For Battery Voltage For Battery Voltage | Show |
|---|
|
Battery Chemistry Battery Chemistry |
|---|
|
Battery Connection Type Battery Connection Type |
|---|
 | Clamp |
 | Ring Terminal |
 | Two-Pin SAE Connector |
 | North American Style Connector |
 | Sheathed Alligator Clip |
 | 12V Vehicle Plug |
For Battery Number For Battery Number |
|---|
Charging Current Charging Current |
|---|
|
|
|
Charger Number Charger Number |
|---|
|
|
For Battery Capacity For Battery Capacity |
|---|
|
Battery Connection Cord Length Battery ConnectionCord Length |
|---|
|
|
|
Input Voltage Input Voltage |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
Power Plug Type Power Plug Type |
|---|
|
Plug Type Plug Type |
|---|
|
Width Width |
|---|
|
|
|
About Battery Disposal
More
Chargers for Large-Cell Batteries
After the battery is fully charged, these chargers continuously provide a low-level charge to maintain the battery without overcharging.
Chargers with reverse-polarity protection prevent sparks and short circuits if the connectors touch or if they're not connected properly to the battery.
Chargers that cannot be sold to the regions listed are restricted by local energy efficiency regulations or product labeling requirements.
| For Battery Voltage | For Battery Cap., amp-hrs. | Charging Current, A | Battery Connection Type (Cord Lg.) | Power Plug Type | Power Cord Lg., ft. | Input Voltage | Ht. | Wd. | Dp. | Cannot Be Sold To | Each | |
Charge Status Indicator and Reverse-Polarity Protection | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 12/24 | 80-150 | 10 | Clamp (6 ft.) | Three Prong | 8 | 120V AC | 6 1/2" | 7" | 8" | CA, OR | 0000000 | 0000000 |
| 12/24 | 150-350 | 25 | Clamp (6 ft.) | Three Prong | 8 | 120V AC | 8 1/2" | 10" | 9 1/2" | CA | 0000000 | 000000 |
| For Lithium Type | For Battery Voltage | For Battery Cap., amp-hrs. | Charging Current, A | Battery Connection Type (Cord Lg.) | Power Plug Type | Power Cord Lg., ft. | Input Voltage | Ht. | Wd. | Dp. | Cannot Be Sold To | Each | |
Charge Status Indicator and Reverse-Polarity Protection | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lithium Iron Phosphate (LiFePO4) | 12/24 | 80-150 | 10 | Clamp (8 ft.) | Three Prong | 8 | 120V AC | 6 1/2" | 7" | 8" | CA, OR | 0000000 | 0000000 |
| Lithium Iron Phosphate (LiFePO4) | 12/24 | 150-350 | 25 | Clamp (8 ft.) | Three Prong | 8 | 120V AC | 6 1/2" | 7" | 8" | CA | 0000000 | 000000 |
| For Battery Voltage | For Battery Cap., amp-hrs. | Charging Current, A | Battery Connection Type (Cord Lg.) | Power Plug Type | Power Cord Lg., ft. | Input Voltage | Ht. | Wd. | Dp. | Each | |
Charge Status Indicator and Reverse-Polarity Protection | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 6/12 | 1.2-200 | 1.25 | Clamp (18"), 5/16" ID Ring Terminal (18"), Two-Pin SAE Connector (6 ft.) | Two Prong | 6 | 120V AC | 2" | 7" | 3 3/4" | 00000000 | 000000 |
| For Battery Voltage | For Battery Cap., amp-hrs. | Charging Current, A | Battery Connection Type (Cord Lg.) | Power Plug Type | Power Cord Lg., ft. | Input Voltage | Ht. | Wd. | Dp. | Each | |
Charge Status Indicator and Reverse-Polarity Protection | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 6/12 | 12-68 | 2, 10 | Clamp (7 ft.) | Two Prong | 7 | 120V AC | 7 3/4" | 10 1/2" | 3 3/4" | 000000 | 000000 |
