Ball-End Hex L-Keys | McMaster-Carr

Filter by

Drive Size

System of Measurement

Sold As

Driver Style

Color

Finish

Ball Location

Long Leg Length

Number of Pieces

Maximum Access Angle

Overall Length

Short Leg Length

Material

Container Type

Compartmented Plastic Box

Metal Case

Plastic Caddy

Plastic Roll-Up Pouch

Performance

Grip Style

REACH

RoHS

DFARS Specialty Metals

Exempt

Number of Sizes

Export Control Classification Number (ECCN)

Handle Material

Handle Length

289 Products

Sold As

Set

Keep a selection of sizes on hand

48 products

Relative Length

Stubby

An extra-short leg squeezes into spots with low overhead clearance

102 products

Performance

Screw Holding

Grip screws securely so you can fasten with one hand

25 products

Tight Clearance

Bend around obstacles to access screws in hard-to-reach spots

102 products

Easy-Align Ball-Tip L-Keys

Turn screws at an angle when you can't access them head on. These L-keys have a ball tip on the long leg that engages the drive with less contact than a straight tip. They're handy for corners and tightly-packed areas, such as control panels and junction boxes. However, ball tips don't grip as tightly as straight tips and may strip the drive of the fastener if you crank them too hard. These L-keys are precision manufactured to tight tolerances. Made of high-quality hardened steel or stainless steel, they'll last a lifetime in your tool kit.

Black-Oxide Steel—The dark, matte coating withstands occasional moisture.

Gold-Plated Steel—The 14-Karat gold finish resists corrosion better than black oxide to withstand rust in most wet and outdoor applications. However, gold is not as hard as other finishes, so it may wear off over time.

Black Phosphate-Coated Steel—Paint adheres evenly to the surface of these L-keys, so you can add your own finish. The dark, matte coating resists rust in most wet and outdoor applications. However, it won't hold up to salt water and chemicals.

Stainless Steel—With solid stainless steel construction, these L-keys have no coating that could flake off and damage the screw drive. They resist salt water and chemicals better than most of our steel L-keys, but are not quite as strong.

		Length
	Drive Size	Overall	Long Leg	Short Leg	Max. Access Angle		Each
Hex





				Black-Oxide Steel

				5/64"	4 1/8"	4"	5/8"	20°	57185A43	00000
				3/32"	4 9/16"	4 7/16"	3/4"	20°	57185A11	0000
				7/64"	4 7/8"	4 3/4"	3/4"	20°	57185A44	0000
				1/8"	5 1/8"	5"	13/16"	20°	57185A12	0000
				9/64"	5 3/8"	5 3/16"	15/16"	20°	57185A45	0000
				5/32"	5 11/16"	5 1/2"	1"	20°	57185A13	0000
				3/16"	6 1/2"	6 5/16"	1"	20°	57185A14	0000
				7/32"	7 5/16"	7 1/16"	1 1/16"	20°	57185A15	0000
				1/4"	7 3/4"	7 1/2"	1 5/16"	20°	57185A16	0000
				5/16"	8 1/4"	8"	1 7/16"	20°	57185A17	0000


				3/8"	8 3/4"	8 1/2"	1 1/2"	20°	57185A18	0000
				1.5 mm	3 9/16"	3 1/2"	9/16"	20°	57185A34	0000
				2 mm	4 1/8"	4"	5/8"	20°	57185A21	0000
				2.5 mm	4 9/16"	4 7/16"	3/4"	20°	57185A22	0000
				3 mm	5 1/8"	5"	3/4"	20°	57185A23	0000
				4 mm	5 11/16"	5 1/2"	1"	20°	57185A24	0000
				5 mm	6 9/16"	6 5/16"	1 1/8"	20°	57185A25	0000
				6 mm	7 5/16"	7 1/16"	1 1/4"	20°	57185A26	0000
				8 mm	8 1/2"	8"	1 7/16"	20°	57185A28	0000
				10 mm	9 1/4"	8 3/4"	1 9/16"	20°	57185A31	0000




						Gold-Plated Steel

						0.050"	2 7/8"	2 13/16"	9/16"	25°	7813A21	0000
						1/16"	3 1/16"	3"	9/16"	25°	7813A22	0000
						5/64"	3 3/8"	3 1/4"	5/8"	25°	7813A23	0000
						3/32"	3 9/16"	3 7/16"	11/16"	25°	7813A24	0000
						7/64"	3 3/4"	3 5/8"	3/4"	25°	7813A25	0000
						1/8"	3 15/16"	3 13/16"	3/4"	25°	7813A26	0000
						9/64"	4 3/16"	4"	13/16"	25°	7813A27	0000
						5/32"	4 7/16"	4 1/4"	7/8"	25°	7813A28	0000
						3/16"	4 11/16"	4 1/2"	1"	25°	7813A29	0000
						7/32"	5 3/16"	4 15/16"	1 1/16"	25°	7813A31	0000


						1/4"	5 7/8"	5 5/8"	1 3/16"	25°	7813A32	0000
						5/16"	6 5/16"	6"	1 1/4"	25°	7813A33	0000
						3/8"	7 3/16"	6 13/16"	1 7/16"	25°	7813A34	0000
						7/16"	7 15/16"	7 1/2"	1 1/2"	25°	7813A35	00000
						1/2"	8 3/4"	8 1/4"	1 11/16"	25°	7813A36	00000
						1.27 mm	2 7/8"	2 13/16"	9/16"	25°	7813A41	0000
						1.5 mm	3 1/16"	3"	9/16"	25°	7813A42	0000
						2 mm	3 3/8"	3 1/4"	5/8"	25°	7813A43	0000
						2.5 mm	3 5/8"	3 1/2"	3/4"	25°	7813A44	0000
						3 mm	4 1/16"	3 15/16"	3/4"	25°	7813A45	0000


						4 mm	4 1/2"	4 5/16"	7/8"	25°	7813A46	0000
						5 mm	5"	4 3/4"	1 1/16"	25°	7813A47	0000
						6 mm	5 3/4"	5 1/2"	1 1/4"	25°	7813A48	0000
						8 mm	6 3/8"	6"	1 7/16"	25°	7813A49	0000
						10 mm	7 3/16"	6 3/4"	1 9/16"	25°	7813A51	0000




		Black Phosphate-Coated Steel

		0.050"	2 7/8"			2 13/16"	9/16"	25°	5503A13	0000
		1/16"	3 1/16"			3"	9/16"	25°	5503A14	0000
		5/64"	3 3/8"			3 1/4"	5/8"	25°	5503A15	0000
		3/32"	3 9/16"			3 7/16"	11/16"	25°	5503A16	0000
		7/64"	3 3/4"			3 5/8"	3/4"	25°	5503A17	0000
		1/8"	3 15/16"			3 13/16"	3/4"	25°	5503A18	0000
		9/64"	4 3/16"			4"	13/16"	25°	5503A19	0000
		5/32"	4 7/16"			4 1/4"	7/8"	25°	5503A21	0000
		3/16"	4 11/16"			4 1/2"	1"	25°	5503A22	0000
		7/32"	5 3/16"			4 15/16"	1 1/16"	25°	5503A23	0000


		1/4"	5 7/8"			5 5/8"	1 3/16"	25°	5503A24	0000
		5/16"	6 5/16"			6"	1 1/4"	25°	5503A25	0000
		3/8"	7 3/16"			6 13/16"	1 7/16"	25°	5503A26	0000
		7/16"	7 15/16"			7 1/2"	1 1/2"	25°	5503A27	00000
		1/2"	8 3/4"			8 1/4"	1 11/16"	25°	5503A28	00000
		9/16"	9 1/2"			9"	1 3/4"	25°	5503A29	00000
		5/8"	10 1/2"			9 3/4"	1 15/16"	25°	5503A31	00000
		3/4"	12"			11 1/4"	2 3/16"	25°	5503A32	00000
		7/8"	13 3/4"			12 3/4"	2 3/8"	25°	5503A33	00000
		1"	15 1/4"			14 1/4"	2 5/8"	25°	5503A34	00000


