About Selecting Thermal Insulation
More
Fiberglass Pipe Insulation
This common insulation material is typically used on hot and cold water lines and in process piping. To use outdoors, add metal jacketing.
Tubes, elbows, and tees are formed to provide the best fit on pipe and are the easiest to install. If your pipe is larger than the sizes we offer, choose a sheet/strip.
Tubes have an all-service jacket (ASJ) made of kraft paper with an adhesive strip closure. Seal with reinforced insulation tape (sold separately).
Sheets/strips with kraft paper facing have an all-service jacket (ASJ) made of kraft paper. Seal with reinforced insulation tape (sold separately).
- Temperature Range: 0° to 850° F
- Jacket Temperature Range: -20° to 150° F
- Heat Flow Rate: 0.23 Btu @ 75° F
- Density: 4.5 lbs./cu. ft.
- Color: Yellow
- Jacket Color: White
- Specifications Met: ASTM E84 25/50 for Flame and Smoke, ASTM C547, ASTM C585
| ID | For Pipe Size | For Copper Tube Size | Lg., ft. | Flexibility | R Value | Each | |
1/2" Wall Thick. | |||||||
|---|---|---|---|---|---|---|---|
| 5/8" | 3/8 | 1/2 | 3 | Rigid | 2.2 | 0000000 | 00000 |
| 7/8" | 1/2 | 3/4 | 3 | Rigid | 2.2 | 0000000 | 0000 |
| 1 1/8" | 3/4 | 1 | 3 | Rigid | 2.2 | 0000000 | 0000 |
| 1 3/8" | 1 | 1 1/4 | 3 | Rigid | 2.2 | 0000000 | 0000 |
| 1 5/8" | 1 1/4 | 1 1/2 | 3 | Rigid | 2.2 | 0000000 | 0000 |
| 1 7/8" | 1 1/2 | __ | 3 | Rigid | 2.2 | 0000000 | 0000 |
| 2 1/8" | __ | 2 | 3 | Rigid | 2.2 | 0000000 | 0000 |
| 2 3/8" | 2 | __ | 3 | Rigid | 2.2 | 0000000 | 0000 |
| 2 5/8" | __ | 2 1/2 | 3 | Rigid | 2.2 | 0000000 | 0000 |
| 2 7/8" | 2 1/2 | __ | 3 | Rigid | 2.2 | 0000000 | 0000 |
1" Wall Thick. | |||||||
| 5/8" | 3/8 | 1/2 | 3 | Rigid | 4.3 | 0000000 | 0000 |
| 7/8" | 1/2 | 3/4 | 3 | Rigid | 4.3 | 0000000 | 0000 |
| 1 1/8" | 3/4 | 1 | 3 | Rigid | 4.3 | 0000000 | 0000 |
| 1 3/8" | 1 | 1 1/4 | 3 | Rigid | 4.3 | 0000000 | 0000 |
| 1 5/8" | 1 1/4 | 1 1/2 | 3 | Rigid | 4.3 | 0000000 | 0000 |
| 1 7/8" | 1 1/2 | __ | 3 | Rigid | 4.3 | 0000000 | 0000 |
| 2 1/8" | __ | 2 | 3 | Rigid | 4.3 | 0000000 | 0000 |
| 2 3/8" | 2 | __ | 3 | Rigid | 4.3 | 0000000 | 0000 |
| 2 5/8" | __ | 2 1/2 | 3 | Rigid | 4.3 | 0000000 | 00000 |
| 2 7/8" | 2 1/2 | __ | 3 | Rigid | 4.3 | 0000000 | 00000 |
| 3 1/2" | __ | __ | 3 | Rigid | 4.3 | 0000000 | 00000 |
| 4 1/2" | 4 | __ | 3 | Rigid | 4.3 | 0000000 | 00000 |
| 5 1/2" | 5 | __ | 3 | Rigid | 4.3 | 0000000 | 00000 |
| 6 5/8" | 6 | __ | 3 | Rigid | 4.3 | 0000000 | 00000 |
| 8 5/8" | 8 | __ | 3 | Rigid | 4.3 | 0000000 | 00000 |
| 10 3/4" | 10 | __ | 3 | Rigid | 4.3 | 0000000 | 00000 |
| 12 3/4" | __ | __ | 3 | Rigid | 4.3 | 0000000 | 00000 |
1 1/2" Wall Thick. | |||||||
| 5/8" | 3/8 | 1/2 | 3 | Rigid | 6.5 | 0000000 | 00000 |
