Lightweight and flexible enough to roll up and carry, these panels are wire reinforced so they stand on their own.

Prevent heat and flame damage in small spaces—these pads are a good alternative to large blankets during localized, high-heat applications.

Protect against hot and cold temperature changes. These tarps have an insulating foam core covered by a reinforced outer cover. They are silver on one side to reflect sunlight and black on the other for UV resistance.

Keep equipment and other objects cool and dry. These tarps are silver on one side to reflect sunlight and black on the other for UV resistance.

Let air in while keeping water out. Stronger than our other breathable tarps, these are UV, abrasion, and tear resistant.

The most heat-resistant tarps we offer, these resist flames and molten metal splatter.

Protect equipment against condensation buildup and corrosion with these specially treated tarps.

These tarps withstand gasoline, methanol, sodium chloride, ammonium sulfate, petroleum, and lubricating oils.

Protect work areas and equipment from overhead leaks with these rot- and chemical-resistant tarps.

Keep equipment and other objects cool. These tarps are silver on one side to reflect sunlight and black on the other for UV resistance.

Protect equipment against condensation buildup and corrosion with these specially treated tarps.They're also heat shrinkable.

Prevent sediment and top soil from washing away while water flows through.

These dikes lay flat until they absorb water, then swell to form barriers.

Suspend these thin sheets to reflect sound and block noise from traveling to other parts of your facility.

These durable sheets resist compression and are often used in oven and power-generating applications.

Superior in strength and durability, these thin strips insulate as well as protect personnel from accidental contact with hot pipes. Use for exhaust, hot water, and process pipes.

Also known as fire wrap, these flame-resistant sheets meet ASTM E84 0/0 for flame and smoke and create a fire barrier around rectangular and round ductwork. They are often used to wrap kitchen grease exhaust ducts and air ducts.

A flexible alternative to spill-control pallets, these trays collapse when not in use for easy storage and have spill capacities up to 60 gallons.

Create workspaces by joining multiple wall panels. Partitions can be reconfigured as needs change.

Snap these bibs onto cape sleeves to provide protection for your stomach from heat and sparks when welding.

These face masks are double-layered to protect your head from radiant heat, flames, and welding sparks.

Bright colors and reflective stripes make workers stand out in low-visibility areas. Jackets cover your hips.

Made of treated cotton, these pants provide better protection against wear and abrasion than base-layer pants.

These aprons extend past the knees and wrap around each leg, providing better coverage and allowing for better mobility than other aprons.

These abrasion-, tear-, and cut-resistant leggings protect your lower legs and feet against radiant heat, flames, and welding sparks.

Choose these bright, reflective pants for high-risk areas and where low visibility is a concern.

For an added layer of insulation, wear these fitted pants under clothing.

Keep your head and neck warm.

Thicker and longer than jackets, coats provide better coverage to keep you warm in bitterly cold conditions—down to -50° F.

These jackets protect you from the cold and wind while offering greater mobility than coats.

These knee-length coats are made of breathable cotton and are self-extinguishing. A flap in the front conceals the zipper.

Wear these fitted garments under clothing for an added layer of protection against intermittent exposure to flames and radiant heat. They meet NFPA 70E standards for protection against electrical arc flashes for personal protection equipment (PPE) category 1 or 2.

Made of a cotton blend, these pants are lightweight and offer better breathability than denim jeans.

These hoods protect against paint and dust.

Add company names and employee names to your work gear.

Wear these coats to protect sensitive equipment from damage caused by static electricity. Coats are knee length.

These hip-length jackets hold up against dirt, wear, and abrasion when working with lab equipment or light machinery.

These knee-length coats hold up against dirt, wear, and abrasion when working with lab equipment or light machinery.

Also known as painters' spray socks, these breathable face masks are often used to protect against paint and dust.

Protect sensitive equipment from damage caused by static electricity.

These knee-length coats offer more coverage than jackets to protect against heat and sparks. Hot particles won't get trapped because there are no pockets. Pull tabs allow for quick removal.

These pants have no pockets, so they won’t trap hot particles when protecting against sparks. They have durable leather belt loops, as well as buttons for suspenders.

These adjustable leggings protect your shins and the top of your feet from heat, sparks, and molten metal splashes. They have pull tabs for quick removal.

Ponchos are spacious for a generous fit, so they can be worn over bulky work clothes or equipment such as backpacks.

Protect against chemical spills and splashes. Coats extend past your knees for added protection.

Bright colors and reflective stripes make workers stand out in low-visibility environments. These jackets meet ANSI/ISEA 107 standards for high-visibility clothing.

Protect against chemical spills and splashes. One-piece coveralls have fewer openings than chemical-resistant rain suits.

Breathable to keep you cool and comfortable, these pants protect against dirt, grime, and light liquid splashes.

Coveralls provide full body protection against dirt and grime.

Protect the front of your body from dirt, grime, and other materials.

These chaps are designed to meet ASTM F1897 leg protection standards for chain saw users.

These hoods prevent pollutants, such as dust particles and microbes, from contaminating a space.

These gloves meet NFPA 70E for protection against arc-flash hazards. They are made with flame-resistant materials and are rated for cut resistance.

These gloves are commonly used in meat packing and other food-service environments. Made of interwoven fabric and stainless steel fibers, they offer cut protection without sacrificing dexterity.

Bumpers on the back of these gloves protect your hands from impact when working in confined spaces. These gloves are rated for cut resistance to protect hands from sharp objects.

Safeguard hands from cold objects as well as cold weather. These gloves remain flexible in low temperatures, have a thermal liner, and are rated for cut resistance.

Use these gloves to avoid cuts when working with sharp or pointy objects.

In addition to being reinforced, the palms are coated to protect against punctures from sharp or pointy objects such as needles and syringes.

Use these gloves to avoid damaging static-sensitive electronic parts.

Minimize hand fatigue while operating rivet guns, jackhammers, and other power tools that produce high levels of vibration.

The coating on these gloves provides extra protection without limiting dexterity. It also provides a secure grip.

Comfortable and flexible, these fabric gloves are good for parts handling, maintenance, fabrication, and other general purpose applications.

Prevent damage to gloves in storage.

Reduce fatigue during jobs that require you to perform the same hand motions over and over. The open-finger style keeps your fingers free to grip objects.

Use these gloves to cover your hands while leaving your fingers open to grip objects.

These gloves meet ANSI/ISEA 105 standards for cut resistance. They are cleaned and bagged in environments with low levels of particulates, so they won't contaminate your work area.

Slip these pads over gloves for additional protection against sparks and spatter.

Designed for intermittent handling of hot pipes, engine parts, and castings, these gloves protect your hands from moderate heat and some abrasion.

Maintain a secure grip on wet surfaces. These gloves have a lining that safeguards hands from cold objects as well as cold weather.

Protect your hands from intermittent exposure to extreme heat during jobs such as metal forging and glass manufacturing.

Keep hands warm in temperatures as low as -320° F without sacrificing dexterity. These gloves can be used to handle dry ice.

Made of aluminized fabric, these gloves reflect radiant heat and protect against sparks.

These mitts can be worn as mitts or open-fingertip gloves. A fleece lining keeps your hands warm when working with cold objects or in cold weather.

Use these sleeves alone or with gloves to protect your arms from welding sparks and spatter.

The coating on these gloves provides extra grip and protection without limiting dexterity. A fluorescent yellow back side makes them easy to spot.