This rubber has better shock absorbing qualities and will provide longer life than Standard Multipurpose Neoprene.

While other black rubber can leave a mark after use, these specially formulated neoprene sheets leave no evidence behind.

Made from FDA-listed materials for use with food.

With one layer of nylon fabric for every 1/16” of thickness, these sheets have the strength to be used as flange gaskets, diaphragm packing, and anywhere heavy compression would squeeze nonreinforced neoprene out of place.

Jackets, seals, and insulation are just a few of the many uses for rubber tubes.

Greater strength than standard High-Temperature Silicone translates into better shock-absorbing qualities and longer life.

FDA compliant, these sheets and strips are approved for direct contact with food.

The open top allows U-channels to slide over an edge. Use them as seals and trim.

Seal and cushion corners with these 90° angles.

With nearly twice the tensile strength of standard high-temperature silicone, these 90° angles absorb shock better and last longer.

These sheets and strips offer better shock-absorbing qualities and longer life than standard Oil-Resistant Buna-N.

The addition of vinyl make these sheets the strongest Food Industry Oil-Resistant rubber we offer. Use them for high-tension applications, such as belting. They’re made from FDA-listed materials for use with food and offer good resistance to animal and vegetable oils.

Because these sheets and strips are made from peroxide-cured Buna-N rubber, they have better heat resistance than standard Oil-Resistant Buna-N rubber sheets and strips.

To maintain their size and shape under heavy compression, these sheets have one layer of nylon fabric for every 1/16” of thickness. Use them as flange gaskets and diaphragm packing.

With greater strength than standard Weather-Resistant EPDM, these sheets and strips provide better shock-absorbing qualities and longer life.

For every 1/16" of thickness, there is one layer of super-strong fiberglass cloth that stands up to high stress and flex. Use these sheets as flange gaskets and anywhere heavy compression would squeeze nonreinforced EPDM out of place.

Resistant to sunlight, ozone, and water, these 90° angles are good for sealing and cushioning corners.

This polyurethane combines the shock absorbing qualities of rubber with the tear resistance of plastic. Use it for high-tension applications such as conveyor belts, as well as for high-wear applications such as cutting surfaces, bumpers, and liners.