A small swing radius lets you cut tubing in tight spaces. All have an enclosed adjustment screw to prevent damage from chips and debris.

Cutters with grooved rollers give clearance for cutting flared tube ends with little material loss.

Tighten the knob just once on cutters with an autofeed cutter wheel, and the wheel will automatically cut through the rest of the tubing.

Attach ratchet handles to cutters to control tube cutting in 10-degree increments. Use them to make precise cuts, even in tight spaces where hands don’t fit comfortably.

An enclosed ratchet feed opens quickly to accept tubing and instantly slides to cutting position. These cutters have grooved rollers for clearance to cut flared tube ends with little material loss. The adjustment screw is enclosed to prevent damage from chips and debris.

Enclosed steel bearings guide the cutting blade to create smooth cuts—even after repeated use. All have grooved rollers for clearance to cut flared tube ends with little material loss. They have an enclosed adjustment screw to prevent damage from chips and debris.

After cutting, crimp tubing in preparation for making connections. Rollers have a groove for clearance to cut flared tube ends with little material loss. An enclosed adjustment screw prevents damage from chips and debris.

Ratchet action permits cutting in cramped areas.

An insulated handle protects against shock from accidental contact with live electrical circuits. These cutters are tested to 1,000 volts to meet IEC 60900 and ASTM F1505. They have grooved rollers that provide clearance to cut flared tube ends with little material loss.

Made of materials that are FM approved, these cutters satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present. They're also nonmagnetic.

Warning: Do not use these tools in direct contact with acetylene.

Turn this cutter 360° around a pipe to make a cut.

Half the weight of other air-powered hacksaws, this saw reduces fatigue during prolonged use. It can also be used under water, in oil, and in slurries. Use this saw to cut pipes, angle iron, and other structural shapes. It has a speed control valve.

The plastic handle and included economy blade are good for light, general purpose cutting.

An insulated handle and frame protect against shock from accidental contact with live electrical circuits. These hacksaws are tested to 1,000 volts to meet IEC 60900 and ASTM F1505.

Nonslip, cushioned grips on the handle and front end let you get a tight grip with two hands while cutting tough materials.

Saw with blade storage compartment lets you conveniently store additional blades in the frame.

A higher air consumption rating allows this saw to work in longer bursts and power through tougher materials than the light duty air-powered hacksaw. It cuts pipe, angle iron, and other structural shapes. An off switch prevents accidental startup.

Chain clamps attach the saw to pipe for demolition work.

Extension chains are for use with the chain clamp for 6"-12 3/4" dia. pipe.

Saw blade guide keeps the blade centered on the cutting area.

Hacksaw blades of any length fit this saw to make cuts in holes and tight spaces.

This large-throat-depth saw makes deeper intricate cuts than standard hacksaws for tight curves.

Designed with a small frame and tapered nose, this saw makes cuts in tighter spots than standard hacksaws.