Material Material |
---|
|
For Use With For Use With |
---|
Length Length |
---|
|
|
|
Buckle Type Buckle Type |
---|
![]() | ![]() |
Clip On with Teeth | Clip On |
![]() | ![]() |
Set Screw | Feed Through |
Seal Material Seal Material |
---|
|
Breaking Strength Breaking Strength |
---|
|
Buckle Material Buckle Material |
---|
|
Specifications Met Specifications Met |
---|
|
Useful Life Useful Life |
---|
|
What's the best way to determine the clamp size you'll need? Simply measure the outside diameter of your hose with the fitting installed. Some clamps accommodate a range of sizes, so be sure the size you need falls in the middle of that range.
More
Designed for both permanent connections and emergency repairs, use these buckles with banding to create your own low-profile hose clamps.
Clip On—Buckles have ears for strong, reliable clamping.
Clip On with Teeth—Buckles have teeth, as well as ears, for extra gripping power.
Set Screw—Buckles are reusable.
Galvanized steel buckles have fair corrosion resistance.
201 stainless steel buckles have good corrosion resistance.
316 stainless steel buckles have excellent corrosion resistance.
For technical drawings and 3-D models, click on a part number.
For Band | |||||
---|---|---|---|---|---|
Wd. | Thick. | Reusable | Pkg. Qty. | Pkg. | |
Clip On | |||||
201 Stainless Steel | |||||
1/4" | 0.02" | No | 1 | 0000000 | 00000 |
1/4" | 0.02" | No | 100 | 0000000 | 00000 |
316 Stainless Steel | |||||
1/4" | 0.02" | No | 1 | 0000000 | 0000 |
1/4" | 0.02" | No | 100 | 0000000 | 000000 |
Clip On with Teeth | |||||
Galvanized Steel | |||||
1/2" | 0.03" | No | 1 | 0000000 | 000 |
1/2" | 0.03" | No | 100 | 0000000 | 00000 |
5/8" | 0.03" | No | 1 | 0000000 | 000 |
5/8" | 0.03" | No | 100 | 0000000 | 00000 |
3/4" | 0.03" | No | 5 | 0000000 | 0000 |
3/4" | 0.03" | No | 100 | 0000000 | 00000 |
201 Stainless Steel | |||||
3/8" | 0.025" | No | 1 | 0000000 | 000 |
3/8" | 0.025" | No | 100 | 0000000 | 00000 |
1/2" | 0.03" | No | 1 | 0000000 | 000 |
1/2" | 0.03" | No | 100 | 0000000 | 00000 |
5/8" | 0.03" | No | 1 | 0000000 | 0000 |
5/8" | 0.03" | No | 100 | 0000000 | 00000 |
3/4" | 0.03" | No | 1 | 0000000 | 0000 |
3/4" | 0.03" | No | 100 | 0000000 | 000000 |
3/4" | 0.044" | No | 1 | 0000000 | 0000 |
3/4" | 0.044" | No | 25 | 0000000 | 00000 |
1" | 0.044" | No | 1 | 0000000 | 0000 |
1" | 0.044" | No | 25 | 0000000 | 00000 |
1 1/4" | 0.044" | No | 1 | 0000000 | 0000 |
1 1/4" | 0.044" | No | 25 | 0000000 | 000000 |
316 Stainless Steel | |||||
3/8" | 0.025" | No | 1 | 0000000 | 0000 |
3/8" | 0.025" | No | 100 | 0000000 | 000000 |
1/2" | 0.03" | No | 1 | 0000000 | 0000 |
1/2" | 0.03" | No | 100 | 0000000 | 000000 |
5/8" | 0.03" | No | 1 | 0000000 | 0000 |
5/8" | 0.03" | No | 100 | 0000000 | 000000 |
3/4" | 0.03" | No | 1 | 0000000 | 0000 |
3/4" | 0.03" | No | 100 | 0000000 | 000000 |
Each | |||||
Set Screw | |||||
201 Stainless Steel | |||||
1/4" | 0.02" | Yes | __ | 0000000 | 0000 |
3/8" | 0.025" | Yes | __ | 0000000 | 0000 |
1/2" | 0.03" | Yes | __ | 0000000 | 0000 |
5/8" | 0.03" | Yes | __ | 0000000 | 0000 |
3/4" | 0.044" | Yes | __ | 0000000 | 0000 |
Keep this banding on hand for both permanent connections and emergency repairs. You'll need an installation tool and a buckle (both sold separately) to create a band clamp. Banding comes in a dispenser carton. It has smooth, rounded edges to protect your hose from cuts.
