McMaster-Carr logo
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    86 Products
    About Hinges
    industrial info icon

    Choose the right hinge based on mounting style, clearance, leaf thickness, knuckle length, and other important dimensions.

    Bullet Hinges

    Image of Product. Front orientation. Hinges. Bullet Hinges.
    Image of Product. Bottom orientation. Hinge Bushings.

    Replacement

    Hinge

    Bushings

    Secure heavy metal doors and gates without the bulk of large hinge leaves. The compact bullet shape of these hinges takes up very little space on frames and doors. Weld the male half of the hinge to the frame and the female half to the door—then you can quickly lift the door off without removing the pin.
    Low-Carbon Steel—Strong and the easiest to weld but will rust in damp environments.
    304 Stainless Steel—The choice for wet and outdoor environments, these hinges resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel hinges can.
    316 Stainless Steel—Our most corrosion-resistant stainless steel hinges won't degrade when exposed to harsh weather, salt water, and most chemicals.
    Aluminum—One-third the weight of steel, these hinges are often used on enclosures, carts, and other equipment where you want to limit the load.
    Hinges
    Replacement
    Hinge Bushings
    Door
    Leaf
    Frame
    Leaf
    Ht.
    Wd.
    Ht.
    Wd.
    Overall
    Wd.
    Range of
    Motion
    Pin
    Dia.
    Pin Material
    Each
    Each
    Low-Carbon Steel
    23/32"5/16"25/32"5/16"5/16"360°13/64"Steel1071A29000001071A70700000
    31/32"5/16"15/16"5/16"5/16"360°13/64"Steel1071A70100001071A7070000
    1 5/32"13/32"1 1/8"13/32"13/32"360°15/64"Steel1071A3100001071A7080000
    1 5/16"7/16"1 11/32"7/16"7/16"360°15/64"Steel1071A2200001071A7090000
    1 17/32"1/2"1 17/32"1/2"1/2"360°5/16"Steel1071A3300001071A7240000
    1 15/16"5/8"1 15/16"5/8"5/8"360°25/64"Steel1071A3400001071A7110000
    2 5/16"5/8"2 11/32"5/8"5/8"360°25/64"Steel1071A23000001071A7110000
    2 5/8"23/32"2 19/32"23/32"23/32"360°1/2"Steel1071A24000001071A7120000
    2 29/32"25/32"2 15/16"25/32"25/32"360°1/2"Steel1071A36000001071A7130000
    3 15/32"25/32"3 17/32"25/32"25/32"360°1/2"Steel1071A25000001071A7130000
    3 7/8"29/32"3 29/32"29/32"29/32"360°5/8"Steel1071A38000001071A7140000
    5"1 3/32"5 5/32"1 3/32"1 3/32"360°3/4"Steel1071A702000001071A7150000
     
    304 Stainless Steel
    23/32"5/16"25/32"5/16"5/16"360°13/64"304 Stainless Steel
    1071A70300001071A7230000
    15/16"5/16"15/16"5/16"5/16"360°13/64"304 Stainless Steel
    1071A70400001071A7230000
    1 5/32"13/32"1 1/8"13/32"13/32"360°15/64"304 Stainless Steel
    1071A5100001071A7170000
    1 5/16"7/16"1 11/32"7/16"7/16"360°15/64"304 Stainless Steel
    1071A5200001071A7180000
    1 17/32"1/2"1 17/32"1/2"1/2"360°5/16"304 Stainless Steel
    1071A5300001071A7190000
    1 29/32"5/8"1 15/16"5/8"5/8"360°25/64"304 Stainless Steel
    1071A54000001071A720000
    2 5/16"5/8"2 11/32"5/8"5/8"360°25/64"304 Stainless Steel
    1071A705000001071A720000
    2 5/8"23/32"2 19/32"23/32"23/32"360°1/2"304 Stainless Steel
    1071A57000001071A7160000
    2 7/8"25/32"2 15/16"25/32"25/32"360°1/2"304 Stainless Steel
    1071A59000001071A7210000
    3 7/8"29/32"3 29/32"29/32"29/32"360°5/8"304 Stainless Steel
    1071A706000001071A7220000
     
    316 Stainless Steel
    25/32"5/16"25/32"5/16"5/16"270°3/16"316 Stainless Steel
    13615A5700000———0
    1"3/8"1"3/8"3/8"270°15/64"316 Stainless Steel
    13615A5600000———0
    1 5/32"13/32"1 1/8"13/32"13/32"360°15/64"316 Stainless Steel
    1071A61000001071A7170000
    1 3/8"1/2"1 3/8"1/2"1/2"270°5/16"316 Stainless Steel
    13615A5400000———0
    1 17/32"1/2"1 17/32"1/2"1/2"360°5/16"316 Stainless Steel
    1071A66000001071A7190000
    1 19/32"5/8"1 19/32"5/8"5/8"270°25/64"316 Stainless Steel
    13615A5500000———0
    1 29/32"5/8"1 15/16"5/8"5/8"360°25/64"316 Stainless Steel
    1071A67000001071A720000
     