		1.27 mm	2 7/8"			2 13/16"	9/16"	25°	5503A35	0000
		1.5 mm	3 1/16"			3"	9/16"	25°	5503A36	0000
		2 mm	3 3/8"	3 1/4"		5/8"	25°	5503A37	0000
		2.5 mm	3 5/8"	3 1/2"	3/4"	25°	5503A38	0000
		3 mm	4 1/16"	3 15/16"	3/4"	25°	5503A39	0000
		3.5 mm	4 1/8"	3 15/16"	7/8"	25°	5503A41	0000
		4 mm	4 1/2"	4 5/16"	7/8"	25°	5503A42	0000
		4.5 mm	4 11/16"	4 1/2"	1"	25°	5503A43	0000
		5 mm	5"	4 3/4"	1 1/16"	25°	5503A44	0000
		5.5 mm	5 3/16"	4 15/16"	1 3/16"	25°	5503A45	0000


		6 mm	5 3/4"	5 1/2"	1 1/4"	25°	5503A46	0000
		7 mm	5 13/16"	5 1/2"	1 5/16"	25°	5503A47	0000
		8 mm	6 3/8"	6"	1 7/16"	25°	5503A48	0000
		9 mm	6 5/8"	6 1/4"	1 1/2"	25°	5503A49	0000
		10 mm	7 3/16"	6 3/4"	1 9/16"	25°	5503A51	0000
		11 mm	8 1/2"	7 15/16"	1 11/16"	25°	5503A52	00000
		12 mm	9 1/4"	8 3/4"	1 3/4"	25°	5503A53	00000
		13 mm	10"	9 1/2"	1 7/8"	25°	5503A59	00000
		14 mm	10 3/4"	10 1/4"	2 3/16"	25°	5503A54	00000
		17 mm	11 3/4"	11"	2 7/16"	25°	5503A55	00000


		19 mm	12 1/2"	11 3/4"	2 3/4"	25°	5503A56	00000
		22 mm	14"	13"	3 1/8"	25°	5503A57	00000
		24 mm	15 1/2"	14 1/2"	3 1/2"	25°	5503A58	00000




				Stainless Steel

				3/32"	5 1/16"	4 7/16"	3/4"	20°	5020A33	0000
				7/64"	4 7/8"	4 3/4"	13/16"	20°	5020A34	0000
				1/8"	5"	4 7/8"	7/8"	20°	5020A35	0000
9/64"				5 3/8"	5 3/16"	15/16"	20°	5020A36	0000
5/32"	5 9/16"			5 3/8"	1"	20°	5020A37	0000
3/16"	6 1/4"			6 1/16"	1 1/16"	20°	5020A38	0000
1/4"	7 1/2"			7 1/4"	1 5/16"	20°	5020A41	0000
5/16"	8"			7 11/16"	1 7/16"	20°	5020A42	00000
3/8"	9 1/2"			9"	1 11/16"	20°	5020A43	00000
1.5 mm	3 9/16"			3 1/2"	9/16"	20°	5020A21	0000


2 mm	4 1/8"			4"	5/8"	20°	5020A22	0000
2.5 mm	4 9/16"			4 7/16"	3/4"	20°	5020A23	0000
3 mm	5"			4 7/8"	7/8"	20°	5020A24	0000
4 mm	5 11/16"			5 3/8"	1"	20°	5020A25	0000
5 mm	6 5/16"			6 1/16"	1 1/16"	20°	5020A26	0000
6 mm	7"			6 3/4"	1 1/4"	20°	5020A27	0000
8 mm	8"			7 11/16"	1 7/16"	20°	5020A28	00000
10 mm	9 1/2"			9"	1 11/16"	20°	5020A29	00000

Easy-Align Ball-Tip L-Key Sets


Canvas Pouch	With Plastic Compartmented Box	Metal Case

Plastic Caddy	Plastic Roll-Up Pouch	Rubber Caddy

Turn screws at an angle when you can't access them head on. These L-key sets have a ball tip on the long leg that engages the drive with less contact than a straight tip. Ball tips are handy for corners and tightly-packed areas, such as control panels and junction boxes. However, they don't grip as tightly as straight tips, and may strip the drive of the fastener if you crank them too hard. These L-keys are precision manufactured to tight tolerances. Made from high-quality hardened steel, they'll last a lifetime in your tool kit.

Black-Oxide Steel—The dark, matte coating withstands occasional moisture.

Blue-Painted Steel—These metric-sized L-keys have a distinctive blue color, so you can easily tell them apart from inch L-keys. The coating provides minimal corrosion resistance, so they are best for dry environments.

Zinc-Flake-Coated Steel—The best of both worlds, these L-keys combine the superior strength of steel with the corrosion resistance of 316 stainless steel. Also known as Magni-coated L-keys, they have been tested to extreme standards, including 1,000 hours of salt spray.