Galvanized steel banding has fair corrosion resistance.
201 stainless steel banding has good corrosion resistance.
304 stainless steel banding has very good corrosion resistance.
316 stainless steel banding has excellent corrosion resistance.
Note: The breaking strength listed is the maximum tension that can be applied to the banding. For an extra-strong clamp, wrap the banding around twice, threading it through the buckle each time.
For technical drawings and 3-D models, click on a part number.
Band | |||||
---|---|---|---|---|---|
Wd. | Thick. | Breaking Strength, lbs. | Reusable | Each | |
25-ft. Lg. | |||||
201 Stainless Steel | |||||
1/4" | 0.02" | 500 | No | 0000000 | 000000 |
3/8" | 0.025" | 900 | No | 0000000 | 00000 |
1/2" | 0.03" | 1,500 | No | 0000000 | 00000 |
5/8" | 0.03" | 1,800 | No | 0000000 | 00000 |
3/4" | 0.03" | 2,250 | No | 0000000 | 00000 |
316 Stainless Steel | |||||
1/2" | 0.03" | 1,200 | No | 0000000 | 00000 |
3/4" | 0.03" | 1,800 | No | 0000000 | 000000 |
100-ft. Lg. | |||||
Galvanized Steel | |||||
1/2" | 0.03" | 1,125 | No | 0000000 | 00000 |
5/8" | 0.03" | 1,400 | No | 0000000 | 00000 |
3/4" | 0.03" | 1,600 | No | 0000000 | 00000 |
201 Stainless Steel | |||||
1/4" | 0.02" | 500 | No | 0000000 | 00000 |
3/8" | 0.025" | 900 | No | 0000000 | 00000 |
1/2" | 0.03" | 1,500 | No | 0000000 | 000000 |
5/8" | 0.03" | 1,800 | No | 0000000 | 000000 |
3/4" | 0.03" | 2,250 | No | 0000000 | 000000 |
3/4" | 0.044" | 3,300 | No | 0000000 | 000000 |
1" | 0.044" | 4,400 | No | 0000000 | 000000 |
1 1/4" | 0.044" | 5,500 | No | 0000000 | 000000 |
304 Stainless Steel | |||||
3/8" | 0.02" | 600 | No | 0000000 | 00000 |
1/2" | 0.02" | 850 | No | 0000000 | 000000 |
5/8" | 0.02" | 1,000 | No | 0000000 | 000000 |
3/4" | 0.02" | 1,275 | No | 0000000 | 000000 |
316 Stainless Steel | |||||
1/4" | 0.02" | 400 | No | 0000000 | 000000 |
3/8" | 0.025" | 750 | No | 0000000 | 000000 |
1/2" | 0.03" | 1,200 | No | 0000000 | 000000 |
5/8" | 0.03" | 1,500 | No | 0000000 | 000000 |
3/4" | 0.03" | 1,800 | No | 0000000 | 000000 |
200-ft. Lg. | |||||
304 Stainless Steel | |||||
3/8" | 0.02" | 600 | No | 0000000 | 000000 |
1/2" | 0.02" | 850 | No | 0000000 | 000000 |
5/8" | 0.02" | 1,000 | No | 0000000 | 000000 |
3/4" | 0.02" | 1,275 | No | 0000000 | 000000 |
Use a sealer to crimp these seals onto metal strapping to keep it under tension.
