How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
Metal Barbed Hose Fittings for Air and Water
Slide the barbed end into rubber hose and secure with the appropriate clamp or crimp-on hose ferrule.
Brass fittings are softer than other metal fittings, so they’re easier to thread together. Plain brass fittings have good corrosion resistance. Fittings with a threaded end are also known as hose nipples.
Fittings with a 45° flared end are also known as refrigeration and SAE fittings.

- Maximum Pressure: 250 psi @ 72° F
- Temperature Range: -40° to 160° F
- Attachment Type: Use Crimp-On Hose Ferrules, except For 1/2" Hose ID: Use Band-and-Buckle Clamps
- Specifications Met: SAE J476
Metal Push-On Barbed Hose Fittings for Air and Water
Fittings have sharper barbs than standard barbed hose fittings to grip rubber push-on hose with no clamps or ferrules required. The more you pull on the fittings, the tighter the hose will grip.
Brass fittings are softer than other metal fittings, so they’re easier to thread together. They have good corrosion resistance. 316 stainless steel fittings have excellent corrosion resistance, so they’re the best choice for high-humidity environments.
Fittings that swivel until tightened rotate 360° for easy installation.
Fittings with a flared end meet JIC or SAE standards for dimensions. Fittings with a 37° flared end are also known as JIC (Joint Industrial Council) fittings. Fittings with a 45° flared end are also known as refrigeration and SAE fittings. Fittings with a female 37° and 45° flared end have a dual-angle seat that accepts both 37° and 45° flared fittings.
The optional installation tool (sold separately) allows you to connect large quantities of barbed fittings to push-on hose. Use the built-in cutter to squarely cut the hose without fraying. Next, lubricate either the push-on hose, fitting or both. Then, clamp the hose into the tool’s vise and apply light pressure on the handle to drive into the fitting.
Note: To ensure proper connection, the barbed end has to be pushed in all the way, with the hose end concealed by the ring.

- Maximum Pressure: 300 psi @ 72° F
- Temperature Range: -20° to 150° F
- Specifications Met: SAE J512, SAE J514
Adapters | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Ring Stop | Replacement Ring Stops | |||||||||
For Hose ID | For Tube OD | Thread Size | Material | Color | Pkg. Qty. | Pkg. | Pkg. Qty. | Pkg. | ||
Brass | ||||||||||
1/4" | 1/4" | 7/16"-20 | Plastic | Yellow | 5 | 00000000 | 000000 | 25 | 000000000 | 00000 |
1/4" | 3/8" | 9/16"-18 | Plastic | Yellow | 1 | 00000000 | 0000 | 25 | 000000000 | 0000 |
3/8" | 3/8" | 9/16"-18 | Plastic | Yellow | 2 | 00000000 | 0000 | 25 | 000000000 | 0000 |
1/2" | 1/2" | 3/4"-16 | Plastic | Yellow | 2 | 00000000 | 00000 | 25 | 00000000 | 0000 |
3/4" | 3/4" | 1 1/16"-12 | Plastic | Yellow | 1 | 00000000 | 00000 | 25 | 000000000 | 0000 |

- Maximum Pressure: 300 psi @ 72° F
- Temperature Range: -20° to 150° F
- Specifications Met: SAE J512
Adapters | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Ring Stop | Replacement Ring Stops | |||||||||
For Hose ID | For Tube OD | Thread Size | Material | Color | Pkg. Qty. | Pkg. | Pkg. Qty. | Pkg. | ||
Brass | ||||||||||
1/4" | 1/4" | 7/16"-20 | Plastic | Yellow | 5 | 00000000 | 000000 | 25 | 000000000 | 00000 |
1/4" | 5/16" | 1/2"-20 | Plastic | Yellow | 5 | 00000000 | 00000 | 25 | 000000000 | 0000 |
3/8" | 3/8" | 5/8"-18 | Plastic | Yellow | 1 | 00000000 | 0000 | 25 | 000000000 | 0000 |
1/2" | 1/2" | 3/4"-16 | Plastic | Yellow | 2 | 00000000 | 00000 | 25 | 00000000 | 0000 |
3/4" | 3/4" | 1 1/16"-14 | Plastic | Yellow | 1 | 00000000 | 00000 | 25 | 000000000 | 0000 |