| 7/8" | 1/2 | 3/4 | 3 | Rigid | 6.5 | 0000000 | 00000 |
| 1 1/8" | 3/4 | 1 | 3 | Rigid | 6.5 | 0000000 | 00000 |
| 1 3/8" | 1 | 1 1/4 | 3 | Rigid | 6.5 | 0000000 | 00000 |
| 1 5/8" | 1 1/4 | 1 1/2 | 3 | Rigid | 6.5 | 0000000 | 00000 |
| 1 7/8" | 1 1/2 | __ | 3 | Rigid | 6.5 | 0000000 | 00000 |
| 2 1/8" | __ | 2 | 3 | Rigid | 6.5 | 0000000 | 00000 |
| 2 3/8" | 2 | __ | 3 | Rigid | 6.5 | 0000000 | 00000 |
| 2 5/8" | __ | 2 1/2 | 3 | Rigid | 6.5 | 0000000 | 00000 |
| 2 7/8" | 2 1/2 | __ | 3 | Rigid | 6.5 | 0000000 | 00000 |
| 3 1/2" | __ | __ | 3 | Rigid | 6.5 | 0000000 | 00000 |
| 4 1/2" | 4 | __ | 3 | Rigid | 6.5 | 0000000 | 00000 |
| 5 1/2" | 5 | __ | 3 | Rigid | 6.5 | 0000000 | 00000 |
| 6 5/8" | 6 | __ | 3 | Rigid | 6.5 | 0000000 | 00000 |
| 8 5/8" | 8 | __ | 3 | Rigid | 6.5 | 0000000 | 00000 |
| 10 3/4" | 10 | __ | 3 | Rigid | 6.5 | 0000000 | 00000 |
| 12 3/4" | __ | __ | 3 | Rigid | 6.5 | 0000000 | 00000 |
2" Wall Thick. | |||||||
| 7/8" | 1/2 | 3/4 | 3 | Rigid | 8.7 | 0000000 | 00000 |
| 1 1/8" | 3/4 | 1 | 3 | Rigid | 8.7 | 0000000 | 00000 |
| 1 3/8" | 1 | 1 1/4 | 3 | Rigid | 8.7 | 0000000 | 00000 |
| 1 5/8" | 1 1/4 | 1 1/2 | 3 | Rigid | 8.7 | 0000000 | 00000 |
| 1 7/8" | 1 1/2 | __ | 3 | Rigid | 8.7 | 0000000 | 00000 |
| 2 1/8" | __ | 2 | 3 | Rigid | 8.7 | 0000000 | 00000 |
| 2 3/8" | 2 | __ | 3 | Rigid | 8.7 | 0000000 | 00000 |
| 2 5/8" | __ | 2 1/2 | 3 | Rigid | 8.7 | 0000000 | 00000 |
| 2 7/8" | 2 1/2 | __ | 3 | Rigid | 8.7 | 0000000 | 00000 |
| 3 1/2" | __ | __ | 3 | Rigid | 8.7 | 0000000 | 00000 |
| 4 1/2" | 4 | __ | 3 | Rigid | 8.7 | 0000000 | 00000 |
| 5 1/2" | 5 | __ | 3 | Rigid | 8.7 | 0000000 | 00000 |
| 6 5/8" | 6 | __ | 3 | Rigid | 8.7 | 0000000 | 00000 |
| 8 5/8" | 8 | __ | 3 | Rigid | 8.7 | 0000000 | 00000 |
| 10 3/4" | 10 | __ | 3 | Rigid | 8.7 | 0000000 | 00000 |
| 12 3/4" | __ | __ | 3 | Rigid | 8.7 | 0000000 | 00000 |
3" Wall Thick. | |||||||
| 1 3/8" | 1 | 1 1/4 | 3 | Rigid | 13 | 00000000 | 00000 |
| 1 5/8" | 1 1/4 | 1 1/2 | 3 | Rigid | 13 | 00000000 | 00000 |
| 1 7/8" | 1 1/2 | __ | 3 | Rigid | 13 | 00000000 | 00000 |
| 2 3/8" | 2 | __ | 3 | Rigid | 13 | 00000000 | 00000 |
| 2 5/8" | __ | 2 1/2 | 3 | Rigid | 13 | 00000000 | 00000 |
| 2 7/8" | 2 1/2 | __ | 3 | Rigid | 13 | 00000000 | 00000 |
| 3 1/2" | __ | __ | 3 | Rigid | 13 | 00000000 | 00000 |
| 4 1/2" | 4 | __ | 3 | Rigid | 13 | 00000000 | 00000 |
| 5 1/2" | 5 | __ | 3 | Rigid | 13 | 00000000 | 00000 |
| 6 5/8" | 6 | __ | 3 | Rigid | 13 | 00000000 | 00000 |
| 8 5/8" | 8 | __ | 3 | Rigid | 13 | 00000000 | 00000 |
| Reinforced Insulation Tape (3" × 30 ft.) | 00000000 | Each | 000000 |
- Temperature Range: -60° to 450° F
- Facing Temperature Range: -40° to 150° F
- Heat Flow Rate: 0.27 Btu @ 75° F
- Density: 3 lbs./cu. ft.
