Install these adhesive-back sheets to reduce noise from vibrating surfaces, such as duct and equipment housings.

Use these dust caps and plugs to keep contaminants out of your hose line.

Use these dust caps and plugs to keep contaminants out of your hose line.

Designed for intermittent handling of hot pipes, engine parts, and castings, these gloves protect your hands from moderate heat and some abrasion.

Use these pads to protect your hands from intermittent exposure to direct heat when handling hot items.

These thick, rigid bellows provide excellent durability.

Attach the cuff end with a hose clamp, and screw mount the flange end.

Attach the cuff end with a hose clamp, and screw mount the flange end.

Attach the cuff end with a hose clamp and screw mount the flange end.

Add cuff inserts to these flexible bellows for a custom fit.

Interlock bellows, mounting flanges, and links to create a custom-length bellows. These molded bellows are airtight to keep contaminants out.

Install these bellows over gas springs to protect their piston rods.

Enclose ball joint linkages to keep lubricants in and contaminants out.

Slide or zip these protectors around shocks and other moving parts to keep debris out of their seals.

Good for electroplating, paint baking, and powder-coating applications, these plugs withstand temperatures up to 570° F. All are tapered to fit a range of hole diameters.

Place a plug into an opening and tighten the wing nut—the sides expand to create a seal in holes of varying diameters. Good for paint baking and powder-coating applications, these plugs withstand temperatures up to 450° F.

Often used as laboratory stoppers, these rubber plugs have good impact and abrasion resistance. They’re tapered to fit a range of hole diameters.

These plugs have excellent chemical resistance for masking parts during chemical finishing applications such as plating and anodizing. Their tapered design fits a range of hole diameters.

Designed with a flange, these plugs protect countersunk holes during anodizing, electroplating, paint baking, and powder-coating applications. All withstand temperatures up to 600° F. Use the smaller end of the plug to pull the larger end into a through hole to form a tight seal.

These plugs have excellent chemical resistance for masking parts during chemical finishing applications such as plating and anodizing. Use the smaller end of the plug to pull the larger end into a through hole to form a tight seal.

With a compressible flanged top, these plugs are designed to seal the ends of copper tubing often used in water supply lines, refrigerant lines, and HVAC compressors. All are sized to fit standard copper tube dimensions.

Also known as capacitor boots, these caps protect capacitors and wire connections from damage to extend their service life. They also insulate wire terminal connections to help reduce accidental shocks.

Good for electroplating, paint baking, and powder-coating applications, these caps withstand temperatures up to 440° F or 570° F.

These caps have excellent chemical resistance for masking parts during chemical finishing applications such as plating and anodizing.

Drop, scrape, or spill on your robot teach pendants (also known as HMIs)—these protectors will guard them, preventing downtime due to damage.

Caps are watertight to protect hazardous location safe-break plugs when not in use.

Protect plugs and sockets in washdown environments when not in use.