McMaster-Carr

Search Results

Clear All

	Specifications Met Specifications Met	Show

ASTM

ASTM B370

	Specifications Met Specifications Met	Hide

Warning: Products have one, but not necessarily all, of the selected characteristics.

ABS

AMS

CSA

Fed. Spec.

Federal Reduction of
Lead in Drinking Water
Act

Federal Safe Drinking
Water Act

HAR

Mil. Spec.

MSHA

NEC

NEMA

NFPA

NSF/ANSI

QQ-C-390, G3

SAE

	System of Measurement System of Measurement

Inch

	Thickness Thickness

	Width Width

12"

24"

36"

	Length Length

	Material Material

Copper

	Shape Shape

	Sheet and Bar

	Temper Rating Temper Rating

Softened (Annealed)

1/4 Hard

	Tolerance Rating Tolerance Rating

Standard

	Temper Temper

H01

Not Rated

	Appearance Appearance

Plain

	Yield Strength Yield Strength

Not Rated

	Heat Treatable Heat Treatable

	Hardness Rating Hardness Rating

Soft

	Hardness Hardness

Rockwell F40

	Fabrication Fabrication

Cold Worked

	Melting Point Temperature Melting Point Temperature

1949° F

	Modulus of Elasticity Modulus of Elasticity

17.0 ksi × 10³

	Surface Resistivity Surface Resistivity

10.3 Ohms

	Elongation Elongation

45%

	Thermal Conductivity Thermal Conductivity

226 Btu/hr. × ft./°F @
68° F

	Density Density

0.322 lbs./cu. in.

View catalog pages (3)

Forward

How can we improve?

120 Products

About Copper, Brass, and Bronze

Offering high electrical conductivity and formability, 110 copper is 99.9% pure. Also known as ETP copper, it's often used in electrical applications, such as for bus bars and wire connectors, as well as for flashing, gaskets, and rivets.

Softened (Annealed) Temper Sheets

Yield Strength: See table
Hardness: See table
Temper Rating: Softened (Annealed)
Heat Treatable: No
Specifications Met:
0.021" to 0.062" thick. sheets: ASTM B152, ASTM B370
All other sizes: ASTM B152