	Material	Container Type		Each
Hex





	Long Length

	6	1.5 mm Hex L-Key (3 1/16" O'all Lg.) 2 mm Hex L-Key (3 3/8" O'all Lg.) 2.5 mm Hex L-Key (3 5/8" O'all Lg.) 3 mm Hex L-Key (4 1/16" O'all Lg.) 4 mm Hex L-Key (4 1/2" O'all Lg.) 5 mm Hex L-Key (5" O'all Lg.)	25°	Black Phosphate-Coated Steel	Plastic Caddy	5709A44	00000
	7	1/8" Hex L-Key (3 15/16" O'all Lg.) 3/16" Hex L-Key (4 11/16" O'all Lg.) 3/32" Hex L-Key (3 9/16" O'all Lg.) 5/32" Hex L-Key (4 7/16" O'all Lg.) 5/64" Hex L-Key (3 3/8" O'all Lg.) 7/64" Hex L-Key (3 3/4" O'all Lg.) 9/64" Hex L-Key (4 3/16" O'all Lg.)	25°	Black Phosphate-Coated Steel	Plastic Caddy	5709A51	0000
	8	0.050" Hex L-Key (2 7/8" O'all Lg.) 1/16" Hex L-Key (3 1/16" O'all Lg.) 1/8" Hex L-Key (3 15/16" O'all Lg.) 3/32" Hex L-Key (3 9/16" O'all Lg.) 5/32" Hex L-Key (4 7/16" O'all Lg.) 5/64" Hex L-Key (3 3/8" O'all Lg.) 7/64" Hex L-Key (3 3/4" O'all Lg.) 9/64" Hex L-Key (4 3/16" O'all Lg.)	25°	Black Phosphate-Coated Steel	Plastic Caddy	5709A16	0000
	9	1.5 mm Hex L-Key (3 1/16" O'all Lg.) 2 mm Hex L-Key (3 3/8" O'all Lg.) 2.5 mm Hex L-Key (3 5/8" O'all Lg.) 3 mm Hex L-Key (4 1/16" O'all Lg.) 4 mm Hex L-Key (4 1/2" O'all Lg.) 5 mm Hex L-Key (5" O'all Lg.) 6 mm Hex L-Key (6 1/4" O'all Lg.) 8 mm Hex L-Key (6 3/8" O'all Lg.) 10 mm Hex L-Key (7 3/16" O'all Lg.)	25°	Gold-Plated Steel	Plastic Caddy	7813A13	00000
	9	1.5 mm Hex L-Key (3 1/16" O'all Lg.) 2 mm Hex L-Key (3 3/8" O'all Lg.) 2.5 mm Hex L-Key (3 5/8" O'all Lg.) 3 mm Hex L-Key (4 1/16" O'all Lg.) 4 mm Hex L-Key (4 1/2" O'all Lg.) 5 mm Hex L-Key (5" O'all Lg.) 6 mm Hex L-Key (6 1/4" O'all Lg.) 8 mm Hex L-Key (6 3/8" O'all Lg.) 10 mm Hex L-Key (7 3/16" O'all Lg.)	25°	Black Phosphate-Coated Steel	Plastic Caddy	5709A18	00000
	9	1.5 mm Hex L-Key (3 1/8" O'all Lg.) 2 mm Hex L-Key (3 3/8" O'all Lg.) 2.5 mm Hex L-Key (3 5/8" O'all Lg.) 3 mm Hex L-Key (4" O'all Lg.) 4 mm Hex L-Key (4 1/2" O'all Lg.) 5 mm Hex L-Key (4 7/8" O'all Lg.) 6 mm Hex L-Key (6 1/4" O'all Lg.) 8 mm Hex L-Key (6 3/8" O'all Lg.) 10 mm Hex L-Key (7 1/8" O'all Lg.)	25°	Blue-Painted Steel	Plastic Caddy	5786A2	00000
	10	1/16" Hex L-Key (3 1/16" O'all Lg.) 1/4" Hex L-Key (5 7/8" O'all Lg.) 1/8" Hex L-Key (3 15/16" O'all Lg.) 3/16" Hex L-Key (4 11/16" O'all Lg.) 3/32" Hex L-Key (3 9/16" O'all Lg.) 5/32" Hex L-Key (4 7/16" O'all Lg.) 5/64" Hex L-Key (3 3/8" O'all Lg.) 7/32" Hex L-Key (5 3/16" O'all Lg.) 7/64" Hex L-Key (3 3/4" O'all Lg.) 9/64" Hex L-Key (4 3/16" O'all Lg.)	25°	Black Phosphate-Coated Steel	Plastic Caddy	5709A28	00000
	10	1/16" Hex L-Key (3 9/16" O'all Lg.) 1/4" Hex L-Key (6 3/4" O'all Lg.) 1/8" Hex L-Key (4 9/16" O'all Lg.) 3/16" Hex L-Key (5 1/2" O'all Lg.) 3/32" Hex L-Key (4 1/16" O'all Lg.) 5/32" Hex L-Key (5 1/16" O'all Lg.) 5/64" Hex L-Key (3 13/16" O'all Lg.) 7/32" Hex L-Key (5 5/16" O'all Lg.) 7/64" Hex L-Key (4 5/16" O'all Lg.) 9/64" Hex L-Key (4 3/16" O'all Lg.)	20°	Zinc-Flake-Coated Steel	Plastic Caddy	5888A36	00000
	12	0.050" Hex L-Key (2 7/8" O'all Lg.) 1/16" Hex L-Key (3 1/16" O'all Lg.) 1/4" Hex L-Key (5 7/8" O'all Lg.) 1/8" Hex L-Key (3 15/16" O'all Lg.) 3/16" Hex L-Key (4 11/16" O'all Lg.) 3/32" Hex L-Key (3 13/16" O'all Lg.) 5/16" Hex L-Key (6 5/16" O'all Lg.) 5/32" Hex L-Key (4 7/16" O'all Lg.) 5/64" Hex L-Key (3 3/8" O'all Lg.) 7/32" Hex L-Key (5 3/16" O'all Lg.) 7/64" Hex L-Key (3 3/4" O'all Lg.) 9/64" Hex L-Key (4 3/16" O'all Lg.)	25°	Gold-Plated Steel	Plastic Caddy	7813A11	00000
	13	0.050" Hex L-Key (2 7/8" O'all Lg.) 1/16" Hex L-Key (3 1/16" O'all Lg.) 1/4" Hex L-Key (5 7/8" O'all Lg.) 1/8" Hex L-Key (3 15/16" O'all Lg.) 3/16" Hex L-Key (4 11/16" O'all Lg.) 3/32" Hex L-Key (3 13/16" O'all Lg.) 3/8" Hex L-Key (7 3/16" O'all Lg.) 5/16" Hex L-Key (6 5/16" O'all Lg.) 5/32" Hex L-Key (4 7/16" O'all Lg.) 5/64" Hex L-Key (3 3/8" O'all Lg.) 7/32" Hex L-Key (5 3/16" O'all Lg.) 7/64" Hex L-Key (3 3/4" O'all Lg.) 9/64" Hex L-Key (4 3/16" O'all Lg.)	25°	Gold-Plated Steel	Plastic Caddy	7813A12	00000


