Choose a Category
Clear All
Specifications Met Specifications Met | Hide |
|---|
Warning: Products have one, but not necessarily all, of the selected characteristics.
|
|
System of Measurement System of Measurement |
|---|
|
Shape Shape |
|---|
 | Sheet and Bar |
 | Rod and Disc |
Tolerance Rating Tolerance Rating |
|---|
|
Temper Rating Temper Rating |
|---|
|
Yield Strength Yield Strength |
|---|
|
Appearance Appearance |
|---|
|
Fabrication Fabrication |
|---|
|
Hardness Hardness |
|---|
|
Melting Point Temperature Melting Point Temperature |
|---|
|
Surface Resistivity Surface Resistivity |
|---|
|
Modulus of Elasticity Modulus of Elasticity |
|---|
|
Thermal Conductivity Thermal Conductivity |
|---|
|
Density Density |
|---|
|
About Copper, Brass, and Bronze
More
Weldable Marine-Grade 464 Brass Sheets and Bars
A lead-free alternative to 485 brass, 464 brass offers good weldability, strength, and wear resistance. It’s widely used for marine hardware, pump and propeller shafts, and rivets.
Bars
- Yield Strength: 22,000 psi
- Hardness: Rockwell B55 (Soft)
- Temper: H02 (1/2 Hard)
- Heat Treatable: No
- Specifications Met: ASTM B21
| Wd. | Straightness Tolerance | 1 ft. Lg. | 3 ft. Lg. | 6 ft. Lg. | |
1/4" Thick. (-0.005" to 0.005" Tolerance) | |||||
|---|---|---|---|---|---|
| 1" | 1/2" per 10 ft. | 0000000 | |||
| 1 1/2" | 1/2" per 10 ft. | 0000000 | |||
3/8" Thick. (-0.005" to 0.005" Tolerance) | |||||
| 4" | 1/2" per 10 ft. | 0000000 | |||
1/2" Thick. (-0.005" to 0.005" Tolerance) | |||||
| 1/2" | 1/2" per 10 ft. | 0000000 | |||
| 1" | 1/2" per 10 ft. | 0000000 | |||
| 1 1/2" | 1/2" per 10 ft. | 0000000 | |||
| 2" | 1/2" per 10 ft. | 0000000 | |||
| 2 1/2" | 1/2" per 10 ft. | 0000000 | |||
| 3" | 1/2" per 10 ft. | 0000000 | |||
5/8" Thick. (-0.006" to 0.006" Tolerance) | |||||
| 5/8" | 1/2" per 10 ft. | 0000000 | |||
3/4" Thick. (-0.006" to 0.006" Tolerance) | |||||
| 3/4" | 1/2" per 10 ft. | 0000000 | |||
| 1" | 1/2" per 10 ft. | 0000000 | |||
| 1 1/2" | 1/2" per 10 ft. | 0000000 | |||
| 3" | 1/2" per 10 ft. | 0000000 | |||
1" Thick. (-0.006" to 0.006" Tolerance) | |||||
| 1" | 1/2" per 10 ft. | 0000000 | |||
| 1 1/4" | 1/2" per 10 ft. | 0000000 | |||
| 1 1/2" | 1/2" per 10 ft. | 0000000 | |||
| 2" | 1/2" per 10 ft. | 0000000 | |||
| 3" | 1/2" per 10 ft. | 0000000 | |||
1 1/2" Thick. (-0.007" to 0.007" Tolerance) | |||||
| 1 1/2" | 1/2" per 10 ft. | 0000000 | |||
2" Thick. (-0.007" to 0.007" Tolerance) | |||||
| 2" | 1/2" per 10 ft. | 0000000 | |||
Weldable Marine-Grade 464 Brass Rods
- Yield Strength: 22,000 psi
- Hardness: Rockwell B55 (Soft)
- Temper: H02 (1/2 Hard)
- Heat Treatable: No
- Specifications Met: ASTM B21
A lead-free alternative to 485 brass, 464 brass offers good weldability, strength, and wear resistance. It’s widely used for marine hardware, pump and propeller shafts, and rivets.
| Dia. | Dia. Tolerance Range | Straightness Tolerance | 1 ft. Lg. | 3 ft. Lg. | 6 ft. Lg. | |
| 3/16" | -0.003" to 0.003" | 1/2" per 10 ft. | 0000000 | |||
| 1/4" | -0.003" to 0.003" | 1/2" per 10 ft. | 0000000 | |||
| 5/16" | -0.003" to 0.003" | 1/2" per 10 ft. | 0000000 | |||
| 3/8" | -0.003" to 0.003" | 1/2" per 10 ft. | 0000000 | |||
| 7/16" | -0.003" to 0.003" | 1/2" per 10 ft. | 0000000 | |||
| 1/2" | -0.003" to 0.003" | 1/2" per 10 ft. | 0000000 | |||
| 9/16" | -0.003" to 0.003" | 1/2" per 10 ft. | 0000000 | |||
| 5/8" | -0.003" to 0.003" | 1/2" per 10 ft. | 0000000 | |||
| 3/4" | -0.003" to 0.003" | 1/2" per 10 ft. | 0000000 | |||
| 7/8" | -0.003" to 0.003" | 1/2" per 10 ft. | 0000000 | |||
| 1" | -0.003" to 0.003" | 1/2" per 10 ft. | 0000000 | |||
| 1 1/4" | -0.003" to 0.003" | 1/2" per 10 ft. | 0000000 | |||
| 1 1/2" | -0.003" to 0.003" | 1/2" per 10 ft. | 0000000 | |||
| 2" | -0.003" to 0.003" | 1/2" per 10 ft. | 0000000 |
Marine-Grade 485 Brass
- Yield Strength: 25,000 psi
- Hardness:
3/16" to 7/16" dia. rods: Not Rated
All other sizes: Rockwell B60 (Soft) - Temper:
3" dia. rods: M30
All other sizes: H02 (1/2 Hard) - Heat Treatable: No
- Specifications Met: ASTM B21
Also known as high-leaded naval brass, 485 brass contains lead for good machinability. It is commonly used for marine hardware, valve stems, and screw machine products.
| Dia. | Dia. Tolerance Range | 1 ft. Lg. | 3 ft. Lg. | 6 ft. Lg. | |
| 3/16" | -0.002" to 0.002" | 0000000 | |||
| 1/4" | -0.002" to 0.002" | 0000000 | |||
| 5/16" | -0.002" to 0.002" | 0000000 | |||
| 3/8" | -0.002" to 0.002" | 0000000 | |||
| 7/16" | -0.002" to 0.002" | 0000000 | |||
| 1/2" | -0.002" to 0.002" | 0000000 | |||
| 5/8" | -0.002" to 0.002" | 0000000 | |||
| 3/4" | -0.002" to 0.002" | 0000000 | |||
| 7/8" | -0.002" to 0.002" | 0000000 | |||
| 1" | -0.002" to 0.002" | 0000000 | |||
| 1 1/8" | -0.003" to 0.003" | 0000000 | |||
| 1 1/4" | -0.003" to 0.003" | 0000000 | |||
| 1 3/8" | -0.003" to 0.003" | 0000000 | |||
| 1 1/2" | -0.003" to 0.003" | 0000000 | |||
| 1 3/4" | -0.003" to 0.003" | 0000000 | |||
| 2" | -0.003" to 0.003" | 0000000 | |||
| 3" | -0.005" to 0.005" | 0000000 |