Clear All
Voltage Voltage |
|---|
|
Capacity Capacity |
|---|
|
Battery Connection Type Battery Connection Type | Show |
|---|
|
Battery Connection Type Battery Connection Type | Hide |
|---|
Battery Size Battery Size |
|---|
|
Battery Chemistry Battery Chemistry |
|---|
|
System of Measurement System of Measurement |
|---|
|
Reserve Capacity Reserve Capacity |
|---|
|
Marine Cranking Amps Marine Cranking Amps |
|---|
|
Battery Type Battery Type |
|---|
|
Terminal Location Terminal Location |
|---|
 | D |
Manufacturer Equivalent Number ManufacturerEquivalent Number |
|---|
|
Width Width |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement)  |
|---|
Depth Depth |
|---|
|
Height Height |
|---|
|
About Battery Disposal
More
Large-Cell Batteries for Continuous Use
Threaded Stud Inside Post Connection
Terminal Location D
For use in floor-cleaning machines, lift trucks, personnel carriers, and other vehicles that require power over an extended time, these deep-cycle batteries can handle many charge/deep-discharge cycles. They are wet cell, so they contain electrolyte in an unsealed container and must be mounted upright. They may occasionally need to be filled with distilled water.
Reserve capacity is the number of minutes that a new, fully charged battery can continuously discharge at 25 amps at 80° F. Marine cranking amps is the maximum amps that a new, fully charged battery can continuously deliver for 30 seconds at 32° F.
Warning: Batteries should always be charged and discharged in a ventilated area.
| Voltage | Battery Size | Manufacturer Equivalent Number | Terminal Location | Capacity, amp-hrs. | Reserve Capacity, min. | Marine Cranking Amps | Thread Size | Ht. | Wd. | Dp. | Each | |
Wet-Cell Lead Acid | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Threaded Stud Inside Post | ||||||||||||
| 12V DC | 31 | 31M | D | 115 | 205 | 900 | 5/16"-18 (Negative Terminal), 3/8"-16 (Positive Terminal) | 9.4" | 13" | 6.8" | 00000000 | 0000000 |