	13	0.050" Hex L-Key (2 7/8" O'all Lg.) 1/16" Hex L-Key (3 1/16" O'all Lg.) 1/4" Hex L-Key (5 7/8" O'all Lg.) 1/8" Hex L-Key (3 15/16" O'all Lg.) 3/16" Hex L-Key (4 11/16" O'all Lg.) 3/32" Hex L-Key (3 9/16" O'all Lg.) 3/8" Hex L-Key (7 3/16" O'all Lg.) 5/16" Hex L-Key (6 5/16" O'all Lg.) 5/32" Hex L-Key (4 7/16" O'all Lg.) 5/64" Hex L-Key (3 3/8" O'all Lg.) 7/32" Hex L-Key (5 3/16" O'all Lg.) 7/64" Hex L-Key (3 3/4" O'all Lg.) 9/64" Hex L-Key (4 3/16" O'all Lg.)	25°	Black Phosphate-Coated Steel	Metal Case	5709A14	00000
	13	0.050" Hex L-Key (2 7/8" O'all Lg.) 1/16" Hex L-Key (3 1/16" O'all Lg.) 1/4" Hex L-Key (5 7/8" O'all Lg.) 1/8" Hex L-Key (3 15/16" O'all Lg.) 3/16" Hex L-Key (4 11/16" O'all Lg.) 3/32" Hex L-Key (3 9/16" O'all Lg.) 3/8" Hex L-Key (7 3/16" O'all Lg.) 5/16" Hex L-Key (6 5/16" O'all Lg.) 5/32" Hex L-Key (4 7/16" O'all Lg.) 5/64" Hex L-Key (3 3/8" O'all Lg.) 7/32" Hex L-Key (5 3/16" O'all Lg.) 7/64" Hex L-Key (3 3/4" O'all Lg.) 9/64" Hex L-Key (4 3/16" O'all Lg.)	25°	Black Phosphate-Coated Steel	Plastic Caddy	5709A52	00000
	13	0.050" Hex L-Key (3 3/8" O'all Lg.) 1/16" Hex L-Key (3 9/16" O'all Lg.) 1/4" Hex L-Key (6 3/4" O'all Lg.) 1/8" Hex L-Key (4 9/16" O'all Lg.) 3/16" Hex L-Key (5 1/2" O'all Lg.) 3/32" Hex L-Key (4 1/16" O'all Lg.) 3/8" Hex L-Key (8 1/4" O'all Lg.) 5/16" Hex L-Key (7 1/4" O'all Lg.) 5/32" Hex L-Key (5 1/16" O'all Lg.) 5/64" Hex L-Key (3 13/16" O'all Lg.) 7/32" Hex L-Key (5 15/16" O'all Lg.) 7/64" Hex L-Key (4 5/16" O'all Lg.) 9/64" Hex L-Key (4 13/16" O'all Lg.)	20°	Zinc-Flake-Coated Steel	Plastic Caddy	5888A38	00000
	13	1.27 mm Hex L-Key (2 7/8" O'all Lg.) 1.5 mm Hex L-Key (3 1/16" O'all Lg.) 2 mm Hex L-Key (3 3/8" O'all Lg.) 2.5 mm Hex L-Key (3 5/8" O'all Lg.) 3 mm Hex L-Key (4 1/16" O'all Lg.) 4 mm Hex L-Key (4 1/2" O'all Lg.) 5 mm Hex L-Key (5" O'all Lg.) 6 mm Hex L-Key (6 1/4" O'all Lg.) 8 mm Hex L-Key (6 3/8" O'all Lg.) 10 mm Hex L-Key (7 3/16" O'all Lg.) 12 mm Hex L-Key (9 1/4" O'all Lg.) 14 mm Hex L-Key (10 3/4 O'all Lg.) 17 mm Hex L-Key (11 3/4" O'all Lg.)	25°	Black Phosphate-Coated Steel	Metal Case	5709A22	00000
	15	0.050" Hex L-Key (2 7/8" O'all Lg.) 1/16" Hex L-Key (3 1/16" O'all Lg.) 1/2" Hex L-Key (8 3/4" O'all Lg.) 1/4" Hex L-Key (5 7/8" O'all Lg.) 1/8" Hex L-Key (3 15/16" O'all Lg.) 3/16" Hex L-Key (4 11/16" O'all Lg.) 3/32" Hex L-Key (3 9/16" O'all Lg.) 3/8" Hex L-Key (7 3/16" O'all Lg.) 5/16" Hex L-Key (6 5/16" O'all Lg.) 5/32" Hex L-Key (4 7/16" O'all Lg.) 5/64" Hex L-Key (3 3/8" O'all Lg.) 7/16" Hex L-Key (7 15/16" O'all Lg.) 7/32" Hex L-Key (5 3/16" O'all Lg.) 7/64" Hex L-Key (3 3/4" O'all Lg.) 9/64" Hex L-Key (4 3/16" O'all Lg.)	25°	Black Phosphate-Coated Steel	Plastic Roll-Up Pouch	5709A15	00000
	15	1.27 mm Hex L-Key (2 7/8" O'all Lg.) 1.5 mm Hex L-Key (3 1/8" O'all Lg.) 2 mm Hex L-Key (3 3/8" O'all Lg.) 2.5 mm Hex L-Key (3 5/8" O'all Lg.) 3 mm Hex L-Key (4" O'all Lg.) 3.5 mm Hex L-Key (4 1/8" O'all Lg.) 4 mm Hex L-Key (4 1/2" O'all Lg.) 4.5 mm Hex L-Key (4 3/4" O'all Lg.) 5 mm Hex L-Key (4 7/8" O'all Lg.) 5.5 mm Hex L-Key (5 1/8" O'all Lg.) 6 mm Hex L-Key (6 1/4" O'all Lg.) 7 mm Hex L-Key (5 7/8" O'all Lg.) 8 mm Hex L-Key (6 3/8" O'all Lg.) 9 mm Hex L-Key (6 5/8" O'all Lg.) 10 mm Hex L-Key (7 1/8" O'all Lg.)	25°	Blue-Painted Steel	Plastic Caddy	5786A1	00000
	15	1.27 mm Hex L-Key (2 7/8" O'all Lg.) 1.5 mm Hex L-Key (3 1/16" O'all Lg.) 2 mm Hex L-Key (3 3/8" O'all Lg.) 2.5 mm Hex L-Key (3 5/8" O'all Lg.) 3 mm Hex L-Key (4 1/16" O'all Lg.) 3.5 mm Hex L-Key (4 1/8" O'all Lg.) 4 mm Hex L-Key (4 1/2" O'all Lg.) 4.5 mm Hex L-Key (4 11/16" O'all Lg.) 5 mm Hex L-Key (5" O'all Lg.) 5.5 mm Hex L-Key (5 3/16" O'all Lg.) 6 mm Hex L-Key (6 1/4" O'all Lg.) 7 mm Hex L-Key (5 13/16" O'all Lg.) 8 mm Hex L-Key (6 3/8" O'all Lg.) 9 mm Hex L-Key (6 5/8" O'all Lg.) 10 mm Hex L-Key (7 3/16" O'all Lg.)	25°	Gold-Plated Steel	Plastic Caddy	7813A15	00000
	15	1.27 mm Hex L-Key (2 7/8" O'all Lg.) 1.5 mm Hex L-Key (3 1/16" O'all Lg.) 2 mm Hex L-Key (3 3/8" O'all Lg.) 2.5 mm Hex L-Key (3 5/8" O'all Lg.) 3 mm Hex L-Key (4 1/16" O'all Lg.) 3.5 mm Hex L-Key (4 1/8" O'all Lg.) 4 mm Hex L-Key (4 1/2" O'all Lg.) 4.5 mm Hex L-Key (4 11/16" O'all Lg.) 5 mm Hex L-Key (5" O'all Lg.) 5.5 mm Hex L-Key (5 3/16" O'all Lg.) 6 mm Hex L-Key (6 1/4" O'all Lg.) 7 mm Hex L-Key (5 13/16" O'all Lg.) 8 mm Hex L-Key (6 3/8" O'all Lg.) 9 mm Hex L-Key (6 5/8" O'all Lg.) 10 mm Hex L-Key (7 3/16" O'all Lg.)	25°	Black Phosphate-Coated Steel	Plastic Caddy	5709A45	00000
	200	0.050" Hex L-Key (2 15/16" O'all Lg.)—10 ea. 1.5 mm Hex L-Key (3 1/8" O'all Lg.)—10 ea. 1/16" Hex L-Key (3 1/16" O'all Lg.)—10 ea. 1/4" Hex L-Key (5 1/2" O'all Lg.)—10 ea. 1/8" Hex L-Key (3 15/16" O'all Lg.)—10 ea. 2 mm Hex L-Key (3 5/16" O'all Lg.)—10 ea. 2.5 mm Hex L-Key (3 5/8" O'all Lg.)—10 ea. 3 mm Hex L-Key (4" O'all Lg.)—10 ea. 3/16" Hex L-Key (4 3/4" O'all Lg.)—10 ea. 3/32" Hex L-Key (3 1/2" O'all Lg.)—10 ea. 3/8" Hex L-Key (7 3/16" O'all Lg.)—5 ea. 4 mm Hex L-Key (4 1/4" O'all Lg.)—10 ea. 5 mm Hex L-Key (4 13/16" O'all Lg.)—10 ea. 5/16" Hex L-Key (6 5/16" O'all Lg.)—5 ea. 5/32" Hex L-Key (4 5/16" O'all Lg.)—10 ea. 5/64" Hex L-Key (3 5/16" O'all Lg.)—10 ea. 6 mm Hex L-Key (5 11/16" O'all Lg.)—10 ea. 7/32" Hex L-Key (5 1/8" O'all Lg.)—10 ea. 7/64" Hex L-Key (3 11/16" O'all Lg.)—10 ea. 8 mm Hex L-Key (6 9/16 O'all Lg.)—5 ea. 9/64" Hex L-Key (4 1/8" O'all Lg.)—10 ea. 10 mm Hex L-Key (7" O'all Lg.)—5 ea.	20°	Black-Oxide Steel	Compartmented Plastic Box	6083A7	000000




			Extra-Long Length

			9	1.5 mm Hex L-Key (3 9/16" O'all Lg.) 2 mm Hex L-Key (4 1/8" O'all Lg.) 2.5 mm Hex L-Key (4 9/16" O'all Lg.) 3 mm Hex L-Key (5 1/8" O'all Lg.) 4 mm Hex L-Key (5 11/16" O'all Lg.) 5 mm Hex L-Key (6 9/16" O'all Lg.) 6 mm Hex L-Key (7 5/16" O'all Lg.) 8 mm Hex L-Key (8 1/2" O'all Lg.) 10 mm Hex L-Key (9 1/4" O'all Lg.)	20°	Black-Oxide Steel	Rubber Caddy	57185A33	00000
			9	1.5 mm Hex L-Key (3 9/16" O'all Lg.) 2 mm Hex L-Key (4 1/8" O'all Lg.) 2.5 mm Hex L-Key (4 9/16" O'all Lg.) 3 mm Hex L-Key (5" O'all Lg.) 4 mm Hex L-Key (5 11/16" O'all Lg.) 5 mm Hex L-Key (6 5/16" O'all Lg.) 6 mm Hex L-Key (7" O'all Lg.) 8 mm Hex L-Key (8" O'all Lg.) 10 mm Hex L-Key (9 1/2" O'all Lg.)	20°	Stainless Steel	Rubber Caddy	5020A52	00000
			9	1/4" Hex L-Key (7 1/2" O'all Lg.) 1/8" Hex L-Key (5" O'all Lg.) 3/16" Hex L-Key (6 1/4" O'all Lg.) 3/32" Hex L-Key (5 1/16" O'all Lg.) 3/8" Hex L-Key (9 1/2" O'all Lg.) 5/16" Hex L-Key (8" O'all Lg.) 5/32" Hex L-Key (5 9/16" O'all Lg.) 7/64" Hex L-Key (4 7/8" O'all Lg.) 9/64" Hex L-Key (5 3/8" O'all Lg.)	20°	Stainless Steel	Canvas Pouch	5020A53	00000
			13	0.050" Hex L-Key (3 5/16" O'all Lg.) 1/16" Hex L-Key (3 9/16" O'all Lg.) 1/4" Hex L-Key (7 3/4" O'all Lg.) 1/8" Hex L-Key (5 1/8" O'all Lg.) 3/16" Hex L-Key (6 1/2" O'all Lg.) 3/32" Hex L-Key (4 9/16" O'all Lg.) 3/8" Hex L-Key (8 3/4" O'all Lg.) 5/16" Hex L-Key (8 1/4" O'all Lg.) 5/32" Hex L-Key (5 11/16" O'all Lg.) 5/64" Hex L-Key (4 1/8" O'all Lg.) 7/32" Hex L-Key (7 5/16" O'all Lg.) 7/64" Hex L-Key (4 7/8" O'all Lg.) 9/64" Hex L-Key (5 3/8" O'all Lg.)	20°	Black-Oxide Steel	Rubber Caddy	57185A61	00000

Stubby Easy-Align Ball-Tip L-Keys

Single Ball

Double Ball

Image of Attribute. Front orientation. Contains Annotated, Border. Stubby Easy-Align Ball-Tip L-Keys.