Open seals are for use on flat surfaces. They snap onto overlapping strap ends during or after application of tension. Closed seals are for use on irregular surfaces as well as rounded objects. They feed onto strap ends before tension is applied with a tensioner.
Note: To match with compatible metal strapping, choose items with the same strapping material and width or material and strapping group number.
For Strapping Group No. | For Strapping Wd. | Lg. | For Use With | Specifications Met | Pkg. Qty. | Pkg. | |
Open | |||||||
---|---|---|---|---|---|---|---|
Zinc Plated Steel | |||||||
1 | 3/8" | 1" | 302 Stainless Steel Strapping, High-Carbon Steel Strapping, Low-Carbon Steel Strapping | ASTM D3953 | 250 | 0000000 | 000000 |
2, 3 | 1/2" | 1" | 302 Stainless Steel Strapping, High-Carbon Steel Strapping, Low-Carbon Steel Strapping | ASTM D3953 | 250 | 0000000 | 00000 |
4, 5 | 5/8" | 1" | 302 Stainless Steel Strapping, High-Carbon Steel Strapping, Low-Carbon Steel Strapping | ASTM D3953 | 125 | 0000000 | 0000 |
6, 7, 8 | 3/4" | 1" | 302 Stainless Steel Strapping, High-Carbon Steel Strapping, Low-Carbon Steel Strapping | ASTM D3953 | 125 | 0000000 | 0000 |
6, 7, 8 | 3/4" | 1 3/4" | 302 Stainless Steel Strapping, High-Carbon Steel Strapping, Low-Carbon Steel Strapping | ASTM D3953 | 50 | 0000000 | 0000 |
9 | 1 1/4" | 2 3/16" | 302 Stainless Steel Strapping, High-Carbon Steel Strapping, Low-Carbon Steel Strapping | ASTM D3953 | 50 | 00000000 | 00000 |
304 Stainless Steel | |||||||
2, 3 | 1/2" | 1" | 302 Stainless Steel Strapping, High-Carbon Steel Strapping, Low-Carbon Steel Strapping | __ | 25 | 0000000 | 00000 |
Closed | |||||||
Zinc Plated Steel | |||||||
1 | 3/8" | 1" | 302 Stainless Steel Strapping, High-Carbon Steel Strapping, Low-Carbon Steel Strapping | ASTM D3953 | 250 | 0000000 | 00000 |
2, 3 | 1/2" | 1" | 302 Stainless Steel Strapping, High-Carbon Steel Strapping, Low-Carbon Steel Strapping | ASTM D3953 | 250 | 0000000 | 00000 |
4, 5 | 5/8" | 1" | 302 Stainless Steel Strapping, High-Carbon Steel Strapping, Low-Carbon Steel Strapping | ASTM D3953 | 125 | 0000000 | 00000 |
6, 7, 8 | 3/4" | 1" | 302 Stainless Steel Strapping, High-Carbon Steel Strapping, Low-Carbon Steel Strapping | ASTM D3953 | 125 | 0000000 | 00000 |
6, 7, 8 | 3/4" | 1 3/4" | 302 Stainless Steel Strapping, High-Carbon Steel Strapping, Low-Carbon Steel Strapping | ASTM D3953 | 50 | 00000000 | 00000 |
9 | 1 1/4" | 2 3/16" | 302 Stainless Steel Strapping, High-Carbon Steel Strapping, Low-Carbon Steel Strapping | ASTM D3953 | 50 | 00000000 | 00000 |
304 Stainless Steel | |||||||
2, 3 | 1/2" | 1" | 302 Stainless Steel Strapping, High-Carbon Steel Strapping, Low-Carbon Steel Strapping | __ | 25 | 0000000 | 00000 |
6, 7, 8 | 3/4" | 1" | 302 Stainless Steel Strapping, High-Carbon Steel Strapping, Low-Carbon Steel Strapping | __ | 25 | 0000000 | 00000 |
Use these buckles to secure Light Duty Metal Strapping around pipe or packages. They feed onto strap ends before tension is applied with a tensioner.
