Choose these screws for their adherence to strict military standards for material and construction. Their high tensile strength means they can be used in demanding, high-stress applications.

About half as strong as medium-strength steel screws, these screws can be used for light duty fastening applications, such as securing access panels.

With the strength of steel and the corrosion resistance of 18-8 stainless steel, these 17-4 PH stainless steel screws are suitable for high-strength fastening in corrosive environments.

The most common heavy hex head screw, these steel screws meet ASTM A325 regulations for structural joints, such as mating I-beams and scaffolding.

These Grade B7 steel screws are nearly twice as strong as our stainless steel screws for high-pressure applications. Also known as pressure bolts, they meet the high-pressure, high-temperature regulations of ASTM A193 and are used to secure pressure tanks, valves, and flanges.

Made from 316 stainless steel, these Grade B8M screws are more corrosion resistant than 18-8 stainless steel screws and have excellent resistance to chemicals and salt water. Screws meet ASTM A193 regulations, so they can be used in high-pressure and high-temperature applications. Also known as pressure bolts.

Tighten these screws by turning them to the left; once fastened, they prevent counterclockwise-moving parts from loosening.

These screws are specially tempered to meet ASTM A193 specifications for temperatures up to 1100° F.

Made of alloy steel, these low-profile screws are nearly twice as strong as their stainless steel counterparts. With half the height of a standard socket head, these low-profile screws fit in tight spaces.

Stainless steel screws have excellent corrosion resistance in most environments. Wire these screws together for more vibration resistance than other types of socket head screws.

A freely rotating washer distributes pressure over a wider area than a flange, preventing damage to your material's surface.

The nonmarring brass tip is electrically conductive and harder than nylon, but soft enough to conform to most surfaces and reduce damage from metal-on-metal contact.

More corrosion resistant than 18-8 stainless steel screws, these button head screws have excellent resistance to chemicals and salt water. They may be mildly magnetic.

Made from 18-8 stainless steel, these screws have good chemical resistance and may be mildly magnetic. Torx and Torx-Plus drives have more points of contact than other drives, allowing you to tighten the screw without damaging the recess.

Made from alloy steel, these screws are nearly twice as strong as stainless steel button head screws. They have a flange that distributes pressure across a wide surface, eliminating the need for a separate washer.

To prevent unwanted removal, these metric screws have a tamper-resistant Torx drive—also known as a pin-in Torx drive—that makes them difficult to unscrew without special tools. An O-ring under the head blocks leaks and seals out dust and dirt.

Made from alloy steel, these screws are nearly twice as strong as stainless steel button head screws.

Made from alloy steel, these screws are nearly twice as strong as stainless steel button head screws.

Choose these screws for their adherence to strict military standards for material and construction.

More corrosion resistant than 18-8 stainless steel screws, these screws have excellent resistance to chemicals and salt water. They may be mildly magnetic.

Made from alloy steel, these screws are twice as strong as standard steel Torx flat head screws.

With a tamper-resistant hex drive (also known as a pin-in hex drive), these metric screws are difficult to remove without special tools.

Stainless steel screws have excellent corrosion resistance in most environments.

Comparable to Class 12.9 steel.

A locking element on the threads adds friction to resist loosening. Comparable to Grade 8 steel, these alloy steel shoulder screws are the strongest we offer.

About half the strength of medium-strength bolts, these bolts are for light duty fastening. Carriage bolts have a smooth, rounded head for a finished look. The knurled neck grips the inside of the hole to keep these bolts from turning when tightening a nut.

These alloy steel set screws have a thin edge that digs into hard surfaces for a secure hold. A nylon locking element grips threads to resist loosening.

A nylon locking patch grips threads to resist loosening.

These metric set screws have a brass tip, which is harder than nylon and silver, for a secure hold on hard surfaces. The body has a black-oxide finish to resist corrosion in dry environments.

Also known as half dog-point set screws, these set screws have a protruding tip that locks within a mating hole or slot to keep parts aligned.

Also known as full dog-point set screws, the tip is twice as long as the tip on other extended-tip set screws for greater engagement in deep mating holes.

These alloy steel set screws have a pointed tip that wedges into the contact surface for a secure hold on soft materials such as brass.

These steel screws are hot-dipped galvanized to resist corrosion in wet environments.

Drive these hangers into wood with an adjustable wrench, pliers, or a special driver bit.

Install these rounded head screws through a hole and thread on a retainer to keep secure—no special tools are required.

These metric Grade B7 fine-threaded rods meet the pressure and temperature requirements of ASTM A193 and are often used to secure pressure tanks, valves, and flanges.

Tighten these threaded rods by turning them to the left; once fastened, they resist loosening from counterclockwise motion.

These are Grade 8 threaded rods.

Stronger and more wear resistant than 18-8 stainless steel, these threaded rods are mildly chemical resistant. They meet the pressure and temperature requirements of ASTM A193 and are often used to secure pressure tanks, valves, and flanges.

Grade B8M threaded rods meet the pressure and temperature requirements of ASTM A193 and are often used to secure pressure tanks, valves, and flanges.

The most corrosion resistant stainless steel threaded rods we offer, these Alloy 20 stainless steel threaded rods contain nickel to withstand exposure to sulfuric, phosphoric, and nitric acids.

Titanium threaded rods have a high strength-to-weight ratio and are resistant to acids and salt water.

Bronze threaded rods are stronger and more resistant to salt water than brass rods.

These stud anchors strengthen the parts of buildings where steel framing connects to concrete. They’re also known as Nelson studs.

In addition to joining male- and female-threaded parts, these adapters can increase or decrease metric thread sizes and change the thread pitch.

Need to join two female-threaded parts, such as coupling nuts, with dissimilar inch thread sizes? Attach them to these adapters and tighten the exterior hex nut for a secure connection.

One side inch, one side metric, and a hex in the middle—these handy fasteners connect two female-threaded parts, such as coupling nuts, adapting from inch threads to metric. Tighten with a standard wrench.

These assortments include button head screws.

These standoffs are made to NAS specifications.