- Maximum Pressure: 300 psi @ 72° F
- Temperature Range: -20° to 150° F
- Specifications Met: SAE J514
Adapters | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Ring Stop | Replacement Ring Stops | |||||||||
For Hose ID | For Tube OD | Thread Size | Material | Color | Pkg. Qty. | Pkg. | Pkg. Qty. | Pkg. | ||
316 Stainless Steel | ||||||||||
1/4" | 1/4" | 7/16"-20 | Plastic | Blue | 1 | 00000000 | 000000 | 25 | 000000000 | 00000 |
3/8" | 3/8" | 9/16"-18 | Plastic | Blue | 1 | 00000000 | 00000 | 25 | 000000000 | 0000 |
1/2" | 1/2" | 3/4"-16 | Plastic | Blue | 1 | 00000000 | 00000 | 25 | 00000000 | 0000 |
5/8" | 5/8" | 7/8"-14 | Plastic | Blue | 1 | 00000000 | 000000 | 25 | 00000000 | 0000 |
3/4" | 3/4" | 1 1/16"-12 | Plastic | Blue | 1 | 00000000 | 000000 | 25 | 000000000 | 0000 |

- Maximum Pressure: 300 psi @ 72° F
- Temperature Range: -20° to 150° F
- Specifications Met: SAE J512, SAE J514
Adapters | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Ring Stop | Replacement Ring Stops | |||||||||
For Hose ID | For Tube OD | Thread Size | Material | Color | Pkg. Qty. | Pkg. | Pkg. Qty. | Pkg. | ||
Brass | ||||||||||
1/4" | 1/4" | 7/16"-20 | Plastic | Yellow | 5 | 00000000 | 000000 | 25 | 000000000 | 00000 |
1/4" | 5/16" | 1/2"-20 | Plastic | Yellow | 5 | 00000000 | 00000 | 25 | 000000000 | 0000 |
3/8" | 5/16" | 1/2"-20 | Plastic | Yellow | 1 | 000000000 | 0000 | 25 | 000000000 | 0000 |
3/8" | 1/2" | 3/4"-16 | Plastic | Yellow | 2 | 00000000 | 00000 | 25 | 000000000 | 0000 |
1/2" | 1/2" | 3/4"-16 | Plastic | Yellow | 2 | 00000000 | 00000 | 25 | 00000000 | 0000 |
1/2" | 5/8" | 7/8"-14 | Plastic | Yellow | 2 | 00000000 | 00000 | 25 | 00000000 | 0000 |
5/8" | 5/8" | 7/8"-14 | Plastic | Yellow | 2 | 00000000 | 00000 | 25 | 00000000 | 0000 |
3/4" | 5/8" | 7/8"-14 | Plastic | Yellow | 1 | 000000000 | 00000 | 25 | 000000000 | 0000 |

Mounting Hole | ||||||||
---|---|---|---|---|---|---|---|---|
For Hose ID Range | Lg. | Ht. | Dp. | Dia. | No. of | Mounting Fasteners Included | Each | |
1/4" to 3/4" | 13 1/2" | 7" | 2 3/8" | 5/8" | 4 | No | 00000000 | 0000000 |
Push-On Barbed Hose Fittings for Hydraulic Fluid
These fittings have sharp barbs to grip rubber push-on hose with no clamps or ferrules required. The more you pull on the fittings, the tighter the hose will grip. Use them in low-pressure hydraulic applications up to 350 psi. Also known as hose nipples, they adapt a barbed end to a threaded end, so you can connect to pumps, cylinders, and other equipment in your hydraulic system. Fittings are zinc-plated steel, which has excellent strength and durability. Fittings have fair corrosion resistance.
Fittings that swivel until tightened rotate 360° for easy installation.
Fittings with a 37° flared end are also known as JIC (Joint Industrial Council) fittings.
Note: To ensure proper connection, the barbed end has to be pushed in all the way, with the hose end concealed by the ring.

- Maximum Pressure: See table
- Maximum Vacuum: See Table
- Temperature Range: -40° to 255° F
- For Hose Manufacturer Series: Parker 801
- Specifications Met: See Table
Fittings | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Ring Stop | 10-ft. Hose | |||||||||||
For Hose ID | For Tube OD | Thread Size | Dash Size | Material | Color | Max. Pressure | Max. Vacuum | Manufacturer Series | Each | Each | ||
Zinc-Plated Steel | ||||||||||||
1/4" | 1/4" | 7/16"-20 | 04 | Plastic | Yellow | 350 psi @ 72° F | 28 in. of Hg @ 72° F | Parker 82 | 00000000 | 00000 | 0000000 | 000000 |
3/8" | 3/8" | 9/16"-18 | 06 | Plastic | Yellow | 350 psi @ 72° F | 28 in. of Hg @ 72° F | Parker 82 | 00000000 | 0000 | 0000000 | 00000 |
1/2" | 3/8" | 9/16"-18 | 06 | Plastic | Yellow | 300 psi @ 72° F | 28 in. of Hg @ 72° F | Parker 82 | 00000000 | 0000 | 0000000 | 00000 |
1/2" | 1/2" | 3/4"-16 | 08 | Plastic | Yellow | 300 psi @ 72° F | 28 in. of Hg @ 72° F | Parker 82 | 00000000 | 0000 | 0000000 | 00000 |
Refrigerant Hose Fittings