Note: To match with compatible metal strapping, choose items with the same strapping material and strapping group number.
For technical drawings and 3-D models, click on a part number.
Use this strapping for securing pipe coverings as well as for packaging. Metal strapping is strong and will not stretch when wrapped around objects. The coil is wound like a roll of tape. To install, cut the strapping to your desired length with wire cutters, feed it through a buckle, and tighten.
Aluminum is lightweight and corrosion resistant. Tension it by hand or with a tensioner. 304 stainless steel is more corrosion resistant than aluminum. Use a tensioner to tighten.
Note: To match with compatible strapping accessories, choose items for use with the same material and strapping group number.
For technical drawings and 3-D models, click on a part number.
These buckles are designed to hold plastic strapping tight in low-tension applications. Apply buckles as you tension, either by hand or with a tensioner.
Note: To match with compatible strapping, choose items with the same strapping material and width or material and strapping group number.
For Strapping Group Number | For Strapping Wd. | Lg. | For Use With | Pkg. Qty. | Pkg. | |
Plastic | ||||||
---|---|---|---|---|---|---|
10, 11, 12, 14 | 3/8", 1/2" | 2 1/8" | Bonded Polyester Strapping, Embossed Polypropylene Strapping, Woven Polyester Strapping | 250 | 0000000 | 00000 |
11, 12, 13, 14, 15 | 1/2", 5/8" | 2 3/8" | Bonded Polyester Strapping, Embossed Polypropylene Strapping, Woven Polyester Strapping | 200 | 0000000 | 0000 |
Steel | ||||||
10 | 3/8" | 3/4" | Bonded Polyester Strapping, Embossed Polypropylene Strapping, Woven Polyester Strapping | 250 | 0000000 | 00000 |
11, 12, 14 | 1/2" | 1" | Bonded Polyester Strapping, Embossed Polypropylene Strapping, Woven Polyester Strapping | 250 | 0000000 | 00000 |
13, 15 | 5/8" | 1 1/4" | Bonded Polyester Strapping, Embossed Polypropylene Strapping, Woven Polyester Strapping | 100 | 0000000 | 0000 |
17 | 3/4" | 1 1/4" | Bonded Polyester Strapping, Embossed Polypropylene Strapping, Woven Polyester Strapping | 100 | 0000000 | 0000 |
18 | 5/8" | 1" | Basket Weave Polyester Strapping | 10 | 0000000 | 0000 |
19 | 3/4" | 1 1/4" | Basket Weave Polyester Strapping | 10 | 0000000 | 0000 |
20 | 1 1/4" | 2 1/4" | Basket Weave Polyester Strapping | 10 | 0000000 | 0000 |
Crimp these seals with a sealer to hold strapping in place after pulling it tight with a tensioner.
Serrated seals have teeth for a stronger hold than smooth seals.
Note: To match with compatible strapping, choose items with the same strapping material and width or material and strapping group number.
For Strapping Group Number | For Strapping Wd. | Lg. | For Use With | Specifications Met | Pkg. Qty. | Pkg. | |
Zinc Plated Steel | |||||||
---|---|---|---|---|---|---|---|
Smooth Seals | |||||||
10 | 3/8" | 1 1/4" | Embossed Polypropylene Strapping | ASTM D3950 | 250 | 0000000 | 000000 |
11, 12 | 1/2" | 1 1/4" | Embossed Polypropylene Strapping | ASTM D3950 | 100 | 0000000 | 0000 |
13 | 5/8" | 1 1/4" | Embossed Polypropylene Strapping | ASTM D3950 | 100 | 0000000 | 0000 |
17 | 3/4" | 1 1/4" | Embossed Polypropylene Strapping | ASTM D3950 | 100 | 0000000 | 0000 |
Serrated Seals | |||||||
14 | 1/2" | 1 1/4" | Smooth Polyester Strapping | __ | 100 | 0000000 | 00000 |
15, 16 | 5/8" | 1 1/4" | Smooth Polyester Strapping | __ | 100 | 0000000 | 00000 |
17 | 3/4" | 1 1/4" | Smooth Polyester Strapping | __ | 50 | 0000000 | 00000 |
Create custom-length cable ties for large bundles and heavy materials. Cut the strap and attach a buckle. Use the optional tensioning tool to create more tension than with hand tightening.