| 12 | 13-100 | 20 | Clamp (6 ft.) | Three Prong | 6 | 120V AC | 11" | 8" | 6" | 000000 | 000000 |
| For Battery Voltage | For Battery Cap., amp-hrs. | Charging Current, A | Battery Connection Type (Cord Lg.) | Power Plug Type | Power Cord Lg., ft. | Input Voltage | Ht. | Wd. | Dp. | Each | |
Charge Status Indicator and Reverse-Polarity Protection | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 6/12 | 12-59 | 3, 6 | Clamp (7 ft.) | Two Prong | 7 | 120V AC | 7 3/8" | 10 1/4" | 3 1/4" | 0000000 | 000000 |
| Charger No. | For Battery No. | For Lithium Type | For Battery Voltage | Charging Current, A | Battery Connection Type (Cord Lg.) | Power Plug Type | Power Cord Lg., ft. | Input Voltage | Ht. | Wd. | Dp. | Cannot Be Sold To | Each | |
Charge Status Indicator | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| K2C12V4A03 | K2B12V7EB, K2B12V10EB, K2B12V19EB, K2B12VG27-2, K2B12VG27-3, K2B12VU1-1 | Lithium Iron Phosphate (LiFePO4) | 12 | 4 | Sheathed Alligator Clip (4 ft.) | Two Prong | 4 | 120V AC | 1 3/16" | 5 1/2" | 2 3/8" | CA | 000000 | 000000 |
Water-Resistant Chargers for Large-Cell Batteries
Charge batteries even in wet environments—a sealed housing keeps water out. They have reverse-polarity protection to prevent sparks and short circuits if the ring terminals touch or if they're not connected properly to the battery. After the battery is fully charged, they continuously provide a low-level charge to maintain the battery without overcharging.
Chargers that cannot be sold to California and Oregon are restricted by local energy efficiency regulations.
| For Battery Voltage | For Battery Cap., amp-hrs. | Charging Current, A | Battery Connection Type (Cord Lg.) | Power Plug Type | Power Cord Lg., ft. | Input Voltage | Ht. | Wd. | Dp. | Mounting Hole Dia. | Mounting Fasteners Included | Each | |
| 12/24 | 5-100 | 2.5, 5 | Two-Pin SAE Connector (4 ft.), 5/16" ID Ring Terminal (18") | Three Prong | 6 | 120V AC | 5 1/8" | 8 7/8" | 2" | 3/8" | No | 00000000 | 0000000 |
Mounting Holes | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Battery Voltage | For Battery Cap., amp-hrs. | Charging Current, A | Battery Connection Type (Cord Lg.) | Power Plug Type | Power Cord Lg., ft. | Input Voltage | Ht. | Wd. | Dp. | No. of | Dia. | Mounting Fasteners Included | Cannot Be Sold To | Each | |
| 12 | 150-350 | 25 | 3/8" ID Ring Terminal (6 ft.) | Three Prong | 2 | 120V AC | 6 1/2" | 6" | 9" | 4 | 3/8" | No | CA, OR | 0000000 | 0000000 |
| For Battery Voltage | For Battery Cap., amp-hrs. | Charging Current, A | Battery Connection Type (Cord Lg.) | Power Plug Type | Power Cord Lg., ft. | Input Voltage | Ht. | Wd. | Dp. | Each | |
| 12 | 72 | 6 | Clamp (4 ft.) | Three Prong | 6 | 120V AC | 3 1/2" | 5" | 2 3/8" | 0000000 | 0000000 |
Charger/Starters for Large-Cell Batteries
Wheel these charger/starters to batteries that need maintenance. They provide higher starting currents than Hand-Held Charger/Starters for Large-Cell Batteries. All have reverse-polarity protection to prevent sparks and short circuits if the clamps touch or if they're not connected properly to the battery.
Automatic charger/starters turn off when the battery is fully charged, but will continue to monitor the battery and turn back on if voltage drops.
Manual chargers can be set to continuously charge, or set to shut off automatically with a timer.
