For Wheel Diameter For Wheel Diameter |
---|
For Manufacturer Model Number For ManufacturerModel Number |
---|
|
Manufacturer Model Number Manufacturer Model Number |
---|
Component Component |
---|
|
For Manufacturer For Manufacturer |
---|
|
Maximum Tension Measured Maximum Tension Measured |
---|
|
Component | Manufacturer Model No. | Each | |
For No. 6225/6226 | |||
---|---|---|---|
10-24 × 1/2" Pan Head Torx Screw | 06-82-8864 | 00000000 | 00000 |
Blade Pulley | 28-95-0120 | 00000000 | 00000 |
Blade Pulley Axle | 42-12-0070 | 00000000 | 00000 |
Blade Pulley Sleeve Bearing | 42-40-0580 | 00000000 | 0000 |
Bumper | 42-38-0032 | 00000000 | 0000 |
Cord Set | 22-64-3200 | 00000000 | 00000 |
For No. 6225/6226, 6232-20/6232-21, 6238-20/6238-21 | |||
10-24 × 7/8" Pan Head Torx Screw | 06-82-5574 | 00000000 | 0000 |
Blade Pulley Tire | 45-69-0010 | 00000000 | 00000 |
Pulley Hub Washer | 45-88-7165 | 00000000 | 0000 |
Snap Ring | 34-60-1400 | 00000000 | 0000 |
For No. 6225/6226, 6238-20/6238-21 | |||
Switch | 23-66-2726 | 00000000 | 00000 |
For No. 6232-20/6232-21 | |||
Cord Set | 22-64-0440 | 00000000 | 00000 |
Gearcase Cover Kit | 14-30-0010 | 00000000 | 00000 |
Switch | 23-66-0645 | 00000000 | 00000 |
For No. 6232-20/6232-21, 6238-20/6238-21 | |||
10-24 × 1/2" Pan Head Torx Screw | 06-82-5314 | 00000000 | 0000 |
Blade Guard | 43-54-0085 | 00000000 | 0000 |
Blade Pulley | 28-95-0050 | 00000000 | 00000 |
Blade Pulley Axle | 42-12-0010 | 00000000 | 0000 |
Blade Release Shaft Assembly | 31-52-0066 | 00000000 | 0000 |
Brush Assembly | 22-18-0025 | 00000000 | 0000 |
Bumper | 42-18-0035 | 00000000 | 00000 |
Front Guide Assembly | 42-24-0015 | 00000000 | 00000 |
Front Handle | 31-44-0740 | 00000000 | 0000 |
Rear Guide Assembly | 42-28-0025 | 00000000 | 00000 |
For No. 6238-20/6238-21 | |||
Cord Set | 22-64-0465 | 00000000 | 00000 |
Two ball bearing wheels support band saw blades and accurately guide straight and contoured cuts in more rugged-duty applications than a single wheel guide. They adjust to fit various blade widths and thicknesses and adapt for right- and left-hand mounting near the top or bottom wheel. Mounting holes on the back of each guide fit onto your saw's mounting stud, and set screws lock the guide in place. These guides fit most band saws.
Guides | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Overall | Mounting Stud | Replacement Mounting Studs | Replacement Support Wheels | Replacement Thrust Wheels | ||||||||||
For Wheel Dia. | For Blade Wd. | Ht. | Wd. | Dp. | Dia. | Lg. | Each | Each | Each | Each | ||||
14"-30" | 3/16"-3/4" | 2 3/4" | 2 1/4" | 1 3/4" | 7/16" | 3" | 0000000 | 0000000 | 0000000 | 000000 | 00000000 | 000000 | 00000000 | 000000 |
30"-42" | 1/4"-1 1/2" | 4 1/4" | 3 3/4" | 2" | 3/4" | 4 1/2" | 0000000 | 000000 | 0000000 | 00000 | 00000000 | 00000 | 00000000 | 00000 |
30"-42" | 1/4"-1 1/2" | 4 1/4" | 4" | 3 1/4" | 3/4" | 4 1/2" | 0000000 | 000000 | 0000000 | 00000 | 00000000 | 00000 | 00000000 | 00000 |
Upgrade to dual-wheel support on the blade of your Delta, Jet, or Rikon saw for more accurate straight and contoured cuts. They have a ball-bearing construction for excellent support in high-load operations.
