Overall Length Overall Length |
|---|
Size Size |
|---|
Shank Type Shank Type |
|---|
 | Quick- Change Hex |
 | Hex |
Individual/Set Individual/Set |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
Container Type Container Type |
|---|
|
Ball-End Hex Bits
When you don't have exact alignment between the fastener and the tool, the ball end allows angled entry to turn screws in hard-to-reach areas.
Hex shank bits (also known as insert bits) are used in hand drivers or with a bit adapter in power tools.
Hex shank bits for power tools have a groove in the shank and fit directly into power tools without an adapter. They offer more reach for recessed holes and less wobble compared to a hex shank bit used with an adapter.
For technical drawings and 3-D models, click on a part number.
| Size | Overall Lg. | Max. Access Angle | Material | Each | |
1/4" Hex Shank Size | |||||
|---|---|---|---|---|---|
| 5/64" | 1" | 25° | Steel | 0000000 | 00000 |
| 3/32" | 1" | 25° | Steel | 0000000 | 0000 |
| 7/64" | 1" | 25° | Steel | 0000000 | 0000 |
| 1/8" | 1" | 25° | Steel | 0000000 | 0000 |
| 9/64" | 1" | 25° | Steel | 0000000 | 0000 |
| 5/32" | 1" | 25° | Steel | 0000000 | 0000 |
| 3/16" | 1" | 25° | Steel | 0000000 | 0000 |
| 7/32" | 1" | 25° | Steel | 0000000 | 0000 |
| 1/4" | 1" | 25° | Steel | 0000000 | 0000 |
| 5/16" | 1 1/2" | 25° | Steel | 0000000 | 0000 |
| 3/8" | 1 1/2" | 25° | Steel | 0000000 | 0000 |
| 1/2" | 1 1/2" | 25° | Steel | 0000000 | 0000 |
| 2 mm | 1" | 25° | Steel | 0000000 | 0000 |
| 2.5 mm | 1" | 25° | Steel | 0000000 | 0000 |
| 3 mm | 1" | 25° | Steel | 0000000 | 0000 |
| 4 mm | 1" | 25° | Steel | 0000000 | 0000 |
| 5 mm | 1" | 25° | Steel | 0000000 | 0000 |
| 6 mm | 1" | 25° | Steel | 0000000 | 0000 |
| 8 mm | 1 1/2" | 25° | Steel | 0000000 | 0000 |
| 10 mm | 1 1/2" | 25° | Steel | 0000000 | 0000 |
| 12 mm | 1 1/2" | 25° | Steel | 0000000 | 0000 |
1/4" Hex Shank Size for Power Tools | |||||
| 5/64" | 3" | 25° | Steel | 0000000 | 0000 |
| 3/32" | 3" | 25° | Steel | 0000000 | 0000 |
| 7/64" | 3" | 25° | Steel | 0000000 | 0000 |
| 1/8" | 3" | 25° | Steel | 0000000 | 0000 |
| 9/64" | 3" | 25° | Steel | 0000000 | 0000 |
| 5/32" | 3" | 25° | Steel | 0000000 | 0000 |
| 3/16" | 3" | 25° | Steel | 0000000 | 0000 |
| 7/32" | 3" | 25° | Steel | 0000000 | 0000 |
| 1/4" | 3" | 25° | Steel | 0000000 | 0000 |
| 5/16" | 3" | 25° | Steel | 0000000 | 0000 |
| 3/8" | 3" | 25° | Steel | 0000000 | 0000 |
| 1/2" | 3" | 25° | Steel | 0000000 | 0000 |
| 2 mm | 3" | 25° | Steel | 0000000 | 0000 |
| 2.5 mm | 3" | 25° | Steel | 0000000 | 0000 |
| 3 mm | 3" | 25° | Steel | 0000000 | 0000 |
| 4 mm | 3" | 25° | Steel | 0000000 | 0000 |
| 5 mm | 3" | 25° | Steel | 0000000 | 0000 |
| 6 mm | 3" | 25° | Steel | 0000000 | 0000 |
| 8 mm | 3" | 25° | Steel | 0000000 | 0000 |
| 10 mm | 3" | 25° | Steel | 0000000 | 0000 |
| 12 mm | 3" | 25° | Steel | 0000000 | 0000 |
Ball-End Screw-Holding Hex Bits
The ball end with retaining ring grips inside the recess to keep screws in place and allows angled entry to drive fasteners in hard-to-reach areas. These bits have a groove in the shank and fit directly into power tools without an adapter. They offer more reach for recessed holes and less wobble compared to a hex shank bit used with an adapter.
