We will reply to your message within an hour.
More
These silicone O-rings withstand temperatures up to 400° F or 450° F.
When you need an O-ring that’s not an industry standard size, we can make one to fit your requirements. These O-rings withstand temperatures up to 450° F.
Made of Buna-N, these O-rings resist grease, hydraulic oil, and motor oil—plus mild chemicals and water.
Softer than standard Buna-N O-rings for a better seal in low-pressure applications.
These hard O-rings offer better wear resistance than standard Buna-N O-rings.
When you need an O-ring that’s not an industry standard size, we can make one to fit your requirements. These resist grease, hydraulic oils, and motor oil.
With flat edges on all four sides, square-profile O-rings cover more surface than round-profile O-rings for a better seal in static applications, such as hose, pipe, and faucet connections.
These Viton® fluoroelastomer O-rings resist a wide range of chemicals, including benzene, butyl alcohol, and ethylene glycol.
Use these O-rings with metric sanitary fittings, which are sometimes called aseptic fittings. Made of Viton® fluoroelastomer, these O-rings resist a wide range of chemicals, including benzene, butyl alcohol, and ethylene glycol.
These durable O-rings bounce back to shape after repeated compression better than other types of Viton® fluoroelastomer O-rings.
Because one black O-ring looks just like another, these O-rings are brown for easy identification.
Rigid and hard with a slippery surface, these PTFE O-rings resist harsh chemicals, such as acetone, fluorinated solvents, methanol, and boric acid.
Pair these O-rings with metric sanitary fittings, which are commonly known as aseptic fittings. Made of PTFE, they’re rigid with a slippery surface and resist harsh chemicals such as acetone, fluorinated solvents, methanol, and boric acid.
Inherently softer and more compressible than PTFE O-rings, these Kalrez 4079 O-rings have comparable chemical resistance.
When you need an O-ring that’s not an industry standard size, we can make one to fit your requirements.
These O-rings withstand higher temperatures than standard EPDM O-rings.
Use these O-rings with metric sanitary fittings, which are also called aseptic fittings. Made of EPDM, they resist water, steam, ethanol, and ethylene glycol.
To prevent removal, these clamps can only be loosened with a special bit or screwdriver.
Ribbed Buna-N over steel creates a tight seal with the bore, even when mating with a rough surface or in a split housing.
These seals have a metal case that creates a tight seal when mating with smooth surfaces.
Also known as oil seals, use these to retain oil on rotating shafts in motors, pumps, bearings, and gearboxes. A spring secures the lip against the shaft, preventing messy leaks. Press-fit seals into the bore around the shaft.
Also known as grease seals, these are designed to retain thick lubricant at low pressure. They have a light grip on the shaft that creates less friction than spring-loaded seals.
Install these seals faster and with less technical expertise than other mechanical shaft seals that come in two pieces. They come with their seal and seat already assembled.
Made from Buna-N for excellent resistance to oil and grease.
An extended spring on these seals accommodates variations in seal cavity length and pump misalignment.
Stay organized with hooks, bin boxes, shelves, and tool holders that work with T-slotted framing.
Route wires, cables, and tubing along T‐slotted rails.
Slide these clips on DIN rails—often used in equipment cabinet racks—to route and organize cables. Since these clips don’t require adhesive or screws, you can move them anywhere along the rail.