Made of polypropylene, these fittings are lighter in weight than metal barbed hose fittings.

Made of nylon, these fittings are lighter in weight than metal barbed hose fittings.They have sharper barbs than standard barbed hose fittings to grip push-on hose without the need for clamps or ferrules. The more you pull on the fittings, the tighter the hose will grip.

Also known as ball-seat hose nipples, these fittings consist of a barbed shaft with a rounded end that sits inside a female threaded nut. When mated with a male threaded fitting, the rounded end presses tightly against the inside of the male threads for a better seal than a single-piece fitting. Once assembled, insert the barbed end into hose and secure with a clamp or a crimp-on hose ferrule.

Made of polypropylene, these cam-and-groove couplings are lighter in weight than metal cam-and-groove hose couplings.

Insert these caps into a cam-and-groove socket to protect the end of the coupling from damage. The attached handle allows you to easily maneuver hose.

Kits contain Industrial quick-disconnect plugs in four coupling sizes so you can determine the size of your couplings without needing to measure.

Sockets accommodate five common plug shapes: Industrial, ARO, Lincoln, Tru-Flate, and European.

Also known as automotive couplings. Compatible with Tru-Flate-shape plugs and sockets.

Compatible with Japanese-shape plugs and sockets.

Plugs and sockets are color coded by shape so you can't mix hose lines. Only plugs and sockets of the same color will fit together.

Made of acetal, these couplings are lighter in weight than metal quick-disconnect couplings. Compatible with Plastic-shape plugs and sockets.

Compatible with Ring-Lock-shape plugs and sockets.

Couplings have a spring-loaded locking sleeve that automatically locks into place to prevent accidental disconnection. The identical claw-style head connects to another spring-lock twist-claw hose coupling with a quarter twist.

These couplings have a lower profile than other claw-style couplings to fit in cramped spaces. They consist of a plug and a socket that connect with a quarter twist. Also known as Bowes couplings.

Couplings are plastic, which is lighter in weight than metal cam-and-groove hose couplings. They consist of a plug and a socket that connect and disconnect quickly. Use them if you need frequent access to a line. To connect, insert the plug into the socket and push the levers down.

Made of polypropylene, these couplings are lighter in weight than metal cam-and-groove couplings. Also known as dry disconnects and double shut-off couplings, they have a shut-off valve in the plug and the socket for minimal fluid loss when disconnecting your hose line.

These metal hose fittings have better durability than plastic barbed hose fittings. They are 316 stainless steel for excellent corrosion and chemical resistance. Slide the barbed end into hose and secure with a clamp.

Low-profile barbs and a longer first barb allow for a smoother, easier installation than other barbed fittings. Slide the barbed end into hose and secure with a clamp.

Fittings meet NSF/ANSI Standard 61 for drinking water. Attach them to garden hose for a variety of water supply applications. They are metal for better durability than plastic garden hose fittings.

Couplings consist of a plug and a socket that connect more quickly than threaded garden hose couplings. To connect, push the plug into the socket. The compact design makes these couplings sleeker and easier to handle than cam-and-groove garden hose couplings.

Couplings consist of a plug and a socket that connect more quickly than threaded garden hose couplings. To connect, insert the plug into the socket and press the levers down.

A single rounded bead grips onto hose just like a barb, but has no sharp edges that could cut or damage soft hose. Slide the beaded end into hose and secure with a clamp. Use in coolant applications up to 300 psi.

Use these couplings at pressures up to 5,000 psi. They consist of a plug and socket that connect and disconnect quickly. Use them if you need frequent access to a line. They are compatible with International Standard ISO B-shape plugs and sockets.

Use these couplings at pressures up to 7,200 psi. Also known as flush-face couplings, the plugs and sockets have a flat face, which allows them to mate close together, reducing fluid loss when connecting and disconnecting the line. They are compatible with International Standard ISO Minimal-Spill-shape plugs and sockets.

Use these couplings at pressures up to 3,000 psi. They consist of a plug and socket that connect and disconnect quickly. Use them if you need frequent access to a line. They are compatible with Pioneer-shape plugs and sockets.

Use these couplings at pressures up to 10,000 psi. The plug and socket thread together to form a stronger connection than other quick-disconnect couplings. They are compatible with High-Pressure Thread-Lock-shape plugs and sockets.

Sets contain a crimping tool and a variety of CGA fittings, nuts, and ferrules so you can connect pressure regulators, torches, and other components of your welding system.

Also known as ground-joint couplings and boss couplings, these fittings are designed for high-pressure steam applications up to 600 psi. Insert the barbed end of the fitting into hose, then position the interlocking clamp over the hose and bolt into place. The clamp firmly grips your hose as it locks into the ring of the barbed end, creating a leak-tight seal.

These couplings are compatible with International Standard ISO Series B-shape plugs and sockets. They are FDA compliant, so they’re suitable for food and beverage applications and won’t impart tastes or odors to the product. They consist of a plug and a socket that connect and disconnect quickly so you can frequently access your line. Use at pressures up to 220 psi.

Fittings are made of FDA listed materials, so they’re suitable for food and beverage applications and won’t impart tastes or odors to the product. Slide the barbed end into hose and secure with a clamp.

Hose is PVC, so it’s lighter and less cumbersome than rubber hose.

An extra-strong yarn reinforcement gives this hose excellent durability to handle high pressures.

This hose withstands the highest pressures of all our air hose for push-on fittings.

Hose is SBR rubber, so it stands up to the wear and tear of daily use.

Because the white cover on this hose makes dirt and other contaminants easy to spot, it is often used as a washdown hose in creamery and paper-mill applications.

The steel wire reinforcement gives this hose extra strength in high-pressure conditions.

Made of PVC, this hose is economical yet durable enough to handle vacuum up to 28 Hg.

Blended rubber construction with extra-strong reinforcement gives this hose strength to transfer large volumes of water in high-vacuum or high-pressure operations.

Spiral reinforcement on the outside of the hose acts as a wear strip to protect against damage caused by dragging.

Drain water from one place to another. Hose lays flat and folds up for carrying and storage.

You don’t need a lot of force to bend this low-pressure chemical hose. The extra flexibility makes it good for offset connections and tight spaces.

Step on this hose and it springs back to its original shape.

Expose this UHMW (ultra-high molecular weight) polyethylene hose to harsh physical conditions without worrying about it deteriorating or becoming brittle.

Made of FEP (fluorinated ethylene propylene), this hose can stand up to chemicals at high temperatures.

Attach push-on barbed fittings to this hose for use in low-pressure hydraulic applications. No clamps are needed to secure fittings to the hose; the more you pull on the fittings, the tighter the hose will grip.