Material Material |
|---|
|
For Use With For Use With |
|---|
|
For Tube Material For Tube Material |
|---|
|
Maximum Vacuum Maximum Vacuum |
|---|
|
Maximum Pressure Maximum Pressure |
|---|
|
For Tube Hardness For Tube Hardness |
|---|
|
Finish Finish |
|---|
|
Sterilize With Sterilize With |
|---|
|
How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
Brass Low-Pressure Barbed
Tube Fittings for Air and Water
A brass body provides protection against corrosive environments. Fittings have barbs that grip onto tubing.
NPTF (Dryseal) fittings are compatible with NPT threads.
For technical drawings and 3-D models, click on a part number.
- Temperature Range: -65° to 75° F
- Tubing: Use with firm (Durometer 95A) polyurethane rubber
| For Tube ID | Pipe Size | Number of Barbs | Material | Max. Pressure | Each | |
NPTF Threads | ||||||
|---|---|---|---|---|---|---|
| 3/32" | 1/8 | Multiple | Brass | 100 psi @ 72° F | 000000000 | 00000 |
| 0.17" | 1/16 | Multiple | Brass | 100 psi @ 72° F | 000000000 | 0000 |
| 0.17" | 1/8 | Multiple | Brass | 100 psi @ 72° F | 000000000 | 0000 |
| 0.17" | 1/4 | Multiple | Brass | 100 psi @ 72° F | 000000000 | 0000 |
| 1/4" | 1/8 | Multiple | Brass | 100 psi @ 72° F | 000000000 | 0000 |
| 1/4" | 1/4 | Multiple | Brass | 100 psi @ 72° F | 000000000 | 0000 |
| 3/8" | 1/4 | Multiple | Brass | 100 psi @ 72° F | 000000000 | 00000 |
| 3/8" | 3/8 | Multiple | Brass | 100 psi @ 72° F | 000000000 | 0000 |
- Temperature Range: -65° to 75° F
- Tubing: Use with firm (Durometer 95A) polyurethane rubber
Nickel-Plated Brass Low-Pressure
Barbed Tube Fittings for Air and Water
The nickel plating on these brass fittings provides extra protection against corrosive environments. The plating won’t peel or chip, so the fittings keep a bright, polished appearance. The barbs grip onto tubing, providing a secure hold with no clamp required.
UN/UNF (SAE) and BSPP male threads have an O-ring to protect against leaks. Also known as O-ring boss threads.
For technical drawings and 3-D models, click on a part number.
- Temperature Range: -20° to 160° F
- Tubing: Use with firm (Durometer 85A) polyurethane rubber
Fittings with intermittent swivel rotate 360° before and after installation as needed to allow movement in the system and to prevent kinking.
- Temperature Range: -40° to 230° F
- Tubing: Use with hard (Durometer 60D-90D) Buna-N rubber, EVA plastic, Nylon plastic, polyethylene plastic, polypropylene plastic, polyurethane rubber, PTFE plastic, PVC plastic, PVDF plastic, or silicone rubber
Aluminum Low-Pressure Barbed
Tube Fittings for Air and Water
- For Use With: Air, Lubricated Air, Water
- Temperature Range: -40° to 230° F
- Tubing: Use with hard (Durometer 75A-60D) EVA plastic, polyethylene plastic, polyurethane rubber or PVDF plastic
Made of aluminum, these fittings are lighter in weight than other metal barbed tube fittings and have good corrosion resistance. The barb grips onto tubing, providing a secure hold with no clamp required.
For technical drawings and 3-D models, click on a part number.
| For Tube ID | Material | Max. Pressure | Each | |
| 1/16" | Aluminum | 125 psi @ 72° F | 00000000 | 00000 |
| 1/8" | Aluminum | 125 psi @ 72° F | 00000000 | 0000 |
| 0.17" | Aluminum | 125 psi @ 72° F | 00000000 | 0000 |
| 1/4" | Aluminum | 125 psi @ 72° F | 00000000 | 0000 |
| 3/8" | Aluminum | 125 psi @ 72° F | 00000000 | 00000 |
| 1/2" | Aluminum | 125 psi @ 72° F | 00000000 | 00000 |
| 2mm | Aluminum | 125 psi @ 72° F | 0000000 | 0000 |
| 4mm | Aluminum | 125 psi @ 72° F | 0000000 | 0000 |
Choose-a-Color Aluminum Low-Pressure
Barbed Tube Fittings for Air and Water
- For Use With: Air, Lubricated Air, Water
- Temperature Range: -40° to 230° F
- Tubing: Use with hard (Durometer 75A-60D) EVA plastic, polyethylene plastic, polyurethane rubber or PVDF plastic
Color-code fittings for easy identification. Fittings are aluminum, which is lightweight with good corrosion resistance. The barb grips onto tubing, providing a secure hold with no clamp required.
For technical drawings and 3-D models, click on a part number.
| For Tube ID | Material | Max. Pressure | Choose a Color | Each | |
| 1/16" | Anodized Aluminum | 125 psi @ 72° F | 00000000 | 00000 | |
| 1/8" | Anodized Aluminum | 125 psi @ 72° F | 00000000 | 0000 | |
| 0.17" | Anodized Aluminum | 125 psi @ 72° F | 00000000 | 0000 | |
| 1/4" | Anodized Aluminum | 125 psi @ 72° F | 00000000 | 0000 | |
| 3/8" | Anodized Aluminum | 125 psi @ 72° F | 00000000 | 00000 | |
| 1/2" | Anodized Aluminum | 125 psi @ 72° F | 00000000 | 00000 | |
| 2mm | Anodized Aluminum | 125 psi @ 72° F | 00000000 | 0000 | |
| 4mm | Anodized Aluminum | 125 psi @ 72° F | 00000000 | 0000 |
Stainless Steel High-Pressure Barbed
Tube Fittings for Air and Water
- Temperature Range: See table
- Tubing: Use with firm (Durometer 75A-95A) EVA plastic, polyethylene plastic, polypropylene plastic or PVC plastic
Fittings withstand pressures up to 250 psi. They are 303 stainless steel for very good corrosion resistance.
For technical drawings and 3-D models, click on a part number.
Metal Barbed Hose Fittings for Air and Water
Slide the barbed end into rubber hose and secure with a clamp or a crimp-on hose ferrule.
Bronze fittings have better corrosion resistance and are stronger than brass and aluminum fittings. A pipe thread sealant is recommended to seal bronze fittings with BSPP male threads, which is unlike other materials that can often use a gasket.
Fittings with a threaded end are also known as hose nipples.
For technical drawings and 3-D models, click on a part number.
- Maximum Pressure: 100 psi @ 72° F
- Temperature Range: -32° to 212° F
- Attachment Type: Use Worm-Drive Clamps
- Specifications Met: ASTM B584