- Maximum Pressure: 500 psi @ 72° F
- Maximum Vacuum: 28 in. of Hg @ 72° F
- Temperature Range: -40° to 280° F
- Compatible With: Danfoss EZ Clip
- All Fittings Swivel Until Tightened
- Specifications Met: SAE J2064, SAE J3062
- Compatible Hose: Refrigerant Hose
No need for expensive crimping tools—these fittings make air conditioning and refrigeration assemblies with clamps. Instead of a crimper, they use two clamps that you tighten against a cage on your fitting with pliers. Both fitting ends swivel until tightened, so you don't have to rotate the entire hose during installation. The cage and clamps stretch out after use, so they shouldn't be used again.
Straight adapter kits include everything you need to connect one end to aluminum tubing. Braze the fitting to your tube with one of the braze rings. To prevent leaks, slip an O-ring on after the brazed joint cools. To connect these fittings to a hose, you’ll need a cage, clamps, and hose clamp pliers.
Fittings with an O-ring pilot create a leak-tight seal, so they’re often used in commercial and vehicle air conditioning systems. When you screw the fitting onto your tube, the bead and the pilot squeeze the O-ring, which fills in any gaps. The pilot also helps guide your hose onto the fitting, making it easy to properly align and secure the connection.
Fittings with a 45° flared end are also known as SAE fittings.


Dash Size | ||||||||
---|---|---|---|---|---|---|---|---|
For Hose ID | For Hose | Fitting | Thread Size | Bead OD | Pilot Lg. | Includes | Each | |
Zinc-Plated Steel | ||||||||
5/16" | 06 | 06 | 5/8"-18 | 0.52" | 0.19" | 2 Clamps, Cage, O-Ring | 0000000 | 000000 |
13/32" | 08 | 06 | 5/8"-18 | 0.52" | 0.19" | 2 Clamps, Cage, O-Ring | 0000000 | 00000 |
13/32" | 08 | 08 | 3/4"-16 | 0.64" | 0.19" | 2 Clamps, Cage, O-Ring | 0000000 | 00000 |
1/2" | 10 | 08 | 3/4"-16 | 0.64" | 0.19" | 2 Clamps, Cage, O-Ring | 0000000 | 00000 |
1/2" | 10 | 10 | 7/8"-14 | 0.77" | 0.19" | 2 Clamps, Cage, O-Ring | 0000000 | 00000 |
5/8" | 12 | 10 | 7/8"-14 | 0.77" | 0.19" | 2 Clamps, Cage, O-Ring | 0000000 | 00000 |
5/8" | 12 | 12 | 1 1/16"-14 | 0.91" | 0.19" | 2 Clamps, Cage, O-Ring | 0000000 | 00000 |

Dash Size | ||||||
---|---|---|---|---|---|---|
For Hose ID | For Hose | Fitting | For Tube OD, mm | Includes | Each | |
Aluminum | ||||||
5/16" | 06 | 06 | 10 | 3 Nipple O-Rings, 3 Silver Braze Rings | 0000000 | 000000 |
13/32" | 08 | 08 | 12 | 3 Nipple O-Rings, 3 Silver Braze Rings | 0000000 | 00000 |
1/2" | 10 | 10 | 16 | 3 Nipple O-Rings, 3 Silver Braze Rings | 0000000 | 00000 |
5/8" | 12 | 12 | 18 | 3 Nipple O-Rings, 3 Silver Braze Rings | 0000000 | 00000 |





Jaw | |||||||
---|---|---|---|---|---|---|---|
Overall Lg. | Grip Style | Opening Style | Texture | Material | Tip Type | Each | |
Pinch Clamp Pliers—Straight Jaw | |||||||
6 7/8" | Cushion | Spring Assisted | Smooth | Steel | Fixed | 0000000 | 0000000 |


