Also known as chrome steel, 52100 is an extremely hard and wear-resistant material. These balls are often used in bearings.

For technical drawings and 3-D models, click on a part number.

Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.

Low-carbon steel offers good machinability with excellent weldability. It's widely used for parts that don’t require high strength, such as spacers.

For technical drawings and 3-D models, click on a part number.

Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.

Tungsten carbide, sometimes called carbide, is harder than Corrosion-Resistant Tungsten with excellent wear resistance. Use it to machine long-lasting tools, such as end mills and inserts.

For technical drawings and 3-D models, click on a part number.

The most formable brass we offer, 260 offers better weldability than 300 series brass but it’s not as machinable. Sometimes called cartridge brass, it's commonly used for ammunition casings, radiator components, and decorative door hardware.

For technical drawings and 3-D models, click on a part number.

Hollow construction reduces weight and allows these balls to float. They’re widely used in bearings and valves. 3003 aluminum stands up to outdoor use, as well as exposure to chemicals. It offers a good combination of strength, formability, and weldability.

For technical drawings and 3-D models, click on a part number.

Able to hold tight tolerances, these balls resist expanding when exposed to heat and moisture. They have a naturally slippery, wear-resistant surface. Use them for bearings and low-load rolling applications. Delrin® acetal resin is also known as acetal homopolymer.

For technical drawings and 3-D models, click on a part number.

Resistant to swelling when exposed to water, these balls are often used in laboratory applications.

For technical drawings and 3-D models, click on a part number.

Use these nylon 6/6 balls as bearings and in sealing applications. They have a slippery surface that reduces wear caused by friction.

For technical drawings and 3-D models, click on a part number.

Offering a nonstick, slippery surface, these PTFE balls are often used as bearings and in ball valves. They offer superior chemical resistance and perform well in extreme temperatures. These balls are also excellent electrical insulators.

For technical drawings and 3-D models, click on a part number.

A lightweight alternative to glass balls, acrylic balls maintain clarity over time. They are scratch and UV resistant, so they stand up to outdoor use better than polycarbonate.

For technical drawings and 3-D models, click on a part number.

Offering excellent impact resistance across a wide temperature range, these polycarbonate balls are only half the weight of glass. This material is comparable to Lexan, Hyzod, Tuffak, and Makrolon.

For technical drawings and 3-D models, click on a part number.

FDA compliant for direct contact with food, these balls are often used to clean screens in vibrating sifters in food, beverage, and other sanitary environments. You can also use them as seals in pumps and check valves. All are made of natural rubber, which is also known as gum rubber and latex rubber.

For technical drawings and 3-D models, click on a part number.

Let these balls bounce inside of vibrating sifters for an effective screen cleaner or use them as seals in pumps and check valves. Neoprene is also called chloroprene. It offers good oil and abrasion resistance.

For technical drawings and 3-D models, click on a part number.

Loosen fine particles from the grip of vibrating-sifter screens with the bounce of rubber balls. Also use them as seals in pumps and check valves. They’re made from FDA-listed materials for use with food and beverage. Neoprene is also known as chloroprene.

For technical drawings and 3-D models, click on a part number.

Use these balls as seals in pumps and check valves or let them bounce inside of vibrating sifters for an effective screen cleaner. Buna-N is also known as nitrile, NBR, and acrylonitrile butadiene. It offers good resistance to petroleum-based oils.

For technical drawings and 3-D models, click on a part number.

Use these balls as seals in pumps and check valves, or let them bounce inside of vibrating sifters as an effective screen cleaner. Silicone, commonly called polysiloxane, offers good resistance to ozone and salt water.

For technical drawings and 3-D models, click on a part number.

Clean screens in vibrating sifters with the bounce of these balls, or use them as seals in pumps and check valves. Also known as FKM, Viton® fluoroelastomer is for use in harsh environments, such as those involving ethylene glycol and isopropyl alcohol.

For technical drawings and 3-D models, click on a part number.

Seal out air and gas in high-temperature and high-wear applications. This ultrahard ceramic can also be used in applications that require superior strength.

For technical drawings and 3-D models, click on a part number.

For technical drawings and 3-D models, click on a part number.