System of Measurement System of Measurement |
---|
|
Diameter Diameter | Show |
---|
|
Diameter Diameter | Hide |
---|
Material Material |
---|
|
Mechanical Finish Mechanical Finish |
---|
|
Keyway Width Keyway Width |
---|
|
Edge Type Edge Type |
---|
![]() | Chamfered |
Hardness Rating Hardness Rating |
---|
|
|
For Motion Type For Motion Type |
---|
![]() | Rotary |
Yield Strength Yield Strength |
---|
|
Keyway Depth Keyway Depth |
---|
|
More
Combine these shafts with a machine key (not included) to transmit torque to gears, sprockets, and other power transmission components. All have an ANSI standard keyway (keys not included; see our selection of key stock). Their edges are chamfered to remove sharp corners, reducing damage to bearings, housings, and other components during installation. All are turned, ground, and polished to tight diameter and straightness tolerances.
Steel shafts are generally stronger than aluminum and stainless steel shafts but not as corrosion resistant. 1045 carbon steel shafts balance high strength and good machinability, making them ideal for general purpose use.
For technical drawings and 3-D models, click on a part number.
Keyway | ||||||||
---|---|---|---|---|---|---|---|---|
Lg. | Lg. | Wd. | Dp. | ANSI Keys Included | Edge Type | Yield Strength, psi | Each | |
Inch—1045 Carbon Steel (Rockwell B95) | ||||||||
1 15/16" Dia. | ||||||||
3" | 3" | 0.5" | 0.25" | No | Chamfered | 75,000 | 00000000 | 000000 |
6" | 6" | 0.5" | 0.25" | No | Chamfered | 75,000 | 00000000 | 00000 |
9" | 9" | 0.5" | 0.25" | No | Chamfered | 75,000 | 00000000 | 00000 |
12" | 12" | 0.5" | 0.25" | No | Chamfered | 75,000 | 00000000 | 00000 |
18" | 18" | 0.5" | 0.25" | No | Chamfered | 75,000 | 00000000 | 00000 |
24" | 24" | 0.5" | 0.25" | No | Chamfered | 75,000 | 00000000 | 00000 |
36" | 36" | 0.5" | 0.25" | No | Chamfered | 75,000 | 00000000 | 000000 |
48" | 48" | 0.5" | 0.25" | No | Chamfered | 75,000 | 00000000 | 000000 |
60" | 60" | 0.5" | 0.25" | No | Chamfered | 75,000 | 00000000 | 000000 |
72" | 72" | 0.5" | 0.25" | No | Chamfered | 75,000 | 00000000 | 000000 |
These shafts have keyways only on the ends, leaving a plain shaft in the center. The keyways work with the included ANSI machine keys to transmit torque to gears, sprockets, and other keyed components. Use the middle of the shaft with bearings and other round-bore components. The edges are chamfered to remove sharp corners, reducing damage to bearings, housings, and other components during installation. All are turned, ground, and polished to meet tight diameter and straightness tolerances.
1045 carbon steel shafts are stronger than 303 stainless steel shafts. They have excellent machinability, so you can easily cut your own lengths.
For technical drawings and 3-D models, click on a part number.
Lg. | Keyway Lgs. | ANSI Keys Included | Dia. Tolerance | Lg. Tolerance | Straightness Tolerance | Edge Type | Hardness Rating | Hardness | Yield Strength, psi | Each | |
Inch—1045 Carbon Steel | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
1 15/16" Dia. (Keyway: 1/2" Wd. × 1/4" Dp.) | |||||||||||
24" | 4", 14" | One 2" Long Key, One 4" Long Key | -0.002" to 0" | 0" to 0.125" | 0.003" per ft. | Chamfered | Medium | Brinell 190 | 75,000 | 00000000 | 0000000 |
60" | 4", 14" | One 2" Long Key, One 4" Long Key | -0.002" to 0" | 0" to 0.125" | 0.003" per ft. | Chamfered | Medium | Brinell 190 | 75,000 | 00000000 | 000000 |
72" | 4", 14" | One 2" Long Key, One 4" Long Key | -0.002" to 0" | 0" to 0.125" | 0.003" per ft. | Chamfered | Medium | Brinell 190 | 75,000 | 00000000 | 000000 |
Inch—1117 Carbon Steel | |||||||||||
1 15/16" Dia. (Keyway: 1/2" Wd. × 1/4" Dp.) | |||||||||||
36" | 4", 14" | One 2" Long Key, One 4" Long Key | -0.003" to 0" | -0.125" to 0.125" | 0.01" per ft. | Chamfered | Medium | Brinell 156 | 58,000 | 0000000 | 000000 |
48" | 4", 14" | One 2" Long Key, One 4" Long Key | -0.003" to 0" | -0.125" to 0.125" | 0.01" per ft. | Chamfered | Medium | Brinell 156 | 58,000 | 0000000 | 000000 |
Steel shafts are generally stronger than aluminum and stainless steel shafts but not as corrosion resistant.
For technical drawings and 3-D models, click on a part number.