separate arbor.
Drill extremely small holes with a drill press using these adapters. The shank fits into a collet or adjustable drill chuck, and the other end securely holds a wire gauge drill bit.
These arbors are designed to absorb vibration.
Use these arbors with carbide saws and high-speed CNC machines.
Each of these sets comes with three differently sized arbors.
Hold and center high-speed steel slitting saws.
Pair these arbor adapters with hollow-core cutters when using a manual drill press or milling machine. Hollow-core cutters are also known as annular cutters.
Extend the reach of an end mill.
Mount large-diameter reamers to your drill press or other machine with these arbors.
Instead of widening a hole using a lathe, which turns the workpiece while the cutting tool stays still, use these holders to turn your boring bar in a milling machine and keep the workpiece stationary.
An expanding screw widens the end of the mandrel for a tight hold on the inside of a workpiece.
The mandrels in these sets have an expanding screw that widens the end of the mandrel for a tight hold on the inside of a workpiece.