Band | |||||||
---|---|---|---|---|---|---|---|
For Hose ID | Dash Size | Wd. | Thick. | Reusable | Includes | Each | |
304 Stainless Steel Clamps with 301 Stainless Steel Cage | |||||||
Single Pinch | |||||||
5/16" | 06 | 5/16" | 0.024" | No | 2 Clamps, Cage | 0000000 | 00000 |
13/32" | 08 | 5/16" | 0.024" | No | 2 Clamps, Cage | 0000000 | 0000 |
1/2" | 10 | 5/16" | 0.024" | No | 2 Clamps, Cage | 0000000 | 0000 |
5/8" | 12 | 5/16" | 0.024" | No | 2 Clamps, Cage | 0000000 | 0000 |


Band | |||||||||
---|---|---|---|---|---|---|---|---|---|
For Hose ID Range | For OD | Dash Size | Wd. | Thick. | Reusable | Number of Pieces | Includes | Each | |
304 Stainless Steel Clamps with 301 Stainless Steel Cages | |||||||||
Single Pinch | |||||||||
5/16" to 5/8" | 0.6" to 0.99" | 06, 08, 10, 12 | 5/16" | 0.024" | No | 122 | Cages with 5/16" band width for 5/16" hose ID (10 each) Clamps with 5/16" band width, .32" clamp ID (20 each) Cages with 5/16" band width for 13/32" hose ID (10 each) Clamps with 5/16" band width, .42" clamp ID (20 each) Cages with 5/16" band width for 1/2" hose ID (10 each) Clamps with 5/16" band width, .52" clamp ID (20 each) Cages with 5/16" band width for 5/8" hose ID (10 each) Clamps with 5/16" band width, .62" clamp ID (20 each) Pinch Clamp Pliers Hose Cutter | 0000000 | 0000000 |
Stainless Steel Barbed Tube Fittings for Food and Beverage
- Temperature Range: -20° to 750° F
- Tubing: Use with soft or firm (Durometer 65A-90A) polyurethane rubber or PVC plastic
- Specifications Met: See table
Made of stainless steel, these fittings are more durable than plastic barbed tube fittings for food and beverage. They have single or multiple barbs that grip onto tubing.
Fittings with female 45° flared end connect to the male flared end of another fitting.

For Tube ID (Barbed) | For Tube OD (Flared) | Material | Max. Pressure | Specifications Met | Each | |
1/4" | 1/4" | 303 Stainless Steel | 270 psi @ 72° F | ASTM A581, ASTM A582 | 0000000 | 00000 |
1/4" | 5/16" | 303 Stainless Steel | 270 psi @ 72° F | ASTM A581, ASTM A582 | 0000000 | 0000 |
1/4" | 3/8" | 303 Stainless Steel | 270 psi @ 72° F | ASTM A581, ASTM A582 | 0000000 | 0000 |
3/8" | 1/4" | 303 Stainless Steel | 270 psi @ 72° F | ASTM A581, ASTM A582 | 0000000 | 0000 |
3/8" | 5/16" | 303 Stainless Steel | 270 psi @ 72° F | ASTM A581, ASTM A582 | 0000000 | 0000 |
3/8" | 3/8" | 303 Stainless Steel | 270 psi @ 72° F | ASTM A581, ASTM A582 | 0000000 | 0000 |

For Tube ID (Barbed) | For Tube OD (Flared) | Material | Max. Pressure | Specifications Met | Each | |
1/8" | 1/4" | 303 Stainless Steel | 270 psi @ 72° F | ASTM A581, ASTM A582 | 0000000 | 00000 |
1/8" | 5/16" | 303 Stainless Steel | 270 psi @ 72° F | ASTM A581, ASTM A582 | 0000000 | 0000 |
1/4" | 1/4" | 303 Stainless Steel | 270 psi @ 72° F | ASTM A581, ASTM A582 | 0000000 | 0000 |
1/4" | 5/16" | 303 Stainless Steel | 270 psi @ 72° F | ASTM A581, ASTM A582 | 0000000 | 0000 |
1/4" | 3/8" | 303 Stainless Steel | 270 psi @ 72° F | ASTM A581, ASTM A582 | 0000000 | 0000 |
3/8" | 1/4" | 303 Stainless Steel | 270 psi @ 72° F | ASTM A581, ASTM A582 | 0000000 | 0000 |
3/8" | 5/16" | 303 Stainless Steel | 270 psi @ 72° F | ASTM A581, ASTM A582 | 0000000 | 0000 |
3/8" | 3/8" | 303 Stainless Steel | 270 psi @ 72° F | ASTM A581, ASTM A582 | 0000000 | 0000 |
1/2" | 1/2" | 303 Stainless Steel | 270 psi @ 72° F | ASTM A581, ASTM A582 | 0000000 | 0000 |