With a stubby leg that's up to 50% shorter than others, these L-keys squeeze into spots with low overhead clearance, such as engine compartments. A ball tip on one or both ends engages the drive with less contact than a straight tip, so you can turn screws at an angle instead of head on. Ball tips don't grip as tightly as straight tips, however, and may strip the drive of the fastener if you crank them too hard.

Chrome-Plated Steel—The chrome plating resists salt water and chemicals better than gold and black phosphate and is less likely to wear off. These L-keys have the brightest, shiniest finish we offer to stand out in your tool box.

		Length			Maximum Access Angle		Single Ball		Double Ball
	Drive Size	Overall	Long Leg	Short Leg	Long Leg	Short Leg		Each		Each
Hex





				Black Phosphate-Coated Steel

				0.050"	2 7/8"	2 13/16"	1/8"	25°	—	7139N11	00000	———	0
				0.050"	3 3/16"	3 1/8"	1/4"	25°	15°	———	0	7139N36	00000
				1/16"	3 1/16"	3"	3/16"	25°	—	7139N12	0000	———	0
				1/16"	3 3/8"	3 5/16"	1/4"	25°	15°	———	0	7139N37	0000
				5/64"	3 1/4"	3 3/16"	1/4"	25°	—	7139N13	0000	———	0
				5/64"	3 11/16"	3 5/8"	5/16"	25°	15°	———	0	7139N38	0000
				3/32"	3 1/2"	3 3/8"	5/16"	25°	—	7139N14	0000	———	0
				3/32"	4"	3 7/8"	3/8"	25°	15°	———	0	7139N39	0000
				7/64"	3 11/16"	3 5/8"	5/16"	25°	—	7139N15	0000	———	0
				7/64"	4 3/16"	4 1/8"	3/8"	25°	15°	———	0	7139N41	0000


				1/8"	3 15/16"	3 13/16"	5/16"	25°	—	7139N16	0000	———	0
				1/8"	4 1/2"	4 3/8"	3/8"	25°	15°	———	0	7139N42	0000
				9/64"	4 1/8"	4"	5/16"	25°	—	7139N17	0000	———	0
				9/64"	4 15/16"	4 13/16"	3/8"	25°	15°	———	0	7139N43	0000
				5/32"	4 3/8"	4 3/16"	3/8"	25°	—	7139N18	0000	———	0
				5/32"	5 1/4"	5 1/8"	3/8"	25°	15°	———	0	7139N44	0000
				3/16"	4 11/16"	4 1/2"	3/8"	25°	—	7139N19	0000	———	0
				3/16"	5 1/2"	5 5/16"	7/16"	25°	15°	———	0	7139N45	0000
				7/32"	5 1/8"	4 7/8"	7/16"	25°	—	7139N21	0000	———	0
				7/32"	5 15/16"	5 11/16"	1/2"	25°	15°	———	0	7139N46	0000


				1/4"	5 7/8"	5 5/8"	7/16"	25°	—	7139N22	0000	———	0
				1/4"	6 3/4"	6 1/2"	1/2"	25°	15°	———	0	7139N47	0000
				5/16"	6 5/16"	6"	9/16"	25°	—	7139N23	0000	———	0
				5/16"	7 7/16"	7 1/8"	5/8"	25°	15°	———	0	7139N48	0000
				3/8"	7 3/16"	6 13/16"	11/16"	25°	—	7139N24	0000	———	0
				3/8"	8 3/16"	7 13/16"	13/16"	25°	15°	———	0	7139N49	0000
				1.27 mm	2 7/8"	2 13/16"	1/8"	25°	—	7139N25	0000	———	0
				1.5 mm	3 1/16"	3"	3/16"	25°	—	7139N26	0000	———	0
				1.5 mm	3 9/16"	3 1/2"	1/4"	25°	15°	———	0	7139N51	0000
				2 mm	3 1/4"	3 3/16"	1/4"	25°	—	7139N27	0000	———	0


				2 mm	4"	3 7/8"	5/16"	25°	15°	———	0	7139N52	0000
				2.5 mm	3 5/8"	3 1/2"	1/4"	25°	—	7139N28	0000	———	0
				2.5 mm	4 1/2"	4 3/8"	3/8"	25°	15°	———	0	7139N53	0000
				3 mm	4"	3 7/8"	5/16"	25°	—	7139N29	0000	———	0
				3 mm	5"	4 7/8"	3/8"	25°	15°	———	0	7139N54	0000
				4 mm	4 7/16"	4 5/16"	3/8"	25°	—	7139N31	0000	———	0
				4 mm	5 3/4"	5 5/8"	3/8"	25°	15°	———	0	7139N55	0000
				5 mm	4 7/8"	4 11/16"	3/8"	25°	—	7139N32	0000	———	0
				5 mm	6 5/8"	6 3/8"	7/16"	25°	15°	———	0	7139N56	0000
				6 mm	5 3/4"	5 1/2"	1/2"	25°	—	7139N33	0000	———	0


				6 mm	7 1/16"	6 13/16"	1/2"	25°	15°	———	0	7139N57	0000
				8 mm	6 5/16"	6"	9/16"	25°	—	7139N34	0000	———	0
				8 mm	8"	7 11/16"	5/8"	25°	15°	———	0	7139N58	0000
				10 mm	7 1/16"	6 11/16"	3/4"	25°	—	7139N35	0000	———	0
				10 mm	8 13/16"	8 3/8"	13/16"	25°	15°	———	0	7139N59	0000




Chrome-Plated Steel

0.050"	2 7/8"					2 13/16"	1/8"	25°	—	7134N111	0000	———	0
0.050"	3 3/16"					3 1/8"	1/4"	25°	15°	———	0	7134N136	0000
1/16"	3 1/16"	3"				3/16"	25°	—	7134N112	0000	———	0
1/16"	3 3/8"	3 5/16"	1/4"			25°	15°	———	0	7134N137	0000
5/64"	3 1/4"	3 3/16"	1/4"			25°	—	7134N113	0000	———	0
5/64"	3 11/16"	3 5/8"	5/16"			25°	15°	———	0	7134N138	0000
3/32"	3 1/2"	3 3/8"	5/16"			25°	—	7134N114	0000	———	0
3/32"	3 15/16"	3 7/8"	3/8"			25°	15°	———	0	7134N139	0000
7/64"	3 11/16"	3 5/8"	5/16"			25°	—	7134N115	0000	———	0
7/64"	4 3/16"	4 1/8"	3/8"			25°	15°	———	0	7134N141	0000


1/8"	3 7/8"	3 13/16"	5/16"			25°	—	7134N116	0000	———	0
1/8"	4 1/2"	4 3/8"	3/8"			25°	15°	———	0	7134N142	0000
9/64"	4 1/8"	4"	5/16"			25°	—	7134N117	0000	———	0
9/64"	4 15/16"	4 13/16"	3/8"			25°	15°	———	0	7134N143	0000
5/32"	4 3/8"	4 3/16"	3/8"			25°	—	7134N118	0000	———	0
5/32"	5 5/16"	5 1/8"	3/8"			25°	15°	———	0	7134N144	0000
3/16"	4 11/16"	4 1/2"	3/8"			25°	—	7134N119	0000	———	0
3/16"	5 7/16"	5 5/16"	7/16"			25°	15°	———	0	7134N145	0000
7/32"	5 1/8"	4 7/8"	7/16"			25°	—	7134N121	0000	———	0
7/32"	5 15/16"	5 11/16"	1/2"			25°	15°	———	0	7134N146	0000


