Pump the handle to pressurize the tank, then squeeze the trigger on the wand to spray. These sprayers are often used for degreasers, insecticides, disinfectants, cleaning solutions, and herbicides.

Style A, B, and C sprayers have a trigger that locks for continuous spray.

Style A sprayers have a filter in the tank to prevent clogs.

Note: The material of the parts can affect a sprayer's compatibility with a chemical or solution. Make sure the tank, seal, wand, and nozzle are suitable for your application.

These sprayers have a more durable construction than our other plastic hand-pump sprayers. They have a large fill opening for easy filling and cleaning. Pump the handle to pressurize the tank, then squeeze the trigger on the wand to spray. They are often used for degreasers, insecticides, disinfectants, cleaning solutions, and herbicides. They have a trigger that can be locked for continuous spray.

Note: The material of the parts can affect a sprayer's compatibility with a chemical or solution. Make sure the tank, seal, wand, and nozzle are suitable for your application.

Pump the handle to pressurize the tank, then squeeze the trigger on the wand to spray. These sprayers are often used for degreasers, insecticides, disinfectants, cleaning solutions, and herbicides. They have a trigger that can be locked for continuous spray.

Note: The material of the parts can affect a sprayer's compatibility with a chemical or solution. Make sure the tank, seal, wand, and nozzle are suitable for your application.

Sprayers with a filter prevent clogs.

Sprayers with an extended handle let you pump, pick up, and put down sprayers without bending over, saving you from back strain.

Sprayers with a spray shield focus your spray so that chemicals go only where intended.

Small enough to spray with one hand, these foamers aerate cleaners to create a foam that breaks down dirt and grime. The foam is easier to see than liquid cleaners and clings where liquid cleaners might drip. They can also be used as sprayers. Swap out the included nozzles as needed—go from a fine mist for delicate surfaces to a powerful stream to remove stuck-on material. The polyethylene tank is lightweight and resists impact and chemicals. The Viton® fluoroelastomer seal resists chemicals too, so you can use these foamers with a variety of solvents and acids.

For large cleaning jobs, these backpack foamers stay pressurized with a rechargeable battery, so you don't have to stop to pump or plug them in. They aerate cleaners and create a foam that breaks down dirt and grime. The foam is easier to see than liquid cleaners and clings where liquid might drip. They can also be used as sprayers. Swap out the included nozzles to switch between patterns ranging from a fine mist for delicate surfaces to a powerful stream to remove stuck-on material. These foamers also have a trigger that can be locked for continuous spray.

All the components—from the stainless steel wand to the Viton® fluoroelastomer seal—stand up to a variety of solvents and acids. The polyethylene tank is lightweight and resists impact. A built-in filter helps prevent grass and debris from creating clogs.

Foamers with 2-90 psi operating pressure let you change their pressure based on the job. Use less pressure on delicate surfaces and more pressure for aggressive cleaning.

Wheel these electric-powered sprayers wherever needed to disinfect surfaces and equipment in bathrooms, schools, gyms, and worksites without any manual pumping. Their wheels won’t leave streaks on your floors and they have a brake to keep them in place. Fill these sprayers with liquid disinfectants that kill bacteria, viruses, and other germs that cause disease. But, do not use them with oil-based or flammable products. Check the liquid level in the semi-clear tank to know when it’s time to refill; a full tank should give about three and a half hours of run time. The wand is light enough to hold with only one hand, and the nozzle releases disinfectant as a fine mist to coat surfaces evenly. To disinfect hard-to-reach spots and access multiple areas without unplugging and moving these sprayers, they come with a 25 ft. long hose. They also have an inline strainer to prevent clogs.

Note: The material of the parts can affect a sprayer's compatibility with a chemical or solution. Make sure that all parts of the sprayer are suitable for your application.

Fill the reservoir, attach the propellant cartridge, and spray.

Glass sprayer sprays up to 16 oz. with the included propellant. Plastic sprayer sprays up to 18 oz. with the included propellant.

Spray liquids with these fillable bottles—the head twists on and off to make filling easy.

Clear and semi-clear bottles let you keep an eye on the liquid level.

Style B has a filter at the base of the tube to prevent clogs.

Style C has a checklist of nine common cleaners and solutions to quickly identify contents.

Made of glass, style F won’t leach chemicals into contents—even if exposed to heat—so you can store them for extended periods of time.

Spray liquids around your food processing plant while reducing the risk of contaminating the food. These spray bottles have metal additives in the spray head and on the label that can be picked up by a metal detector if the bottles—or any piece of the spray head or label—fall into your line. The spray head is also bright blue, so it’s easy to spot. Use these bottles to help you comply with Hazard Analysis and Critical Control Point (HACCP) programs for food safety.

An adjustable nozzle lets you pick the spray that’s right for your job, from a mist to a stream. The trigger has a three-finger grip for comfort and less fatigue during extended use. The label has a checklist and write-on area for easy identification of contents.

They cannot be sold to the listed areas due to local product labeling requirements.

Spray at any angle—even upside down.

No funnel needed to fill these bottles—a wide mouth allows quick refilling without spilling. They have a high-output trigger sprayer that dispenses up to three times more liquid per stroke than other spray bottles.

Dispense up to three times more liquid per stroke than other spray bottles.

These spray bottles resist harsh chemicals. They have a fluoroelastomer seal that can be used with most chemicals. A filter at the base of the tube prevents clogs.

Polyethylene spray bottles have a high-output trigger that delivers two sprays with every squeeze—one when you squeeze and one when you release.

HDPE spray bottles have up to 40% greater output per stroke, significantly reducing the number of times you pull the trigger and a high output with an extra-large spray pattern make quick work of any job.

Access tight spaces with the 36" long tube that extends from this spray bottle.