2" × 24"
Thick.	Thick. Tolerance Range	Yield Strength, psi	Hardness		Each
0.021"	-0.003" to 0.003"	Not Rated	Rockwell F40 (Soft)	00000000	00000
0.027"	-0.004" to 0.004"	Not Rated	Rockwell F40 (Soft)	00000000	00000
0.032"	-0.004" to 0.004"	Not Rated	Rockwell F40 (Soft)	00000000	00000
0.043"	-0.005" to 0.005"	Not Rated	Rockwell F40 (Soft)	00000000	00000
0.062"	-0.006" to 0.006"	Not Rated	Rockwell F40 (Soft)	00000000	00000
4" × 24"
0.021"	-0.003" to 0.003"	Not Rated	Rockwell F40 (Soft)	00000000	00000
0.027"	-0.004" to 0.004"	Not Rated	Rockwell F40 (Soft)	00000000	00000
0.032"	-0.004" to 0.004"	Not Rated	Rockwell F40 (Soft)	00000000	00000
0.043"	-0.005" to 0.005"	Not Rated	Rockwell F40 (Soft)	00000000	00000
0.062"	-0.006" to 0.006"	Not Rated	Rockwell F40 (Soft)	00000000	00000
6" × 6"
0.021"	-0.003" to 0.003"	Not Rated	Rockwell F40 (Soft)	00000000	0000
0.027"	-0.004" to 0.004"	Not Rated	Rockwell F40 (Soft)	00000000	0000
0.032"	-0.004" to 0.004"	Not Rated	Rockwell F40 (Soft)	00000000	0000
0.043"	-0.005" to 0.005"	Not Rated	Rockwell F40 (Soft)	00000000	00000
0.062"	-0.006" to 0.006"	Not Rated	Rockwell F40 (Soft)	00000000	00000
6" × 24"
0.021"	-0.003" to 0.003"	Not Rated	Rockwell F40 (Soft)	00000000	00000
0.027"	-0.004" to 0.004"	Not Rated	Rockwell F40 (Soft)	00000000	00000
0.032"	-0.004" to 0.004"	Not Rated	Rockwell F40 (Soft)	00000000	00000
0.043"	-0.005" to 0.005"	Not Rated	Rockwell F40 (Soft)	00000000	00000
0.062"	-0.006" to 0.006"	Not Rated	Rockwell F40 (Soft)	00000000	00000
12" × 12"
0.021"	-0.003" to 0.003"	Not Rated	Rockwell F40 (Soft)	0000000	00000
0.027"	-0.004" to 0.004"	Not Rated	Rockwell F40 (Soft)	0000000	00000
0.032"	-0.004" to 0.004"	Not Rated	Rockwell F40 (Soft)	0000000	00000
0.043"	-0.005" to 0.005"	Not Rated	Rockwell F40 (Soft)	0000000	00000
0.062"	-0.006" to 0.006"	Not Rated	Rockwell F40 (Soft)	0000000	00000
12" × 24"
0.021"	-0.003" to 0.003"	Not Rated	Rockwell F40 (Soft)	0000000	00000
0.027"	-0.004" to 0.004"	Not Rated	Rockwell F40 (Soft)	0000000	00000
0.032"	-0.004" to 0.004"	Not Rated	Rockwell F40 (Soft)	0000000	00000
0.043"	-0.005" to 0.005"	Not Rated	Rockwell F40 (Soft)	0000000	00000
0.062"	-0.006" to 0.006"	Not Rated	Rockwell F40 (Soft)	0000000	00000
12" × 48"
0.021"	-0.003" to 0.003"	Not Rated	Rockwell F40 (Soft)	00000000	00000
0.027"	-0.004" to 0.004"	Not Rated	Rockwell F40 (Soft)	00000000	00000
0.032"	-0.004" to 0.004"	Not Rated	Rockwell F40 (Soft)	00000000	00000
0.043"	-0.005" to 0.005"	Not Rated	Rockwell F40 (Soft)	00000000	00000
0.062"	-0.006" to 0.006"	Not Rated	Rockwell F40 (Soft)	00000000	000000
24" × 24"
0.021"	-0.003" to 0.003"	Not Rated	Rockwell F40 (Soft)	00000000	00000
0.027"	-0.004" to 0.004"	Not Rated	Rockwell F40 (Soft)	00000000	00000
0.032"	-0.004" to 0.004"	Not Rated	Rockwell F40 (Soft)	00000000	00000
0.043"	-0.005" to 0.005"	Not Rated	Rockwell F40 (Soft)	00000000	00000
0.062"	-0.006" to 0.006"	Not Rated	Rockwell F40 (Soft)	00000000	000000
36" × 48"
0.021"	-0.003" to 0.003"	Not Rated	Rockwell F40 (Soft)	0000000	000000
0.027"	-0.004" to 0.004"	Not Rated	Rockwell F40 (Soft)	0000000	000000
0.032"	-0.004" to 0.004"	Not Rated	Rockwell F40 (Soft)	0000000	000000
0.043"	-0.005" to 0.005"	Not Rated	Rockwell F40 (Soft)	0000000	000000
0.062"	-0.006" to 0.006"	Not Rated	Rockwell F40 (Soft)	0000000	000000
36" × 96"
0.021"	-0.003" to 0.003"	Not Rated	Rockwell F40 (Soft)	0000000	000000
0.027"	-0.004" to 0.004"	Not Rated	Rockwell F40 (Soft)	0000000	000000
0.032"	-0.004" to 0.004"	Not Rated	Rockwell F40 (Soft)	0000000	000000
0.043"	-0.005" to 0.005"	Not Rated	Rockwell F40 (Soft)	0000000	000000
0.062"	-0.006" to 0.006"	Not Rated	Rockwell F40 (Soft)	0000000	000000

1/8 to 1/4 Hard Temper Sheets

Yield Strength: Not Rated
Hardness: Rockwell F40 (Soft)
Temper:
0.016" thick. sheets: H01 (1/4 Hard)
0.25" thick. sheets: H00 (1/8 Hard)
All other sizes: H00 (1/8 Hard) to H01 (1/4 Hard)
Heat Treatable: No
Specifications Met:
0.016" thick. sheets: ASTM B152, ASTM B370
All other sizes: ASTM B152

2" × 24"
Thick.	Thick. Tolerance Range		Each
0.016"	-0.003" to 0.003"	00000000	00000
4" × 24"
0.016"	-0.003" to 0.003"	00000000	00000
6" × 6"
0.016"	-0.003" to 0.003"	00000000	0000
6" × 24"
0.016"	-0.003" to 0.003"	00000000	00000
12" × 12"
0.016"	-0.003" to 0.003"	0000000	00000
12" × 24"
0.016"	-0.003" to 0.003"	0000000	00000
12" × 48"
0.016"	-0.003" to 0.003"	00000000	00000
24" × 24"
0.016"	-0.003" to 0.003"	00000000	00000
36" × 48"
0.016"	-0.003" to 0.003"	0000000	000000
36" × 96"
0.016"	-0.003" to 0.003"	0000000	000000

Multipurpose 110 Copper Sheets
and Bars with Certification

These sheets and bars come with a traceable lot number and test report. Offering high electrical conductivity and formability, 110 copper is 99.9% pure. Also known as ETP copper, it's often used in electrical applications, such as for bus bars and wire connectors, as well as for flashing, gaskets, and rivets.

