System of Measurement System of Measurement |
|---|
|
Diameter Diameter | Show |
|---|
|
Diameter Diameter | Hide |
|---|
Material Material |
|---|
|
End Type End Type |
|---|
 | Keyed |
Mechanical Finish Mechanical Finish |
|---|
|
Keyway Width Keyway Width |
|---|
|
For Motion Type For Motion Type |
|---|
 | Rotary |
Edge Type Edge Type |
|---|
 | Chamfered |
Keyway Depth Keyway Depth |
|---|
|
Yield Strength Yield Strength |
|---|
|
Hardness Rating Hardness Rating |
|---|
|
About Shafts
More
Keyed Rotary Shafts
Combine these shafts with a machine key (not included) to transmit torque to gears, sprockets, and other power transmission components. All have an ANSI standard keyway (keys not included; see our selection of key stock). Their edges are chamfered to remove sharp corners, reducing damage to bearings, housings, and other components during installation. All are turned, ground, and polished to tight diameter and straightness tolerances.
Steel shafts are generally stronger than aluminum and stainless steel shafts but not as corrosion resistant. 1045 carbon steel shafts balance high strength and good machinability, making them ideal for general purpose use. Stainless steel shafts are more corrosion resistant than steel shafts but also more difficult to machine. 303 and 304 stainless steel shafts have good corrosion resistance. 303 stainless steel shafts are annealed, which makes them softer than 304 stainless steel shafts but more corrosion resistant. 316 stainless steel shafts have excellent corrosion resistance.
For technical drawings and 3-D models, click on a part number.
Keyway | ||||||||
|---|---|---|---|---|---|---|---|---|
| Lg. | Lg. | Wd. | Dp. | ANSI Keys Included | Edge Type | Yield Strength, psi | Each | |
Inch—1045 Carbon Steel (Rockwell B95) | ||||||||
2 3/16" Dia. | ||||||||
| 3" | 3" | 0.5" | 0.25" | No | Chamfered | 75,000 | 00000000 | 000000 |
| 6" | 6" | 0.5" | 0.25" | No | Chamfered | 75,000 | 00000000 | 00000 |
| 9" | 9" | 0.5" | 0.25" | No | Chamfered | 75,000 | 00000000 | 00000 |
| 12" | 12" | 0.5" | 0.25" | No | Chamfered | 75,000 | 00000000 | 00000 |
| 18" | 18" | 0.5" | 0.25" | No | Chamfered | 75,000 | 00000000 | 00000 |
| 24" | 24" | 0.5" | 0.25" | No | Chamfered | 75,000 | 00000000 | 000000 |
| 36" | 36" | 0.5" | 0.25" | No | Chamfered | 75,000 | 00000000 | 000000 |
| 48" | 48" | 0.5" | 0.25" | No | Chamfered | 75,000 | 00000000 | 000000 |
| 60" | 60" | 0.5" | 0.25" | No | Chamfered | 75,000 | 00000000 | 000000 |
| 72" | 72" | 0.5" | 0.25" | No | Chamfered | 75,000 | 00000000 | 000000 |
Inch—304 Stainless Steel (Rockwell B85) | ||||||||
2 3/16" Dia. | ||||||||
| 3" | 3" | 0.5" | 0.25" | No | Chamfered | 30,000 | 0000000 | 00000 |
| 6" | 6" | 0.5" | 0.25" | No | Chamfered | 30,000 | 0000000 | 00000 |
| 9" | 9" | 0.5" | 0.25" | No | Chamfered | 30,000 | 0000000 | 00000 |
| 12" | 12" | 0.5" | 0.25" | No | Chamfered | 30,000 | 0000000 | 000000 |
| 24" | 24" | 0.5" | 0.25" | No | Chamfered | 30,000 | 0000000 | 000000 |
| 36" | 36" | 0.5" | 0.25" | No | Chamfered | 30,000 | 0000000 | 000000 |
| 48" | 48" | 0.5" | 0.25" | No | Chamfered | 30,000 | 0000000 | 000000 |
| 60" | 60" | 0.5" | 0.25" | No | Chamfered | 30,000 | 0000000 | 000000 |
| 72" | 72" | 0.5" | 0.25" | No | Chamfered | 30,000 | 0000000 | 000000 |
Inch—316 Stainless Steel (Rockwell B85) | ||||||||
2 3/16" Dia. | ||||||||
| 3" | 3" | 0.5" | 0.25" | No | Chamfered | 30,000 | 0000000 | 00000 |
| 6" | 6" | 0.5" | 0.25" | No | Chamfered | 30,000 | 0000000 | 00000 |
| 9" | 9" | 0.5" | 0.25" | No | Chamfered | 30,000 | 0000000 | 000000 |
| 12" | 12" | 0.5" | 0.25" | No | Chamfered | 30,000 | 0000000 | 000000 |
| 24" | 24" | 0.5" | 0.25" | No | Chamfered | 30,000 | 0000000 | 000000 |
| 36" | 36" | 0.5" | 0.25" | No | Chamfered | 30,000 | 0000000 | 000000 |
| 48" | 48" | 0.5" | 0.25" | No | Chamfered | 30,000 | 0000000 | 000000 |
| 60" | 60" | 0.5" | 0.25" | No | Chamfered | 30,000 | 0000000 | 000000 |
| 72" | 72" | 0.5" | 0.25" | No | Chamfered | 30,000 | 0000000 | 000000 |