    Aluminum
    13/16"5/16"13/16"5/16"5/16"360°13/64"Stainless Steel
    3991A100001071A7230000
    1"5/16"1"5/16"5/16"360°13/64"Stainless Steel
    3991A200001071A7230000
    1 3/16"3/8"1 3/16"3/8"3/8"360°15/64"Stainless Steel
    3991A300001071A7170000
    1 3/8"7/16"1 3/8"7/16"7/16"360°15/64"Stainless Steel
    3991A400001071A7180000
    1 9/16"1/2"1 9/16"1/2"1/2"360°5/16"Stainless Steel
    3991A5000001071A7190000
    1 31/32"5/8"1 31/32"5/8"5/8"360°25/64"Stainless Steel
    3991A6000001071A720000
    2 21/32"11/16"2 21/32"11/16"11/16"360°1/2"Stainless Steel
    3991A7000001071A7160000
    2 31/32"13/16"2 31/32"13/16"13/16"360°1/2"Stainless Steel
    3991A8000001071A7210000
    3 9/16"13/16"3 9/16"13/16"13/16"360°1/2"Stainless Steel
    3991A9000001071A7210000
    3 15/16"15/16"3 15/16"15/16"15/16"360°5/8"Stainless Steel
    3991A11000001071A7220000
     

    Easy-Lube Bullet Hinges

    Image of Product. Front orientation. Hinges. Easy-Lube Bullet Hinges.
    Image of Product. Bottom orientation. Hinge Bushings.

    Replacement

    Hinge

    Bushings

    Grease these hinges without the hassle of disassembly or the mess of lubricating from the outside. They have a grease fitting for injecting lubricant to reduce wear, prevent rust and seizing, and eliminate squeaks. The compact bullet shape takes up very little space, yet hinges are strong enough for large, heavy doors. Weld the male half of the hinge to the frame and the female half to the door—then you can quickly lift the door off without removing the pin.
    Low-Carbon Steel—Strong and the easiest to weld but will rust in damp environments.
    Aluminum—One-third the weight of steel, these hinges are often used on enclosures, carts, and other equipment where you want to limit the load.
    Hinges
    Replacement
    Hinge Bushings
    Door
    Leaf
    Frame
    Leaf
    Ht.
    Wd.
    Ht.
    Wd.
    Overall
    Wd.
    Range of
    Motion
    Pin
    Dia.
    Pin Material
    Each
    Each
    Low-Carbon Steel
    1 17/32"1/2"1 17/32"1/2"1/2"360°5/16"Brass3636A1000001071A72400000
    1 15/16"5/8"1 15/16"5/8"5/8"360°25/64"Brass3636A2000001071A7110000
    2 5/16"5/8"2 5/16"5/8"5/8"360°25/64"Brass3636A3000001071A7110000
    2 9/16"23/32"2 9/16"23/32"23/32"360°1/2"Low-Carbon Steel3636A11000001071A7120000
    2 15/16"25/32"2 15/16"25/32"25/32"360°1/2"Brass3636A4000001071A7130000
    3 17/32"25/32"3 17/32"25/32"25/32"360°1/2"Brass3636A5000001071A7130000
    3 31/32"29/32"3 31/32"29/32"29/32"360°5/8"Brass3636A6000001071A7140000
    5 3/32"1 3/32"5 3/32"1 3/32"1 3/32"360°3/4"Low-Carbon Steel3636A12000001071A7150000
     
    Aluminum
    1 1/2"1/2"1 17/32"1/2"1/2"360°5/16"304 Stainless Steel
    3636A2100001071A7190000
    1 15/16"5/8"1 15/16"5/8"5/8"360°25/64"304 Stainless Steel
    3636A22000001071A720000
    2 7/8"13/16"2 15/16"13/16"13/16"360°1/2"304 Stainless Steel
    3636A23000001071A7210000
     

    Barrel-Shaped Hidden Hinges

    Image of ProductInUse. Front orientation. Hinges. Barrel-Shaped Hidden Hinges.
    Easier to install than other hidden hinges, cut holes instead of routing slots. When the doors are closed, these hinges are invisible for a sleek look. They open a full 180°.
    Brass—With a warm, polished look, these hinges are typically chosen for their appearance. They also resist corrosion in wet environments.
    Mounting
    Holes
    For Cutout
    Dp.
    Leaf
    Dia.
    Range of
    Motion
    Pin Material
    For Min.
    Door Thk.
    For Drill
    Bit Size, mm
    No.
    of
    Fasteners
    Included
    Each
    Brass
    7/16"3/8"180°303 Stainless Steel
    1/2"102No17725A4100000
    1/2"7/16"180°Steel5/8"122No17725A460000
    5/8"9/16"180°Steel3/4"142No17725A470000
    5/8"5/8"180°Brass7/8"162No17725A450000
     

    Lift-Off Block Hinges

    Image of Product. Front orientation. Hinges. Lift-Off Block Hinges, Style 1 with Mounting Holes.
    Image of Product. Front orientation. Hinges. Lift-Off Block Hinges, Style 2 with Mounting Holes.
    Image of Product. Front orientation. Hinges. Lift-Off Block Hinges, Style 3 with Mounting Holes.
    Image of Product. Front orientation. Hinges. Lift-Off Block Hinges, Style 4 with Mounting Holes.