For technical drawings and 3-D models, click on a part number.
| Size | Overall Lg. | Max. Access Angle | Material | Each | |
1/4" Hex Shank Size for Power Tools | |||||
|---|---|---|---|---|---|
| 1/8" | 2" | 20° | Steel | 0000000 | 00000 |
| 9/64" | 2" | 20° | Steel | 0000000 | 0000 |
| 5/32" | 2" | 20° | Steel | 0000000 | 0000 |
| 3/16" | 2" | 20° | Steel | 0000000 | 0000 |
| 7/32" | 2" | 20° | Steel | 0000000 | 0000 |
| 1/4" | 2" | 20° | Steel | 0000000 | 0000 |
| 3 mm | 2" | 20° | Steel | 0000000 | 0000 |
| 4 mm | 2" | 20° | Steel | 0000000 | 0000 |
| 5 mm | 2" | 20° | Steel | 0000000 | 0000 |
| 6 mm | 2" | 20° | Steel | 0000000 | 0000 |
Ball-End Torx Bits
When you don't have exact alignment between the fastener and the tool, the ball end allows angled entry to turn screws in hard-to-reach areas. These bits have a groove in the shank and fit directly into power tools without an adapter. They offer more reach for recessed holes and less wobble compared to a hex shank bit used with an adapter.
Ball-End Hex Bit Sets
When you don't have exact alignment between the fastener and the tool, the ball end allows angled entry to turn screws in hard-to-reach areas.
Hex shank bits (also known as insert bits) are used in hand drivers or with a bit adapter in power tools.
Hex shank bits for power tools have a groove in the shank and fit directly into power tools without an adapter. They offer more reach for recessed holes and less wobble compared to a hex shank bit used with an adapter.
For technical drawings and 3-D models, click on a part number.
| Components Included | Bits Included | Max. Access Angle | Material | Container Type | Each | |
1/4" Hex Shank Size | ||||||
|---|---|---|---|---|---|---|
| 9 Bits | Hex: 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm (1" O'all Lg.) Hex: 8 mm, 10 mm, 12 mm (1 1/2" O'all Lg.) | 25° | Steel | Plastic Caddy | 0000000 | 000000 |
| 12 Bits | Hex: 5/16", 3/8", 1/2" (1 1/2" O'all Lg.) Hex: 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4" (1" O'all Lg.) | 25° | Steel | Plastic Caddy | 0000000 | 00000 |
1/4" Hex Shank Size for Power Tools | ||||||
| 9 Bits | Hex: 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm, 8 mm, 10 mm, 12 mm (3" O'all Lg.) | 25° | Steel | __ | 0000000 | 00000 |
| 12 Bits | Hex: 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8", 1/2" (3" O'all Lg.) | 25° | Steel | __ | 0000000 | 00000 |
Ball-End Screw-Holding Hex Bit Sets
The ball end with retaining ring grips inside the recess to keep screws in place and allows angled entry to drive fasteners in hard-to-reach areas. These bits have a groove in the shank to fit directly into power tools.
| Components Included | Bits Included | Max. Access Angle | Screw-Holding Mechanism | Material | Container Type | Each | |
1/4" Hex Shank Size for Power Tools | |||||||
|---|---|---|---|---|---|---|---|
| 10 Bits | Hex (Inch): 1/8", 9/64", 5/32", 3/16", 7/32", 1/4" (2" O'all Lg.) Hex (Metric): 3 mm, 4 mm, 5 mm, 6 mm (2" O'all Lg.) | 20° | Retaining Ring | Steel | Plastic Caddy | 0000000 | 000000 |
Ball-End Driver Shafts
Create your own tool by attaching these shafts to a handle, or use with socket wrenches and power tools. They have a ball end that allows angled entry to make good contact with the recess when a standard-tip shaft can’t.
