Configure a connector for your application by combining housings with pins and sleeves for different wire sizes. Also known as weather-pack connectors, they withstand moisture, harsh engine fluids, and high temperatures.

Quickly replace or add connectors to an existing wiring system—connectors come assembled with wire leads already installed. Also known as weather-pack connectors, they withstand moisture, harsh engine fluids, and high temperatures.

Install these connectors in panels, enclosures, and bulkheads to join equipment with compatible Deutsch-style DC connectors.

Protect Mil. Spec. connectors when not in use.

These connectors have the same pin and socket configuration as connectors that meet MIL-DTL-26482, so they can be used with products that meet the same standard. Quickly mate them by pushing them together.

Block signal interference from nearby devices, such as motors and transmitters, while maintaining a strong, stable connection for M12 threads.

To save space and reduce the number of cords in industrial automation setups, these splitters join two devices with M12 connectors to a single cord, distribution block, or I/O module with M12 connectors.

Protect harsh environment M12 connectors when not in use.

Send power and signal to devices with M12 connections that are exposed to some of the toughest industrial stresses—from welding to metal machining and changing temperatures.

Safely use these connectors with 12 mm proximity switches, console lights, valves, and power supplies in food, beverage, and pharmaceutical applications—they’re FDA compliant for direct food contact.

Protect mini connectors when not in use.

Send higher current than M5, M8, and M12 connectors near tough industrial jobs, such as welding and metal machining.

Join two connectors that both have internal threads.

Send higher current than M12 connectors to automated systems, motors, and pumps in environments where washdowns are common.

Modify your M12 or mini connection to match cords and I/O modules in your system.

Some of the smallest signal/power connectors we offer, these connectors fit in tight spaces and are often used in electronics.

Reduce the number of cords needed to send and receive signals where space is tight—these splitters have an M8 plug and two M8 sockets, which are smaller than M12 plugs and sockets.

Screw these micro M16 connectors together to securely connect equipment.

Join M8 connections to M12 connections.

Push these connectors together to quickly create signal and data connections in tight spaces. They need less space to mate than screw-together connectors, which require two hands to twist them in place.

Connectors come assembled with wire leads already installed, so they can be quickly added to existing wiring systems. Use them with AMP MATE-N-LOK connectors.

A sealed housing protects connectors from weather. Sets include a plug and socket with wire leads already installed. They fit standard Molex connectors.

Also known as power-pole connectors, these single-pole connectors join two pin connections, rather than a pin and socket. They stack from the top and sides to form any configuration.

Connectors lock into place for a secure connection in high-vibration environments. They power small devices, such as chargers for electronics, from a vehicle. Also known as cigarette-lighter plugs and sockets.

With thick threads similar to a light bulb, these connectors take only a few turns to lock into place for a secure connection in washdown and high-vibration areas. Detach them just as quickly for frequent maintenance.

Power robotic arms and other high-amperage machines in motor controls, conveyors, and sorting and packaging systems from your main M35 power line.

These general purpose M23 connectors send power or signal to servomotors, servocontrollers, and servodrives.

Often used in devices that branch off of the main power line, these connectors power high-amperage fans, pumps, and machines in motor controls, conveyors, and sorting and packaging systems.

With a PVC housing, connectors withstand exposure to chemicals, oil, fuel, and salt water.

Configure a connector for your application—combine inserts for power and signal with a base and a hood.

Connect audio equipment. These connectors mount to panels of any thickness, as long as you drill a mounting hole first.

Extend an audio connection by plugging a cord into each end of these adapters.

Plug these adapter cords into a standard outlet and they change AC voltage to DC voltage.

To run DC-powered lab and medical equipment from your outlet, add a power cord with the plug style and length you need. These adapters meet strict IEC, UL, or ANSI/AAMI standards for use with medical devices.

Plug these cords into a vehicle socket to charge devices that run on AC voltage.

Send DC power to multiple electronics from one source. With industry standard barrel-style connections, these splitters are compatible with many power supplies and other devices.

The threaded ends on these cords seal out contaminants and resist coming loose from vibration in tough industrial environments and automated systems while sending power and signal to devices with M12 connections.

TPE insulation protects these cords from some of the toughest industrial conditions, including abrasion, coolants, chemicals, UV rays, and weld slag. Use them in areas with welding, machining, and fluctuating temperatures to send signal and power to M12 proximity switches, valves, and other devices.

Step on or roll carts and platform trucks over these M12 cords without crushing them.

Connect two devices to a distribution block or I/O module with just one cord. Often used with sensors and actuators, these splitters send power/signals to your devices through a single connection.

With a higher maximum current than nano M8 and micro M12 cords, these mini cords are often used with automated systems, motors, and pumps.

Compatible with Molex connectors, these cords are sized to fit in tight spaces. They're often used in the interior of machines.

Like a tree trunk connecting to branches, these cords supply power to a chain of devices. Send power to high-amperage motors, robotic arms, and other machines in motor controls, conveyors, and sorting and packaging systems.

A few turns is all it takes to join these cords, which have thick threads similar to a light bulb, for a secure connection in washdown and high-vibration areas. They detach just as fast for frequent maintenance.

Similar to branches extending from a tree, these cords disperse power from a main power line to run a chain of devices. Power high-amperage fans, pumps, and other machines in motor controls, conveyors, and sorting and packaging systems.

No drilling or fasteners needed—a screw-in cover plate makes it easy to mount these chargers for powering up phones, tablets, speakers, cameras, and other small devices.

Combine a plug and a socket to form a terminal block—the two-piece design allows quick disconnection for equipment repairs.

Mount blocks to a panel or the surface of a machine. Also known as barrier terminal strips.

A single row of terminals fits in narrow spaces.

Blocks are made of ceramic to withstand elevated temperatures.

Save time when wiring connections in a junction box; these blocks come already installed in an enclosure.

Use with DIN 3 and DIN 1 rail. Add as many circuits as you need with these terminal blocks and accessories.

Blocks mount in a cutout and have terminals on both sides.

Stack multiple ring or spade terminals on the stud terminal; the current flows through the stacked terminals.

Distribute up to 150 amps from the center stud terminal to the eight screw terminals around it.

Connect these lifters to your robot arm to pick up and move items using suction. They're electric, so you don't need a compressed air source.

Convert drum openings with metric or BSPP threads to a 2 NPT pipe size.

Add a gasket or replace one that's worn out to ensure a tight seal.

Push or pull the faucet handle to open; release the handle and the faucet automatically shuts off.

These faucets meet NSF/ANSI standards.

All of these faucets are primarily used on drums, but can also be used on tanks, carboys, and other containers.

Prevent drum failure by using these vents to release pressure caused by sudden temperature changes and vacuum buildup caused by draining liquids.

Use these fittings for low-pressure applications in noncorrosive environments.

In addition to being lightweight, these aluminum fittings offer good corrosion resistance. Use them in low-pressure flow applications.

Made of corrosion-resistant plastic, these fittings won’t deteriorate when used in oil applications. They have high strength and impact resistance.

Connect to CPVC pipe for use in high-temperature plumbing and water supply applications up to 200° F.

Made of polypropylene, these fittings won’t deteriorate when exposed to the damaging effects of ultraviolet light and are suitable to use outdoors. They have the chemical resistance to withstand acids, solvents, and other harsh substances.