Styles A and C have teeth that grip as the strap is pushed through the buckle.
Polypropylene and acetal ties resist moisture and chemicals.
Straps and Buckles | Optional Tensioning Tools | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Style | Lg., ft. | Breaking Strength, lbs. | Useful Life | Wd. | Thick. | Buckle Type | No. of Buckles Included | For Use Outdoors | Specifications Met | Temp. Range, °F | Color | Each | Each | ||
Acetal Plastic | |||||||||||||||
B | 50 | 400 | One-Time Use | 0.50" | 0.06" | Feed Through | 25 | Yes | UL 94HB | -40° to 180° | Black | 0000000 | 000000 | 0000000 | 000000 |
B | 100 | 400 | One-Time Use | 0.50" | 0.06" | Feed Through | 25 | Yes | UL 94HB | -40° to 180° | Black | 0000000 | 00000 | 0000000 | 00000 |
Nylon Plastic | |||||||||||||||
B | 50 | 400 | One-Time Use | 0.50" | 0.06" | Feed Through | 25 | No | UL 94V2 | -40° to 180° | Black | 0000000 | 00000 | 0000000 | 00000 |
B | 100 | 400 | One-Time Use | 0.50" | 0.06" | Feed Through | 25 | No | UL 94V2 | -40° to 180° | Black | 0000000 | 00000 | 0000000 | 00000 |
C | 100 | 960 | Reusable | 0.75" | 0.14" | Feed Through | 100 | No | UL 94V2 | -20° to 260° | Black | 0000000 | 000000 | 0000000 | 000000 |
Straps | Optional Tensioning Tools | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Style | Lg., ft. | Breaking Strength, lbs. | Useful Life | Wd. | Thick. | For Use Outdoors | Specifications Met | Temp. Range, °F | Color | Each | Each | ||
Polypropylene Plastic | |||||||||||||
A | 100 | 150 | Reusable | 0.50" | 0.05" | Yes | __ | -30° to 200° | Off-White | 0000000 | 000000 | 0000000 | 000000 |
A | 100 | 150 | Reusable | 0.50" | 0.05" | Yes | __ | -30° to 200° | Black | 0000000 | 00000 | 0000000 | 00000 |
Acetal Plastic | |||||||||||||
B | 300 | 400 | Reusable | 0.50" | 0.06" | Yes | UL 94HB | -40° to 180° | Black | 0000000 | 000000 | 0000000 | 00000 |
Nylon Plastic | |||||||||||||
B | 300 | 400 | Reusable | 0.50" | 0.06" | No | UL 94V2 | -40° to 180° | Black | 0000000 | 00000 | 0000000 | 00000 |
C | 100 | 960 | Reusable | 0.75" | 0.14" | No | UL 94V2 | -20° to 260° | Black | 0000000 | 000000 | 0000000 | 000000 |
Buckles | Optional Tensioning Tools | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Style | Useful Life | Buckle Type | For Use Outdoors | Specifications Met | Temp. Range, °F | Color | Pkg. Qty. | Pkg. | Each | ||
Polypropylene Plastic | |||||||||||
A | Reusable | Feed Through | Yes | __ | -30° to 200° | Off-White | 25 | 0000000 | 000000 | 0000000 | 000000 |
A | Reusable | Feed Through | Yes | __ | -30° to 200° | Black | 25 | 0000000 | 00000 | 0000000 | 00000 |
Acetal Plastic | |||||||||||
B | One-Time Use | Feed Through | Yes | UL 94HB | -40° to 180° | Black | 25 | 0000000 | 00000 | 0000000 | 00000 |
Nylon Plastic | |||||||||||
B | One-Time Use | Feed Through | No | UL 94V2 | -40° to 180° | Black | 25 | 0000000 | 00000 | 0000000 | 00000 |
C | Reusable | Feed Through | No | UL 94V2 | -20° to 260° | Black | 5 | 0000000 | 00000 | 0000000 | 000000 |
These strong, wide ties are often used as an alternative to metal strapping.