1/4"	5 13/16"	5 5/8"	7/16"			25°	—	7134N122	0000	———	0
1/4"	6 3/4"	6 1/2"	1/2"			25°	15°	———	0	7134N147	0000
5/16"	6 5/16"	6"	9/16"			25°	—	7134N123	0000	———	0
5/16"	7 3/8"	7 1/8"	5/8"			25°	15°	———	0	7134N148	0000
3/8"	7 1/8"	6 13/16"	11/16"			25°	—	7134N124	0000	———	0
3/8"	8 3/16"	7 13/16"	13/16"			25°	15°	———	0	7134N149	0000
1.27 mm	2 7/8"	2 11/16"	1/8"			25°	—	7134N125	0000	———	0
1.5 mm	3 9/16"	3 1/2"	1/4"			25°	15°	———	0	7134N151	0000
1.5 mm	3 5/8"	3 1/2"	3/16"			25°	—	7134N126	0000	———	0
2 mm	4"	3 7/8"	1/4"			25°	—	7134N127	0000	———	0


2 mm	4"	3 7/8"	5/16"			25°	15°	———	0	7134N152	0000
2.5 mm	4 7/16"	4 3/8"	5/16"			25°	15°	———	0	7134N153	0000
2.5 mm	4 1/2"	4 3/8"	1/4"			25°	—	7134N128	0000	———	0
3 mm	4 1/8"	5"	5/16"			25°	—	7134N129	0000	———	0
3 mm	5"	4 7/8"	3/8"			25°	15°	———	0	7134N154	0000
4 mm	5 3/4"	5 5/8"	5/16"			25°	—	7134N131	0000	———	0
4 mm	5 3/4"	5 5/8"	3/8"			25°	15°	———	0	7134N155	0000
5 mm	6 1/2"	6 5/16"	3/8"			25°	—	7134N132	0000	———	0
5 mm	6 1/2"	6 3/8"	7/16"			25°	15°	———	0	7134N156	0000
6 mm	7"	6 13/16"	7/16"			25°	—	7134N133	0000	———	0


6 mm	7"	6 13/16"	1/2"			25°	15°	———	0	7134N157	0000
8 mm	8"	7 11/16"	9/16"			25°	—	7134N134	0000	———	0
8 mm	8"	7 11/16"	5/8"			25°	15°	———	0	7134N158	0000
10 mm	8 3/4"	8 3/8"	3/4"			25°	—	7134N135	0000	———	0
10 mm	8 13/16"	8 3/8"	13/16"			25°	15°	———	0	7134N159	00000

Stubby Easy-Align Ball-Tip L-Key Sets

Fasten a variety of screw sizes in compact machinery where overhead clearance is minimal. These L-keys have a stubby leg that's up to 50% shorter than others to squeeze into extremely tight spaces. They also have a ball tip on one or both ends that engages the drive with less contact than a straight tip, so you can turn screws at an angle instead of head on. Ball tips don't grip as tightly as straight tips, however, and may strip the drive of the fastener if you crank them too hard.

			Maximum Access Angle
	No. of Pieces	Includes	Long Leg	Short Leg	Material	Container Type		Each
Hex





				Long Length

				7	1.5 mm Hex L-Key (3 1/16" O'all Lg.) 2 mm Hex L-Key (3 1/4" O'all Lg.) 2.5 mm Hex L-Key (3 9/16" O'all Lg.) 3 mm Hex L-Key (4" O'all Lg.) 4 mm Hex L-Key (4 1/2" O'all Lg.) 5 mm Hex L-Key (4 7/8" O'all Lg.) 6 mm Hex L-Key (6 1/4" O'all Lg.)	25°	—	Black Phosphate-Coated Steel	Plastic Caddy	6112A21	000000
				9	1.5 mm Hex L-Key (3 1/16" O'all Lg.) 2 mm Hex L-Key (3 1/4" O'all Lg.) 2.5 mm Hex L-Key (3 9/16" O'all Lg.) 3 mm Hex L-Key (4" O'all Lg.) 4 mm Hex L-Key (4 1/2" O'all Lg.) 5 mm Hex L-Key (4 7/8" O'all Lg.) 6 mm Hex L-Key (6 1/4" O'all Lg.) 8 mm Hex L-Key (6 5/16" O'all Lg.) 10 mm Hex L-Key (7 1/8" O'all Lg.)	25°	—	Black Phosphate-Coated Steel	Plastic Caddy	6112A32	00000
				10	1/16" Hex L-Key (3 1/16" O'all Lg.) 1/4" Hex L-Key (5 7/8" O'all Lg.) 1/8" Hex L-Key (3 15/16" O'all Lg.) 3/16" Hex L-Key (4 11/16" O'all Lg.) 3/32" Hex L-Key (3 1/2" O'all Lg.) 5/32" Hex L-Key (4 3/8" O'all Lg.) 5/64" Hex L-Key (3 1/4" O'all Lg.) 7/32" Hex L-Key (5 1/8" O'all Lg.) 7/64" Hex L-Key (3 3/4" O'all Lg.) 9/64" Hex L-Key (4 3/16" O'all Lg.)	25°	—	Black Phosphate-Coated Steel	Plastic Caddy	6112A11	00000
				10	1/16" Hex L-Key (3 1/16" O'all Lg.) 1/4" Hex L-Key (5 7/8" O'all Lg.) 1/8" Hex L-Key (3 15/16" O'all Lg.) 3/16" Hex L-Key (4 11/16" O'all Lg.) 3/32" Hex L-Key (3 9/16" O'all Lg.) 5/32" Hex L-Key (4 7/16" O'all Lg.) 5/64" Hex L-Key (3 3/8" O'all Lg.) 7/32" Hex L-Key (5 3/16" O'all Lg.) 7/64" Hex L-Key (3 3/4" O'all Lg.) 9/64" Hex L-Key (4 3/16" O'all Lg.)	25°	—	Chrome-Plated Steel	Plastic Caddy	90422A110	00000
				13	0.050" Hex L-Key (2 7/8" O'all Lg.) 1/16" Hex L-Key (3 1/16" O'all Lg.) 1/4" Hex L-Key (5 7/8" O'all Lg.) 1/8" Hex L-Key (3 15/16" O'all Lg.) 3/16" Hex L-Key (4 11/16" O'all Lg.) 3/32" Hex L-Key (3 1/2" O'all Lg.) 3/8" Hex L-Key (7 3/16" O'all Lg.) 5/16" Hex L-Key (6 5/16" O'all Lg.) 5/32" Hex L-Key (4 3/8" O'all Lg.) 5/64" Hex L-Key (3 1/4" O'all Lg.) 7/32" Hex L-Key (5 1/8" O'all Lg.) 7/64" Hex L-Key (3 3/4" O'all Lg.) 9/64" Hex L-Key (4 3/16" O'all Lg.)	25°	—	Black Phosphate-Coated Steel	Plastic Caddy	6112A31	00000
				13	0.050" Hex L-Key (2 7/8" O'all Lg.) 1/16" Hex L-Key (3 1/16" O'all Lg.) 1/4" Hex L-Key (5 7/8" O'all Lg.) 1/8" Hex L-Key (3 15/16" O'all Lg.) 3/16" Hex L-Key (4 11/16" O'all Lg.) 3/32" Hex L-Key (3 9/16" O'all Lg.) 3/8" Hex L-Key (7 3/16" O'all Lg.) 5/16" Hex L-Key (6 5/16" O'all Lg.) 5/32" Hex L-Key (4 7/16" O'all Lg.) 5/64" Hex L-Key (3 3/8" O'all Lg.) 7/32" Hex L-Key (5 3/16" O'all Lg.) 7/64" Hex L-Key (3 3/4" O'all Lg.) 9/64" Hex L-Key (4 3/16" O'all Lg.)	25°	—	Chrome-Plated Steel	Plastic Caddy	90422A120	00000