    Style 1

    with

    Mounting

    Holes

    Style 2

    with

    Mounting

    Holes

    Style 3

    with

    Mounting

    Holes

    Style 4

    with

    Mounting

    Holes

    Image of Specification. Front orientation. Left-Side Door Mount. Slip-Joint Hinge, Surface Mount.
    Image of Specification. Front orientation. Right-Side Door Mount. Slip-Joint Hinge, Surface Mount.

    Left-Side Door Mount

    Right-Side Door Mount

    Our most compact metal lift-off hinges fit the narrow frames on cabinets and enclosures. The pin is attached to the frame leaf, so you can lift off doors without removing the pin or unscrewing the hinge.
    Style 3—These hinges have a removable pin so you can reverse the mount of the door. Lightly tap the pin to take it out.
    Black Painted Zinc Alloy—The dark finish blends in or stands out. Zinc hinges hold up to moisture but aren’t as strong as steel hinges.
    303 Stainless Steel—The choice for wet and outdoor environments, these hinges resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel hinges can.
    For Overlay Door—For doors that cover their frame entirely.
    For Inset Door—For doors that are flush with their frame when closed.
    Door Mounting Location—To choose a door mounting location, stand on the pull side of the door. Use a right-side hinge if the hinge is on the right, or a left-side hinge if it’s on the left.
    Door
    Leaf
    Frame
    Leaf
    Mounting
    Holes
    Left-Side Door Mount
    Right-Side Door Mount
    Left-Side Door Mount,
    Right-Side Door Mount
    Ht.
    Wd.
    Ht.
    Wd.
    Overall
    Wd.
    Range of
    Motion
    Fasteners
    Included
    Screw
    Size
    For Door Frame
    Coverage
    Each
    For Door Frame
    Coverage
    Each
    For Door Frame
    Coverage
    Each
    Style 1 with Mounting Holes
     
    Black Painted Zinc Alloy
    1 1/4"9/16"1 1/4"9/16"11/16"180°NoNo. 10
    ———0———0Overlay11955A73000000
     
    Style 2 with Mounting Holes
     
    Black Painted Zinc Alloy
    1 1/8"5/16"1 1/8"5/16"1/2"180°NoNo. 6
    ———0———0Overlay11955A630000
     
    Style 3 with Mounting Holes
     
    303 Stainless Steel
    1 1/4"1/2"1 1/4"1/2"1/2"180°NoM5
    ———0———0Overlay19035A7100000
    1 1/2"1/2"1 1/2"1/2"1/2"180°NoM6
    ———0———0Overlay19035A7300000
    2"3/4"2"3/4"3/4"180°NoM8
    ———0———0Overlay19035A7500000
     
    Style 4 with Mounting Holes
     
    Black Painted Zinc Alloy
    1"13/16"5/8"3/8"13/16"180°NoNo. 6
    Inset11955A6700000Inset11955A6600000———0
    2 1/2"1 1/4"1 1/4"9/16"1 1/4"180°NoNo. 10
    Inset11955A7700000Inset11955A7600000———0
     

    Plastic Lift-Off Block Hinges

    Image of Product. Front orientation. Hinges. Plastic Lift-Off Block Hinges.
    Image of Specification. Front orientation. Left-Side Door Mount. Surface Mount, Slip-Joint Hinge.
    Image of Specification. Front orientation. Right-Side Door Mount. Surface Mount, Slip-Joint Hinge.

    Left-Side Door Mount

    Right-Side Door Mount

    Lightweight and compact, our smallest plastic lift-off hinges fit the narrow frames on cabinets and enclosures. The pin is attached to the frame leaf, so you can lift off doors and panels without removing the pin or unscrewing the hinge.
    Black Nylon—The most common plastic hinges. They're slippery and abrasion resistant, so they swing freely.
    For Overlay Door—For doors that cover their frame entirely.
    For Inset Door—For doors that are flush with their frame when closed.
    Door Mounting Location—To choose a door mounting location, stand on the pull side of the door. Use a right-side hinge if the hinge is on the right, or a left-side hinge if it’s on the left.
    Door
    Leaf
    Frame
    Leaf
    Mounting
    Holes
    Left-Side Door Mount
    Right-Side Door Mount
    Left-Side Door Mount,
    Right-Side Door Mount
    Ht.
    Wd.
    Ht.
    Wd.
    Range of
    Motion
    Fasteners
    Included
    Screw
    Size
    For Door Frame
    Coverage
    Each
    For Door Frame
    Coverage
    Each
    For Door Frame
    Coverage
    Each
    With Mounting Holes
     
    Black Nylon
    1 3/16"9/16"1 3/16"9/16"180°NoNo. 10
    Inset11835A1700000Inset11835A1600000Overlay11835A1300000
    1 5/8"3/4"1 5/8"3/4"180°No1/4"
    Inset11835A210000Inset11835A220000Overlay11835A180000
     
    back to top