Instead of tilting these trucks during transport, push on the handle to lift a drum straight off the ground and move it easily over obstacles. Push the handle down to tilt the drum and dispense. They are suited for long distance moves and are easier to move than mobile drum dispensing stands. Trucks have a drum saddle with a chain and ratchet-style tightener to secure the drum. A handle lock prevents unintentional lowering and a tilt lock keeps the drum vertical. Release the tilt lock for mixing. The rear swivel caster makes them easy to steer. Their lightweight polypropylene wheels roll best on smooth surfaces.

These corrosion-resistant stainless steel trucks withstand harsh environments and frequent washdowns. Load wedges slide under the drum for easy loading and unloading, and a spring-loaded kickstand keeps the truck standing and adds stability during dispensing. The four polypropylene wheels are suitable for long distance moves on smooth surfaces.

Spills while dispensing drums are contained in an internal sump, so you can transport the drum even after a spill occurs. A U-shaped platform with a recessed step and molded handles makes loading, unloading, and tipping to dispense easy. A strap secures the drum. In the dispensing position, the drum is held at a slight downward angle for better flow. The sump has two openings with garden hose threads for drainage.

Use trucks with polypropylene wheels on smooth surfaces. Trucks with rubber wheels absorb shock to roll on smooth and rough surfaces. Meets EPA 40 CFR 264.175 for secondary containment of hazardous waste.

Move a drum where you need it, then dispense. Also known as drum cradles, these stands are an economical way to store, mix, and drain drums. Drum rim catches secure drums and prevent them from slipping out.

Style F has load wedges that slide under the drum for easy loading and cross braces with rollers that let you rotate the drum for draining and mixing in the horizontal position.

Telescoping handles provide leverage and control when tipping a drum to empty.

Skid-resistant surfaces prevent sliding when loading.

Polypropylene and polyethylene wheels are lightweight and roll best on smooth surfaces. Rubber wheels absorb shock, are quiet, and roll over smooth or rough surfaces. Steel and aluminum wheels are rugged but noisy and can damage floors. They roll best on smooth surfaces.

Note: Length for stands with telescoping handles is with handles in the retracted position.

A second set of axle-mounted wheels offers better load support and stability to handle heavy loads over longer distances. Trucks cradle the drum during transport and are designed to stand upright on their own. Load wedges slide under the drum for easy loading.

All trucks have a rim catch that clamps to the top of the drum to secure it. Spring-loaded rim catches automatically clamp to the drum as it's tilted.

Styles A, C, and D have standard handles with grips as well as a loop handle for better control.

Style B have a heavy duty cradle and an easy-tilt axis that makes it easier to tilt the trucks and get them rolling.

Style D have a hand brake for more control on ramps and inclines.

Steel trucks are durable.

Aluminum trucks are strong, spark resistant, and lighter in weight than steel trucks.

Polypropylene wheels are lightweight and work on smooth surfaces. Rubber wheels absorb shock, are quiet, and roll over smooth or rough surfaces. Steel wheels are rugged but noisy and can damage floors. They roll best on smooth surfaces. Phenolic wheels are nonmarking and roll best on smooth surfaces, but can be noisy. Pneumatic rubber wheels provide a cushioned ride over the roughest surfaces, such as gravel.

These two-wheeled trucks are good for moving drums short distances. Trucks cradle the drum during transport. They have load wedges that slide under the drum for lifting.

Trucks with a rim catch clamp to the top of the drum to secure it.

Spring-loaded axles make it easier to tilt the trucks and get them rolling.

Style A and B trucks have a kickstand to keep them upright when not in use.

Style C trucks have load rollers for easy loading and unloading of drums from pallets.

Style D trucks have a strap with spring-loaded cinching buckle to secure drums. They stand upright on their own.

Polypropylene wheels are lightweight and work on smooth surfaces. Rubber tread-on-core wheels have a hard core for strength surrounded by a shock- and sound-absorbing tread for a cushioned ride on all surfaces. Steel wheels are rugged but noisy and can damage floors. They roll best on smooth surfaces.

Contain spills when moving and storing drums. Dollies have plastic wheels for use on smooth surfaces.

Dollies with perforated platforms have removable top grating deck for easy cleaning and a drain plug in the base. Wheel brakes prevent dollies from rolling. They meet EPA 40 CFR 264.175 for secondary containment of hazardous waste.

Dollies with two swivel casters and two axle mounted wheels have better steering control.

Maximize stability and minimize spills. These dollies have a large, open platform that sits low to the ground to slide under drums for better support and minimal tipping. A T-handle pivots out for pulling, locks upright for pushing, and folds in for storage. One swivel caster and two axle mounted wheels make these dollies easy to steer. Casters are welded to the frame for strength.

Polypropylene wheels are lightweight and work on smooth surfaces. Rubber tread-on-core wheels have a hard core for strength surrounded by a shock- and sound-absorbing tread for a cushioned ride on all surfaces. Steel wheels are rugged but noisy and can damage floors. They roll best on smooth surfaces.

The platform on this dolly is open in front to make loading and unloading easier while a lip on the other three sides keeps the load from sliding off. A removable handle and a square deck, along with two swivel and two rigid casters make it easy to push, pull, and steer along walls and aisles. The dolly can be used with round drums as well as square cartons and crates. Their phenolic wheels are nonmarking and roll best on smooth surfaces, but can be noisy.

Lift, transport, and place drums without a forklift. A V-style base makes it easy to load and unload drums from pallets and platforms. Swivel casters at the back of the truck make them easy to steer.

Trucks with a gas-spring pump handle have a U-shaped lever that engages the gas spring and ratchet mechanism to lift, hold, and release the drum. The length of the handle provides proper leverage, and the base has built-in counterbalance for stability. Hooks securely hold the drum below the rim.

Trucks with a hydraulic pump handle control lifting and lowering of the drum while a claw-style grabber attaches to the rim of the drum for a secure hold.

Trucks with a hydraulic foot pump have a pedal to control lifting and lowering of the drum while a spring-loaded clamp securely grips the rim of the drum. The legs are retractable for easier maneuvering in tight spaces.

Floor locks and wheel brakes keep trucks stationary during lifting and lowering.

Polypropylene wheels are lightweight and work on smooth surfaces. Phenolic wheels are nonmarking and roll best on smooth surfaces.

A hydraulic lift raises the drum to the required height, and a manual tilt mechanism positions the drum at the proper angle for emptying. Handlers can rotate the drums 360° in either direction. A drum saddle with chain and ratchet-style tightener secures the drum and a floor lock keeps the handlers stationary.

Styles A and B have a hand-operated hydraulic lift to position the drum at the required height. They require minimal assembly.

Style C have an electric hydraulic lift that raises the drum with the push of a button and positions the drum at the required height. Release the button to stop lifting. The load will not drop in the event of a power failure.

Handlers with a crank handle are best for dispensing at lower heights. Handlers with a chain hand wheel are easier to use at higher dispensing heights.

Optional drum adapters fit inside the saddle to hold 30-gallon drums.

Note: In half-full drums contents shift, which reduces capacity.

Warning: Never use to lift people or items over people.

With the push of a button, the electric hydraulic lift raises the drum and a chute controls the flow of the material being dispensed to prevent splashes and spills. A clamp on each side of the chute secures the drum. Handlers have a handheld pendant switch and operate only when the push-buttons are engaged. A limit switch turns off the motor when the drum reaches the maximum height. Load will not drop in the event of a power failure. Screw-down floor locks keep handlers stationary during operation.

Warning: Never use to lift people or items over people.