						Extra-Long Length

						7	1.5 mm Hex L-Key (3 1/16" O'all Lg.) 2 mm Hex L-Key (3 3/8" O'all Lg.) 2.5 mm Hex L-Key (3 5/8" O'all Lg.) 3 mm Hex L-Key (4 1/16" O'all Lg.) 4 mm Hex L-Key (4 1/2" O'all Lg.) 5 mm Hex L-Key (5" O'all Lg.) 6 mm Hex L-Key (6 1/4" O'all Lg.)	25°	—	Chrome-Plated Steel	Plastic Caddy	90422A130	00000
						9	1.5 mm Hex L-Key (3 1/16" O'all Lg.) 2 mm Hex L-Key (3 3/8" O'all Lg.) 2.5 mm Hex L-Key (3 5/8" O'all Lg.) 3 mm Hex L-Key (4 1/16" O'all Lg.) 4 mm Hex L-Key (4 1/2" O'all Lg.) 5 mm Hex L-Key (5" O'all Lg.) 6 mm Hex L-Key (6 1/4" O'all Lg.) 8 mm Hex L-Key (6 3/8" O'all Lg.) 10 mm Hex L-Key (7 3/16" O'all Lg.)	25°	—	Chrome-Plated Steel	Plastic Caddy	90422A140	00000




								Extra-Long Length with Double Ball

								9	1.5 mm Hex L-Key (3 5/8" O'all Lg.) 2 mm Hex L-Key (4" O'all Lg.) 2.5 mm Hex L-Key (4 1/2" O'all Lg.) 3 mm Hex L-Key (5 1/8" O'all Lg.) 4 mm Hex L-Key (5 7/8" O'all Lg.) 5 mm Hex L-Key (6 5/8" O'all Lg.) 6 mm Hex L-Key (7" O'all Lg.) 8 mm Hex L-Key (8" O'all Lg.) 10 mm Hex L-Key (9" O'all Lg.)	25°	15°	Black Phosphate-Coated Steel	Plastic Caddy	6112A22	00000
								9	1.5 mm Hex L-Key (3 5/8" O'all Lg.) 2 mm Hex L-Key (4" O'all Lg.) 2.5 mm Hex L-Key (4 1/2" O'all Lg.) 3 mm Hex L-Key (5 1/8" O'all Lg.) 4 mm Hex L-Key (5 11/16" O'all Lg.) 5 mm Hex L-Key (6 5/8" O'all Lg.) 6 mm Hex L-Key (7" O'all Lg.) 8 mm Hex L-Key (8" O'all Lg.) 10 mm Hex L-Key (9" O'all Lg.)	25°	15°	Chrome-Plated Steel	Plastic Caddy	90422A160	00000
								13	0.050" Hex L-Key (2 7/8" O'all Lg.) 1/16" Hex L-Key (3 1/8" O'all Lg.) 1/4" Hex L-Key (5 7/8" O'all Lg.) 1/8" Hex L-Key (4" O'all Lg.) 3/16" Hex L-Key (4 3/4" O'all Lg.) 3/32" Hex L-Key (3 1/2" O'all Lg.) 3/8" Hex L-Key (7 1/4" O'all Lg.) 5/16" Hex L-Key (6 3/8" O'all Lg.) 5/32" Hex L-Key (4 3/8" O'all Lg.) 5/64" Hex L-Key (3 3/8" O'all Lg.) 7/32" Hex L-Key (5 1/8" O'all Lg.) 7/64" Hex L-Key (3 3/4" O'all Lg.) 9/64" Hex L-Key (4 1/4" O'all Lg.)	25°	15°	Chrome-Plated Steel	Plastic Caddy	90422A150	00000
								13	0.050" Hex L-Key (3 1/4" O'all Lg.) 1/16" Hex L-Key (3 3/8" O'all Lg.) 1/4" Hex L-Key (6 3/4" O'all Lg.) 1/8" Hex L-Key (4 5/8" O'all Lg.) 3/16" Hex L-Key (5 1/2" O'all Lg.) 3/32" Hex L-Key (4" O'all Lg.) 3/8" Hex L-Key (8 1/4" O'all Lg.) 5/16" Hex L-Key (7 1/2" O'all Lg.) 5/32" Hex L-Key (5 3/8" O'all Lg.) 5/64" Hex L-Key (3 3/4" O'all Lg.) 7/32" Hex L-Key (6" O'all Lg.) 7/64" Hex L-Key (4 1/4" O'all Lg.) 9/64" Hex L-Key (5" O'all Lg.)	25°	15°	Black Phosphate-Coated Steel	Plastic Caddy	6112A12	00000

Color-Coded Easy-Align Ball-Tip L-Keys

Image of Attribute. Front orientation. Contains Annotated, Border. Easy Align, Ball Tip, L-Key, Sold Individually.

Quickly identify the size you need and start cranking. These L-keys are color-coded by drive size to take the guesswork out of selecting the right one. A ball tip on the long leg engages the drive with less contact than a straight tip, so you can turn screws at an angle instead of head on. Ball tips are handy for corners and tightly-packed areas, however, they don't grip as tightly as straight tips and may strip the drive of the fastener if you crank them too hard.

		Length
	Drive Size	Overall	Long Leg	Short Leg	Max. Access Angle	Color		Each
Hex





				Painted Steel

				0.050"	2 7/8"	2 7/8"	9/16"	25°	Red	2617N11	00000
				1/16"	3 1/8"	3"	9/16"	25°	Yellow	2617N12	0000
				5/64"	3 3/8"	3 3/16"	5/8"	25°	Black	2617N13	0000
				3/32"	3 1/2"	3 7/16"	11/16"	25°	Dark Green	2617N14	0000
				7/64"	3 3/4"	3 5/8"	11/16"	25°	Orange	2617N15	0000
				1/8"	4"	3 7/8"	3/4"	25°	Pink	2617N16	0000
				9/64"	4 1/4"	4"	13/16"	25°	Dark Blue	2617N17	0000
				5/32"	4 3/8"	4 3/16"	7/8"	25°	Red	2617N18	0000
				3/16"	4 3/4"	4 1/2"	15/16"	25°	Blue	2617N19	0000
				7/32"	5 1/8"	5"	1 1/16"	25°	Dark Yellow	2617N21	0000


				1/4"	5 7/8"	5 5/8"	1 1/8"	25°	Green	2617N22	0000
				5/16"	6 3/8"	6"	1 1/4"	25°	Brown	2617N23	0000
				3/8"	7 1/4"	6 7/8"	1 3/8"	25°	Dark Blue	2617N24	00000
				1.5 mm	3 5/8"	3 1/2"	9/16"	25°	Yellow	2617N25	0000
				2 mm	4"	4"	5/8"	25°	Black	2617N26	0000
				2.5 mm	4 1/2"	4 7/16"	11/16"	25°	Orange	2617N27	0000
				3 mm	5 1/8"	5"	3/4"	25°	Pink	2617N28	0000
				4 mm	5 3/4"	5 5/8"	7/8"	25°	Red	2617N29	0000
				5 mm	6 1/2"	6 5/16"	1 1/16"	25°	Blue	2617N31	0000
				6 mm	7 1/8"	6 7/8"	1 1/4"	25°	Green	2617N32	0000


				8 mm	8 1/4"	7 3/4"	1 3/8"	25°	Brown	2617N33	0000
				10 mm	9"	8 1/2"	1 9/16"	25°	Dark Blue	2617N34	00000

Color-Coded Easy-Align Ball-Tip L-Key Sets

Each color corresponds to a specific drive size, so you can grab the key you need and get cranking. A ball tip on the long leg engages the drive with less contact than a straight tip to turn screws at an angle instead of head on. Ball tips are handy for corners and tightly-packed areas, however, they don't grip as tightly as straight tips and may strip the drive of the fastener if you crank them too hard.