- Color: Yellow
- Facing Color: White
Lightweight Melamine Foam Pipe Insulation
- Temperature Range: -40° to 350° F
- Jacket Temperature Range: -40° to 240° F
- Heat Flow Rate: 0.27 Btu @ 75° F
- Density: 0.44 lbs./cu. ft.
- Color: Gray
- Jacket Color: White
- Specifications Met: ASTM E84 25/50 for Flame and Smoke
Melamine has a lightweight construction that allows quick and easy installation. Use on cold and hot water piping and with refrigeration systems. Insulation has an all-service jacket (ASJ) made of kraft paper with an adhesive strip closure. Seal seams with silicone sealant and join lengths with tape (both sold separately).
1/2" Wall Thick. | 1" Wall Thick. | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| ID | For Pipe Size | For Copper Tube Size | Lg., ft. | Flexibility | R Value | Each | R Value | Each | ||
Tubes with Kraft Paper Jacketing | ||||||||||
| 1/2" | 1/4 | 3/8 | 4 | Rigid | 3 | 000000000 | 000000 | 7.4 | 00000000 | 000000 |
| 5/8" | 3/8 | 1/2 | 4 | Rigid | 3 | 000000000 | 00000 | 7.4 | 00000000 | 00000 |
| 3/4" | __ | __ | 4 | Rigid | 3 | 000000000 | 00000 | 7.4 | 00000000 | 00000 |
| 7/8" | 1/2 | 3/4 | 4 | Rigid | 3 | 000000000 | 00000 | 7.4 | 00000000 | 00000 |
| 1" | __ | __ | 4 | Rigid | 3 | 000000000 | 00000 | 7.4 | 00000000 | 00000 |
| 1 1/8" | 3/4 | 1 | 4 | Rigid | 3 | 000000000 | 00000 | 7.4 | 00000000 | 00000 |
| 1 3/8" | 1 | 1 1/4 | 4 | Rigid | 3 | 000000000 | 00000 | 7.4 | 00000000 | 00000 |
| 1 1/2" | __ | __ | 4 | Rigid | 3 | 000000000 | 00000 | 7.4 | 00000000 | 00000 |
| 1 5/8" | 1 1/4 | 1 1/2 | 4 | Rigid | 3 | 000000000 | 00000 | 7.4 | 00000000 | 00000 |
| 1 7/8" | 1 1/2 | __ | 4 | Rigid | 3 | 000000000 | 00000 | 7.4 | 00000000 | 00000 |
| 2" | __ | __ | 4 | Rigid | 3 | 000000000 | 00000 | 7.4 | 00000000 | 00000 |
| 2 3/8" | 2 | __ | 4 | Rigid | 3 | 000000000 | 00000 | 7.4 | 00000000 | 00000 |
| 2 1/2" | __ | __ | 4 | Rigid | 3 | 000000000 | 00000 | 7.4 | 00000000 | 00000 |
| 3" | __ | __ | 4 | Rigid | 3 | 000000000 | 00000 | 7.4 | 00000000 | 00000 |
| 4" | __ | __ | 4 | Rigid | 3 | 000000000 | 00000 | 7.4 | 00000000 | 000000 |
| 4 1/2" | 4 | __ | 4 | Rigid | 3 | 000000000 | 00000 | 7.4 | 00000000 | 000000 |
Rigid Fiberglass Duct Insulation Sheets
- Temperature Range: 0° to 450° F
- Facing Temperature Range: 0° to 150° F
- Heat Flow Rate: 0.23 Btu @ 75° F
- Density: See table
- Color: Yellow
- Facing Color:
Foil Facing: Silver;
Kraft Paper Facing: White - Specifications Met: ASTM E84 25/50 for Flame and Smoke
Insulate rectangular ductwork.
To seal sheets with kraft paper facing, use reinforced insulation tape (sold separately).
Fiberglass Building Insulation Sheets and Strips
Also known as batts, these fiberglass sheets and strips are used to insulate walls, ceilings, and floors.
Sheets/strips with kraft paper facing can be layered to increase thermal efficiency. Seal with reinforced insulation tape (sold separately).