A ball bearing wheel and PTFE rub block support your band saw’s blade for more accurate straight and contoured cuts during general purpose cutting. They adjust to fit various blade widths and thicknesses, and they adapt for right- and left-hand mounting near the top or bottom wheel. Mounting holes on the back of each guide fit onto your saw's mounting stud, and set screws lock the guide in place. These guides fit most band saws.
Guides | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Overall | Mounting Stud | Replacement Mounting Studs | Replacement Support Blocks | Replacement Thrust Wheels | ||||||||||
For Wheel Dia. | For Blade Wd. | Ht. | Wd. | Dp. | Dia. | Lg. | Each | Each | Pair | Each | ||||
14"-20" | 3/16"-3/4" | 2 1/4" | 3" | 1 7/8" | 7/16" | 3" | 0000000 | 000000 | 0000000 | 000000 | 0000000 | 000000 | 00000000 | 000000 |
16"-36" | 3/16"-1 1/4" | 3" | 4" | 2 1/2" | 3/4" | 4 1/2" | 0000000 | 000000 | 0000000 | 00000 | 0000000 | 00000 | 00000000 | 00000 |
30"-42" | 3/16"-1 3/4" | 4" | 4 1/4" | 3" | 3/4" | 4 1/2" | 0000000 | 000000 | 0000000 | 00000 | 0000000 | 00000 | 00000000 | 00000 |
Also known as band saw rubbers, these tires provide a cushion between the blade and wheel to preserve tooth shape by reducing vibration and blade slippage. All are approximately 20% smaller than the compatible wheel diameter listed for a stretched fit. Secure them with adhesive and trim the width with a razor blade.
Polyurethane tires last longer than rubber tires.
For Wheel | ||||
---|---|---|---|---|
Dia. | Wd. | Thick. | Each | |
Rubber | ||||
6" | 5/8" | 1/8" | 0000000 | 000000 |
8" | 3/4" | 1/8" | 0000000 | 00000 |
10" | 3/4" | 1/8" | 0000000 | 00000 |
12" | 1 1/16" | 5/32" | 0000000 | 00000 |
14" | 1 1/16" | 5/32" | 0000000 | 00000 |
16" | 1 5/16" | 5/32" | 0000000 | 00000 |
18" | 1 1/2" | 3/16" | 0000000 | 00000 |
20" | 1 5/8" | 3/16" | 0000000 | 00000 |
24" | 1 3/4" | 3/16" | 0000000 | 00000 |
30" | 2" | 3/16" | 0000000 | 00000 |
32" | 2" | 3/16" | 0000000 | 00000 |
34" | 2 1/8" | 3/16" | 0000000 | 00000 |
36" | 2 1/8" | 3/16" | 0000000 | 00000 |
Polyurethane | ||||
10" | 7/8" | 3/32" | 0000000 | 00000 |
12" | 7/8" | 3/32" | 0000000 | 00000 |
14" | 7/8" | 3/32" | 0000000 | 00000 |
16" | 1 1/2" | 3/32" | 0000000 | 00000 |
18" | 1 1/2" | 3/32" | 0000000 | 00000 |
20" | 1 1/2" | 3/32" | 0000000 | 00000 |
Tire Adhesive | 00000000 | Each | 000000 |
Magnets firmly hold these fences in any position and on any size cast iron table to guide straight cuts with your saw. Engage the magnets with the turn of a knob.
Lg. | Ht. | Material | Includes | Each | |
15" | 3" | Aluminum | Magnets | 0000000 | 0000000 |
Increase safety and visibility. This clear plastic guard attaches to the guide bar on your saw and has a built-in light.
For Wheel Dia. | For Manufacturer | Material | Batteries Included | Battery Size | No. of Batteries Required | Each | |
10"-18" | Atlas, Craftsman, Delta, Delta Rockwell, Grob, Homecraft, J-Line, Monarch, Powermatic, Vega, Walker Turner, Wells, Yates American | Clear Plastic | No | AAA | 3 | 0000000 | 0000000 |
AAA Batteries (Pkg. of 4) | 00000000 | Pkg. | 00000 |
Make sure blades are straight between your guides.
Measures | Each | |
Alignment | 0000000 | 0000000 |
Ensure proper blade tension. This gauge also works with power hacksaws.
Measures | Max. Tension Measured | Each | |
Tension | 4,000 kg/cm2, 60,000 psi | 0000000 | 0000000 |