Acetal and PPS ties resist moisture and chemicals.
Lg. | For Max. Bundle Dia. | Breaking Strength, lbs. | Wd. | Thick. | For Use Outdoors | Specifications Met | Temp. Range, °F | Color | Pkg. Qty. | Pkg. | ||
Acetal Plastic | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Extra Wide | ||||||||||||
A | 8" | 2" | 400 | 0.50" | 0.06" | Yes | UL 94HB | -40° to 180° | Black | 10 | 0000000 | 000000 |
A | 11" | 2 3/4" | 400 | 0.50" | 0.06" | Yes | UL 94HB | -40° to 180° | Black | 10 | 0000000 | 00000 |
A | 15" | 4" | 400 | 0.50" | 0.06" | Yes | UL 94HB | -40° to 180° | Black | 5 | 0000000 | 0000 |
A | 33" | 9 5/8" | 400 | 0.50" | 0.06" | Yes | UL 94HB | -40° to 180° | Black | 5 | 0000000 | 00000 |
A | 50" | 15" | 400 | 0.50" | 0.06" | Yes | UL 94HB | -40° to 180° | Black | 5 | 0000000 | 00000 |
A | 6ft. | 18" | 400 | 0.50" | 0.06" | Yes | UL 94HB | -40° to 180° | Black | 5 | 0000000 | 00000 |
Nylon Plastic | ||||||||||||
Extra Wide | ||||||||||||
A | 8" | 2" | 400 | 0.50" | 0.06" | No | UL 94V2 | -40° to 180° | Black | 10 | 0000000 | 0000 |
A | 11" | 2 3/4" | 400 | 0.50" | 0.06" | No | UL 94V2 | -40° to 180° | Black | 10 | 0000000 | 0000 |
A | 15" | 4" | 400 | 0.50" | 0.06" | No | UL 94V2 | -40° to 180° | Black | 5 | 0000000 | 0000 |
A | 33" | 9 5/8" | 400 | 0.50" | 0.06" | No | UL 94V2 | -40° to 180° | Black | 5 | 0000000 | 0000 |
A | 50" | 15" | 400 | 0.50" | 0.06" | No | UL 94V2 | -40° to 180° | Black | 5 | 0000000 | 0000 |
A | 6ft. | 18" | 400 | 0.50" | 0.06" | No | UL 94V2 | -40° to 180° | Black | 5 | 0000000 | 00000 |
A | 10ft. | 37" | 400 | 0.50" | 0.06" | No | UL 94V2 | -40° to 180° | Black | 5 | 0000000 | 00000 |
B | 18" | 4 3/4" | 1,130 | 0.75" | 0.14" | No | UL 94V2 | -20° to 260° | Black | 1 | 000000 | 0000 |
B | 24" | 6 5/8" | 1,130 | 0.75" | 0.14" | No | UL 94V2 | -20° to 260° | Black | 1 | 000000 | 0000 |
B | 30" | 8 1/2" | 1,130 | 0.75" | 0.14" | No | UL 94V2 | -20° to 260° | Black | 1 | 000000 | 0000 |
PPS Plastic | ||||||||||||
Extra Wide | ||||||||||||
B | 24" | 6 5/8" | 1,130 | 0.79" | 0.14" | Yes | UL 94V0 | -20° to 350° | Black | 1 | 0000000 | 00000 |