	Material	Container Type		Each
Hex





	Extra-Long Length

	9	1.5 mm Yellow Hex L-Key (3 5/8" O'all Lg.) 2 mm Black Hex L-Key (4" O'all Lg.) 2.5 mm Orange Hex L-Key (4 1/2 O'all Lg.) 3 mm Pink Hex L-Key (5 1/8" O'all Lg.) 4 mm Red Hex L-Key (5 3/4" O'all Lg.) 5 mm Blue Hex L-Key (6 1/2" O'all Lg.) 6 mm Green Hex L-Key (7 1/8" O'all Lg.) 8 mm Brown Hex L-Key (8 1/4" O'all Lg.) 10 mm Dark Blue Hex L-Key (9" O'all Lg.)	25°	Painted Steel	Plastic Caddy	2617N35	000000
	13	0.050" Red Hex L-Key (2 7/8" O'all Lg.) 1/16" Yellow Hex L-Key (3 1/8" O'all Lg.) 1/4" Green Hex L-Key (5 7/8" O'all Lg.) 1/8" Pink Hex L-Key (4" O'all Lg.) 3/16" Blue Hex L-Key (4 3/4" O'all Lg.) 3/32" Dark Green Hex L-Key (3 1/2" O'all Lg.) 3/8" Dark Blue Hex L-Key (7 1/4" O'all Lg.) 5/16" Brown Hex L-Key (6 3/8" O'all Lg.) 5/32" Red Hex L-Key (4 3/8" O'all Lg.) 5/64" Black Hex L-Key (3 3/8" O'all Lg.) 7/32" Dark Yellow Hex L-Key (5 1/8" O'all Lg.) 7/64" Orange Hex L-Key (3 3/4" O'all Lg.) 9/64" Dark Blue Hex L-Key (4 1/4" O'all Lg.)	25°	Painted Steel	Plastic Caddy	2617N36	00000

Screw-Holding Easy-Align Ball-Tip L-Keys

Ball Detent

Image of Attribute. Front orientation. Contains Annotated, Border. L-Key, Ball Tip, Sold Individually, Easy Align.

Turn screws in hard-to-reach places with just one hand. The ball tip has a detent that grips screws securely to prevent them from falling off as you fasten. The ball tip also engages the drive at an angle to squeeze into tight spots.

		Length
	Drive Size	Overall	Long Leg	Short Leg	Max. Access Angle	Screw-Holding Mechanism		Each
Hex





				Black Phosphate-Coated Steel

				0.050"	2 7/8"	2 13/16"	1/2"	25°	Ball Detent	6450A59	00000
				1/16"	3 1/8"	3"	9/16"	25°	Ball Detent	6450A61	0000
				5/64"	3 1/4"	3 3/16"	5/8"	25°	Ball Detent	6450A62	0000
				3/32"	3 1/2"	3 3/8"	5/8"	25°	Ball Detent	6450A63	0000
				7/64"	3 3/4"	3 5/8"	11/16"	25°	Ball Detent	6450A64	0000
				1/8"	3 7/8"	3 13/16"	3/4"	25°	Ball Detent	6450A51	0000
				9/64"	4 1/8"	4"	13/16"	25°	Ball Detent	6450A52	0000
				5/32"	4 3/8"	4 3/16"	13/16"	25°	Ball Detent	6450A53	0000
				3/16"	4 3/4"	4 1/2"	15/16"	25°	Ball Detent	6450A54	0000
				7/32"	5 1/8"	4 7/8"	1"	25°	Ball Detent	6450A55	0000


				1/4"	5 7/8"	5 5/8"	1 1/8"	25°	Ball Detent	6450A56	0000
				5/16"	6 3/8"	6"	1 1/4"	25°	Ball Detent	6450A57	0000
				3/8"	7 1/8"	6 13/16"	1 3/8"	25°	Ball Detent	6450A58	0000
				1.27 mm	2 7/8"	2 13/16"	1/2"	25°	Ball Detent	6450A65	0000
				1.5 mm	3 1/8"	3"	1/2"	25°	Ball Detent	6450A66	0000
				2 mm	3 1/4"	3 3/16"	5/8"	25°	Ball Detent	6450A67	0000
				2.5 mm	3 5/8"	3 1/2"	11/16"	25°	Ball Detent	6450A68	0000
				3 mm	4"	3 7/8"	3/4"	25°	Ball Detent	6450A24	0000
				4 mm	4 1/2"	4 5/16"	7/8"	25°	Ball Detent	6450A25	0000
				5 mm	4 7/8"	4 11/16"	1 1/16"	25°	Ball Detent	6450A26	0000


				6 mm	5 3/4"	5 1/2"	1 1/4"	25°	Ball Detent	6450A27	0000
				8 mm	6 1/4"	6"	1 3/8"	25°	Ball Detent	6450A28	0000
				10 mm	7 1/8"	6 11/16"	1 9/16"	25°	Ball Detent	6450A29	0000

Screw-Holding Easy-Align Ball-Tip L-Key Sets


	Ball Detent

Turn a variety of screws in hard-to-reach places with just one hand. The ball tip has a detent that grips screws securely to prevent them from falling off as you fasten. The ball tip also engages the drive at an angle to squeeze into tight spots.

	Material	Screw-Holding Mechanism	Container Type		Each
Hex





	Long Length

	9	1.5 mm Hex L-Key (3 1/8" O'all Lg.) 2 mm Hex L-Key (3 1/4" O'all Lg.) 2.5 mm Hex L-Key (3 5/8" O'all Lg.) 3 mm Hex L-Key (4" O'all Lg.) 4 mm Hex L-Key (4 1/2" O'all Lg.) 5 mm Hex L-Key (4 7/8" O'all Lg.) 6 mm Hex L-Key (6 1/4" O'all Lg.) 8 mm Hex L-Key (6 3/8" O'all Lg.) 10 mm Hex L-Key (7 1/8" O'all Lg.)	25°	Black Phosphate-Coated Steel	Ball Detent	Plastic Caddy	6450A6	000000
	13	0.050" Hex L-Key (2 7/8" O'all Lg.) 1/16" Hex L-Key (3 1/8" O'all Lg.) 1/4" Hex L-Key (5 7/8" O'all Lg.) 1/8" Hex L-Key (3 7/8" O'all Lg.) 3/16" Hex L-Key (4 3/4" O'all Lg.) 3/32" Hex L-Key (3 1/2" O'all Lg.) 3/8" Hex L-Key (7 1/8" O'all Lg.) 5/16" Hex L-Key (6 3/8" O'all Lg.) 5/32" Hex L-Key (4 3/8" O'all Lg.) 5/64" Hex L-Key (3 1/4" O'all Lg.) 7/32" Hex L-Key (5 1/8" O'all Lg.) 7/64" Hex L-Key (3 3/4" O'all Lg.) 9/64" Hex L-Key (4 1/8" O'all Lg.)	25°	Black Phosphate-Coated Steel	Ball Detent	Plastic Caddy	6450A7	00000

Easy-Align Ball-Tip Fold-Up L-Key Sets


Plain Grip	Ultra Grip	Easy Align

These L-keys turn screws at an angle when you can't access them head on. Fold them into the handle like a Swiss army knife when finished for easy storage and portability.

Ultra Grip— The textured handle adds cushioning and is easy to grip with wet or oily hands.

Black-Oxide Steel—The dark, matte coating withstands occasional moisture.

						Handle
	No. of Sizes	Drive Size	Max. Fold-Out Angle	Max. Access Angle	Material	Lg.	Material		Each
Plain Grip





				Hex

				5	3/16", 7/32", 1/4", 5/16", 3/8"	180°	20°	Black-Oxide Steel	5 1/4"	Steel	5339A21	000000
				5	1.5 mm, 2 mm, 2.5 mm, 3 mm, 4 mm	180°	20°	Black-Oxide Steel	3"	Steel	5339A42	0000
				5	4 mm, 5 mm, 6 mm, 8 mm, 10 mm	180°	20°	Black-Oxide Steel	5 1/4"	Steel	5339A52	00000
				7	1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32"	180°	20°	Black-Oxide Steel	3"	Steel	5339A11	00000
				9	5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4"	180°	20°	Black-Oxide Steel	4 1/4"	Steel	5339A31	00000


				Ultra Grip





								Hex

								5	3/16", 7/32", 1/4", 5/16", 3/8"	180°	20°	Black-Oxide Steel	5 1/2"	Plastic	5206A12	00000
								5	4 mm, 5 mm, 6 mm, 8 mm, 10 mm	180°	20°	Black-Oxide Steel	5 1/2"	Plastic	5206A22	00000
								6	2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm	180°	20°	Black-Oxide Steel	3 3/4"	Plastic	5206A21	00000
								9	5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4"	180°	20°	Black-Oxide Steel	4 7/16"	Plastic	5206A11	00000