The inside of these drums is epoxy coated to resist rust.

Ship materials in these UN-compliant drums.

These drums are corrosion resistant and are UN-compliant for shipping.

These drums have smooth, welded seams to prevent food and chemicals from collecting in crevices.

Clamp lids onto sanitary stainless steel drums using these leverlock closing rings, which create a tight seal and are easy to put on and take off.

Replace the lids on your sanitary stainless steel drums. These lids are highly polished to prevent product buildup and bacteria growth, so they’re used to store food, beverage, and pharmaceutical products.

These faucets meet NSF/ANSI standards.

Primarily used on drums, these faucets can also be used on tanks, carboys, and other containers.

The gauge provides an instant visual check of liquid levels in your drum without interfering with the use of the faucet.

Install these plugs into drum holes using a drum-plug wrench.

Prevent drum failure by using these vents to release pressure caused by sudden temperature changes and vacuum buildup caused by draining liquids.

Prevent tampering with the contents of your drum while allowing access for filling.

Protect contents from dirt, dust, and other contaminants with these caps.

These metal batch cans meet NSF/ANSI 2 standards for food-processing equipment.

These tubs are crack and dent resistant.

These containers have two molded-in side handles and a durable bottom that stands up to dragging across the floor.

Often used in high-traffic environments, such as parking lots and cafeterias, these waste containers are dent resistant.

A galvanized finish protects these waste containers from rust.

Wheel away waste in these large-capacity containers. Made of seamless heavy duty plastic, they resist cracks, dents, and leaks.

Step on the pedal to open these containers.

Recycling labels make it clear these containers are not for waste.

Store between 30 and 550 gallons in these large tanks.

The bottom of these tanks is sloped to ensure easy and complete drainage.

Catch 3 to 30 gallons of spills and drips.

Made of 12-gauge steel, these pallets are more durable than plastic pallets.

A flexible alternative to spill-control pallets, these trays collapse when not in use for easy storage and have spill capacities up to 60 gallons.

These liners are made of polyethylene.

These polypropylene liners are rated at least 70° higher than standard liners.

Keep contents secure with these pails and tight-fitting lids.

Caps are made with an additive that prevents static charge from building up on the surface.

Use these barrels with a screw you already have or pair with a different type of screw to create a custom fastener. Made from 18-8 stainless steel, they are chemical resistant.

Use these barrels with a screw you already have or pair with a different type of screw to create a custom fastener. Made from 316 stainless steel, they have excellent chemical resistance and can be used in saltwater environments.

Use these barrels with a screw you already have or pair with a different type of screw to create a custom fastener. They're zinc plated to resist corrosion in wet environments.

Use these hex drive screws and binding barrels as a low-profile alternative to standard nut and bolt combinations.

Stainless steel binding barrels and screws have excellent corrosion resistance in most environments.

One-third the weight of steel, aluminum binding barrels and screws resist corrosion in wet environments.

An unthreaded barrel allows quick assembly with a press or a hammer.

Plastic binding barrels and caps are chemical resistant, nonconductive, and lightweight.

Install these binding barrels and screws with a standard slotted screwdriver. They require a special tool to remove.

These binding barrels and screws have good chemical resistance.

Brass binding barrels and screws are corrosion resistant in wet environments and electrically conductive.

Slide the bolt and drop the knob into the notch to secure.

No hands needed—step on the top cap to latch the bolt; retract it by pressing the side release button.

Also known as cane bolts, these latches have the added height that's needed to bridge large vertical gaps. Install them at the top or bottom of swinging doors and gates to hold them in an open or closed position.

Pull the chain-grip to unlatch hard-to-reach doors and panels.

The strike has angled ends so these latches can accept their bolt even when doors become misaligned.

These padlockable latches are reversible for right- and left-hand mounting.

A large handle makes gripping these latches easier than other lift-and-drop barrel padlockable slide-bolt latches.

These padlockable latches are often used on 2" and 3" track to keep garage and other sectional overhead doors closed.

Choose these locks if you need locks that each open with a different key.

Also known as closed-head pails, these round jugs have a small top opening. They safely ship hazardous liquids.

Also known as closed-head pails, these rectangular jugs have a small top opening. Use them to safely ship hazardous liquids.

Add a tight-fitting, snap-lock lid to safely ship hazardous materials in these sturdy pails.

Add a lid to safely ship with these pails.

The jug in these kits holds its shape as liquid is dispensed. It comes with a cardboard box for protection.

Create a custom spool to store twine, wire, rope, and chain.

Made with industry standard barrel-style ends, these connectors carry DC power between electronic devices and power supplies.

Create various configurations by snapping these adapters into the ports of keystone wall plates.

Plug a cord into these reels.

Controlled winding prevents the cord from whipping at the end, making winding safer and extending the life of the cord and reel.

Use these cord reels where ignitable gas and dust may be present. They're rated NEMA 4 and UL listed for Class I, Divisions 1 and 2, Groups C and D; and Class II, Divisions 1 and 2, Groups F and G hazardous environments.

The outlets have covers to keep out water and dust when not in use.

Store and transport cords.

A steel stand makes these reels more rugged than light duty cord reels.

Carry DC power in or out of electronic devices with these cords. All have industry standard barrel-style connections, letting you power electronics from power supplies.

Transmit audio, video, and data signals over long distances with minimal signal loss.

Built to rest directly on the beams of a pallet rack.

Designed for use in food processing and other sanitary environments. You can store them directly on the beams of a pallet rack.

Molded indentations hold 55-gallon drums while in transit. When stored in racks, they require a supporting deck surface.

Protect your hose when it’s not in use.

Turn the handle to rewind the hose.

Reels are enclosed to protect your hose when it's not in use.

Use with lightweight fire-fighting hose (also known as pin-rack hose), which can be folded.

Protect your hose when it's not in use.