Softened (Annealed) Temper Sheets

Yield Strength: Not Rated
Hardness: Rockwell F40 (Soft)
Temper Rating: Softened (Annealed)
Heat Treatable: No
Specifications Met:
0.021" to 0.062" thick. sheets: ASTM B152, ASTM B370
All other sizes: ASTM B152

2" × 24"
Thick.	Thick. Tolerance Range		Each
0.021"	-0.003" to 0.003"	0000000	000000
0.027"	-0.004" to 0.004"	0000000	00000
0.032"	-0.004" to 0.004"	0000000	00000
0.043"	-0.005" to 0.005"	0000000	00000
0.062"	-0.006" to 0.006"	0000000	00000
4" × 24"
0.021"	-0.003" to 0.003"	0000000	00000
0.027"	-0.004" to 0.004"	0000000	00000
0.032"	-0.004" to 0.004"	0000000	00000
0.043"	-0.005" to 0.005"	0000000	00000
0.062"	-0.006" to 0.006"	0000000	00000
6" × 6"
0.021"	-0.003" to 0.003"	0000000	00000
0.027"	-0.004" to 0.004"	0000000	00000
0.032"	-0.004" to 0.004"	0000000	00000
0.043"	-0.005" to 0.005"	0000000	00000
0.062"	-0.006" to 0.006"	0000000	00000
6" × 24"
0.021"	-0.003" to 0.003"	0000000	00000
0.027"	-0.004" to 0.004"	0000000	00000
0.032"	-0.004" to 0.004"	0000000	00000
0.043"	-0.005" to 0.005"	0000000	00000
0.062"	-0.006" to 0.006"	0000000	00000
12" × 12"
0.021"	-0.003" to 0.003"	0000000	00000
0.027"	-0.004" to 0.004"	0000000	00000
0.032"	-0.004" to 0.004"	0000000	00000
0.043"	-0.005" to 0.005"	0000000	00000
0.062"	-0.006" to 0.006"	0000000	00000
12" × 24"
0.021"	-0.003" to 0.003"	0000000	00000
0.027"	-0.004" to 0.004"	0000000	00000
0.032"	-0.004" to 0.004"	0000000	00000
0.043"	-0.005" to 0.005"	0000000	00000
0.062"	-0.006" to 0.006"	0000000	00000
12" × 48"
0.021"	-0.003" to 0.003"	0000000	00000
0.027"	-0.004" to 0.004"	0000000	00000
0.032"	-0.004" to 0.004"	0000000	00000
0.043"	-0.005" to 0.005"	0000000	000000
0.062"	-0.006" to 0.006"	0000000	000000
24" × 24"
0.021"	-0.003" to 0.003"	0000000	00000
0.027"	-0.004" to 0.004"	0000000	00000
0.032"	-0.004" to 0.004"	0000000	00000
0.043"	-0.005" to 0.005"	0000000	000000
0.062"	-0.006" to 0.006"	0000000	000000
36" × 48"
0.021"	-0.003" to 0.003"	0000000	000000
0.027"	-0.004" to 0.004"	0000000	000000
0.032"	-0.004" to 0.004"	0000000	000000
0.043"	-0.005" to 0.005"	0000000	000000
0.062"	-0.006" to 0.006"	0000000	000000
36" × 96"
0.021"	-0.003" to 0.003"	00000000	000000
0.027"	-0.004" to 0.004"	00000000	000000
0.032"	-0.004" to 0.004"	00000000	000000
0.043"	-0.005" to 0.005"	00000000	000000
0.062"	-0.006" to 0.006"	00000000	000000

1/8 to 1/4 Hard Temper Sheets

Yield Strength: Not Rated
Hardness: Rockwell F40 (Soft)
Temper:
0.016" thick sheets: H01 (1/4 Hard)
All other sizes: H00 (1/8 Hard) to H01 (1/4 Hard)
Heat Treatable: No
Specifications Met:
0.016" thick sheets: ASTM B152, ASTM B370
All other sizes: ASTM B152

2" × 24"
Thick.	Thick. Tolerance Range		Each
0.016"	-0.003" to 0.003"	0000000	000000
4" × 24"
0.016"	-0.003" to 0.003"	0000000	00000
6" × 6"
0.016"	-0.003" to 0.003"	0000000	00000
6" × 24"
0.016"	-0.003" to 0.003"	0000000	00000
12" × 12"
0.016"	-0.003" to 0.003"	0000000	00000
12" × 24"
0.016"	-0.003" to 0.003"	0000000	00000
12" × 48"
0.016"	-0.003" to 0.003"	0000000	00000
24" × 24"
0.016"	-0.003" to 0.003"	0000000	00000
36" × 48"
0.016"	-0.003" to 0.003"	0000000	000000
36" × 96"
0.016"	-0.003" to 0.003"	00000000	000000

Terms and Conditions and Privacy Policy

About Copper, Brass, and Bronze

Multipurpose 110 Copper Sheets and Bars

Multipurpose 110 Copper Sheetsand Bars with Certification

Multipurpose 110 Copper Sheets and Bars

Multipurpose 110 Copper Sheetsand Bars with Certification

Multipurpose 110 Copper Sheets
and Bars with Certification

Multipurpose 110 Copper Sheets
and Bars with Certification