For technical drawings and 3-D models, click on a part number.
| Size | Overall Lg. | Max. Access Angle | Material | Finish | Each | |
Hex  | ||||||
|---|---|---|---|---|---|---|
| 0.050" | 3 7/16" | 25° | Steel | Black | 0000000 | 00000 |
| 1/16" | 3 1/2" | 25° | Steel | Black | 0000000 | 0000 |
| 5/64" | 3 5/8" | 25° | Steel | Black | 0000000 | 0000 |
| 3/32" | 3 13/16" | 25° | Steel | Black | 0000000 | 0000 |
| 7/64" | 4 5/16" | 25° | Steel | Black | 0000000 | 0000 |
| 1/8" | 4 1/2" | 25° | Steel | Black | 0000000 | 0000 |
| 9/64" | 4 13/16" | 25° | Steel | Black | 0000000 | 0000 |
| 5/32" | 5 1/8" | 25° | Steel | Black | 0000000 | 0000 |
| 3/16" | 5 1/2" | 25° | Steel | Black | 0000000 | 0000 |
| 7/32" | 5 15/16" | 25° | Steel | Black | 0000000 | 0000 |
| 1/4" | 6 3/4" | 25° | Steel | Black | 0000000 | 0000 |
| 5/16" | 7 5/16" | 25° | Steel | Black | 0000000 | 0000 |
| 3/8" | 8 1/4" | 25° | Steel | Black | 0000000 | 0000 |
| 7/16" | 9 1/4" | 25° | Steel | Black | 0000000 | 0000 |
| 1/2" | 10 1/4" | 25° | Steel | Black | 0000000 | 00000 |
| 9/16" | 11" | 25° | Steel | Black | 0000000 | 00000 |
| 5/8" | 11 3/4" | 25° | Steel | Black | 0000000 | 00000 |
| 3/4" | 13 1/2" | 25° | Steel | Black | 0000000 | 00000 |
| 1.27 mm | 3 7/16" | 25° | Steel | Black | 0000000 | 000 |
| 1.5 mm | 3 5/8" | 25° | Steel | Black | 0000000 | 000 |
| 2 mm | 3 13/16" | 25° | Steel | Black | 0000000 | 0000 |
| 2.5 mm | 4 1/4" | 25° | Steel | Black | 0000000 | 0000 |
| 3 mm | 4 5/8" | 25° | Steel | Black | 0000000 | 0000 |
| 3.5 mm | 4 13/16" | 25° | Steel | Black | 0000000 | 0000 |
| 4 mm | 5 1/4" | 25° | Steel | Black | 0000000 | 0000 |
| 4.5 mm | 5 1/2" | 25° | Steel | Black | 0000000 | 0000 |
| 5 mm | 5 13/16" | 25° | Steel | Black | 0000000 | 0000 |
| 5.5 mm | 6 1/8" | 25° | Steel | Black | 0000000 | 0000 |
| 6 mm | 6 3/4" | 25° | Steel | Black | 0000000 | 0000 |
| 7 mm | 7 5/16" | 25° | Steel | Black | 0000000 | 0000 |
| 8 mm | 7 13/16" | 25° | Steel | Black | 0000000 | 0000 |
| 9 mm | 8 1/2" | 25° | Steel | Black | 0000000 | 0000 |
| 10 mm | 9" | 25° | Steel | Black | 0000000 | 0000 |
| 11 mm | 9 3/4" | 25° | Steel | Black | 0000000 | 0000 |
| 12 mm | 10 1/2" | 25° | Steel | Black | 0000000 | 00000 |
| 14 mm | 12 1/2" | 25° | Steel | Black | 0000000 | 00000 |
Ball-End Driver Shaft Sets
These assorted shafts attach to a handle or can be used with socket wrenches and power tools. They have a ball end that allows angled entry to make good contact with the recess when a standard-tip shaft can’t.
For technical drawings and 3-D models, click on a part number.
| Number of Pieces | Includes | Max. Access Angle | Material | Finish | Container Type | Each | |
| 12 | 0.050" Hex Driver Shaft (3 7/16" O'all Lg.) 1/16" Hex Driver Shaft (3 1/2" O'all Lg.) 5/64" Hex Driver Shaft (3 5/8" O'all Lg.) 3/32" Hex Driver Shaft (3 13/16" O'all Lg.) 7/64" Hex Driver Shaft (4 5/16" O'all Lg.) 1/8" Hex Driver Shaft (4 1/2" O'all Lg.) 9/64" Hex Driver Shaft (4 13/16" O'all Lg.) 5/32" Hex Driver Shaft (5 1/8" O'all Lg.) 3/16" Hex Driver Shaft (5 1/2" O'all Lg.) 7/32" Hex Driver Shaft (5 15/16" O'all Lg.) 1/4" Hex Driver Shaft (6 3/4" O'all Lg.) 5/16" Hex Driver Shaft (7 5/16" O'all Lg.) | 25° | Steel | Black | Plastic Pouch | 0000000 | 000000 |