Material Material |
|---|
|
System of Measurement System of Measurement |
|---|
|
Body Material Body Material |
|---|
|
Clamp Type Clamp Type | Show |
|---|
|
Clamp Type Clamp Type | Hide |
|---|
|
|
Clamping Action Clamping Action |
|---|
 | Hold Down |
Base Mount Type Base Mount Type |
|---|
|
Holding Capacity Holding Capacity |
|---|
|
Clamping Surface Material Clamping Surface Material |
|---|
|
For Mounting Stem Diameter For Mounting Stem Diameter |
|---|
|
Body Finish Body Finish |
|---|
|
Clamping Surface Finish Clamping Surface Finish |
|---|
|
Clamping Surface Location Clamping Surface Location |
|---|
|
Handle Finish Handle Finish |
|---|
|
Screw Finish Screw Finish |
|---|
|
Bench-Mount No-Twist C-Clamps
Hold the workpiece down against a bench or table. The screw is separate from the pivoting clamping surface, moving it into place for a firm grip without twisting. The clamping surface and screw are copper plated to resist weld spatter. These are also known as cantilever clamps.
For technical drawings and 3-D models, click on a part number.
Overall | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Max. Clamping Clearance | Reach | Holding Capacity, lbs. | Screw Material | Lg. | Wd. | Ht. | No. of Mounting Holes (Diameter) | Mounting Fasteners Included | Each | |
Zinc-Plated Steel Body | ||||||||||
T-Handle | ||||||||||
| 2 1/2" | 2 1/2" | 1,500 | Copper-Plated Steel | 6 1/8" | 2 11/16" | 3 1/2" | 4 (9/32") 2 (1/4") | No | 0000000 | 000000 |
| 5" | 4 1/4" | 3,200 | Copper-Plated Steel | 8 7/8" | 3 3/4" | 5 3/4" | 6 (5/16") | No | 0000000 | 00000 |
Clamp-On Indicator Holders
Attach the C-clamp on these holders to your milling machine head to take indicator measurements without obstructing the cutting tool. Use the fine-adjustment rod to precisely position the arm.
Overall reach is the distance from the center of the C-clamp to the end of the arm when both are extended.
Clamp-On Indicator Holders for Bridgeport J Heads
Attach the C-clamp on this holder to your Bridgeport J head to take indicator measurements without obstructing the cutting tool. Use the fine-adjustment rod to precisely position the arm.
Overall reach is the distance from the center of the C-clamp to the end of the arm when both are extended.