| For Battery Voltage | For Battery Cap., amp-hrs. | Charging Current, A | Starting Current, A | Battery Connection Type (Cord Lg.) | Features | Wheel Material | Power Plug Type | Power Cord Lg., ft. | Input Voltage | Ht. | Wd. | Dp. | Each | |
Automatic | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Dry-Cell AGM Lead Acid and Wet-Cell Lead Acid Batteries | ||||||||||||||
| 12 | 13-120 | 45 | 130 | Clamp (6 ft.) | Power Supply, Ammeter, Reverse-Polarity Protection | Rubber | Three Prong | 6 | 120V AC | 33" | 12" | 12" | 000000 | 0000000 |
Manual | ||||||||||||||
For Dry-Cell AGM Lead Acid and Wet-Cell Lead Acid Batteries | ||||||||||||||
| 6/12/24 | 20-200 | 30/65/70 | 280 | Clamp (7 ft.) | Continuous-Charge Setting, Ammeter, Reverse-Polarity Protection, 2-hour Timer | Plastic | Three Prong | 6 | 120V AC | 27" | 14" | 13" | 0000000 | 000000 |
For Wet-Cell Lead Acid Batteries | ||||||||||||||
| 6/12/18/24 | 20-200 | 40/50/80/100 | 400 | Clamp (8 ft.) | 1 1/2-hour Timer, Continuous-Charge Setting, Ammeter, Reverse-Polarity Protection | Plastic | Three Prong | 10 | 120V AC | 34" | 11 1/2" | 12" | 0000000 | 000000 |
Hand-Held Charger/Starters for Large-Cell Batteries
Small enough to carry, these charger/starters provide a 125-amp starting current. They have reverse-polarity protection to prevent sparks and short circuits if the clamps touch or if they're not connected properly to the battery. After the battery is fully charged, they continuously provide a low-level charge to maintain the battery without overcharging.
| For Battery Voltage | For Battery Cap., amp-hrs. | Charging Current, A | Starting Current, A | Battery Connection Type (Cord Lg.) | Features | Power Plug Type | Power Cord Lg., ft. | Input Voltage | Ht. | Wd. | Dp. | Each | |
For Dry-Cell AGM Lead Acid and Wet-Cell Lead Acid Batteries | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 6/12 | 12-150 | 6/15-40 | 125 | Clamp (12 ft.) | Charge Status Indicator, Reverse-Polarity Protection | Two Prong | 6 | 120V AC | 13" | 10 1/2" | 11 5/8" | 0000000 | 0000000 |
Stationary Chargers for Large-Cell Batteries
Bring batteries to these chargers for maintenance. To prevent overcharging, they automatically shut off when battery is fully charged.
| For Battery Voltage | For Battery Cap., amp-hrs. | Charging Current, A | Battery Connection Type (Cord Lg.) | Features | Power Plug Type | Power Cord Lg., ft. | Input Voltage | Ht. | Wd. | Dp. | Each | |
For Wet-Cell Lead Acid Batteries | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 12 | 240-300 | 30 | 175-amp North American Style Connector (8 ft.) | Charge Status Indicator, Ammeter | Three Prong | 7 | 120V AC | 12 3/16" | 7 1/2" | 5 1/2" | 0000000 | 0000000 |
Multiple-Battery Stationary Chargers for Large-Cell Batteries
Charge up to eight batteries at once. After the battery is fully charged, these chargers continuously provide a low-level charge to maintain the battery without overcharging.
| For Battery Voltage | For No. of Batteries | For Battery Cap. Range, amp-hrs. | Charging Current, A | Battery Connection Type (Cord Lg.) | Features | Power Plug Type | Power Cord Lg., ft. | Input Voltage | Ht. | Wd. | Dp. | Each | |
For Dry-Cell AGM Lead Acid and Wet-Cell Lead Acid Batteries | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 6/12 | 8 | 24/44-75 | 2-12 | Clamp (6 ft.) | Charge Status Indicator | Three Prong | 9 | 120V AC | 12 1/8" | 19 1/8" | 12" | 0000000 | 0000000 |
Hand-Held Starters for Large-Cell Batteries
Once fully charged, these starters store enough power to jump start a battery multiple times. All have reverse-polarity protection to prevent sparks and short circuits if the clamps touch or if they're not connected properly to a battery. They also have a USB port to charge mobile devices such as smartphones and tablets. To recharge, connect them to a USB port with the included cord.
Starters with a 12-volt vehicle plug can be charged in a vehicle outlet.
For 2,000A and 3,000A starters, use the adapter cord with the 12-volt vehicle socket to charge devices that require more power than what the USB cord delivers.
| For Battery Voltage | Cold Cranking Amps | Battery Connection Type (Cord Lg.) | Includes | Features | Battery Chemistry | Ht. | Wd. | Dp. | Each | |
For Dry-Cell AGM Lead Acid and Wet-Cell Lead Acid Batteries | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 12 | 500 | Clamp (2 ft.) | 3-ft. USB Cord | Charge Status Indicator, Reverse-Polarity Protection | Lithium Ion (Li-Ion) | 1 11/16" | 7 11/16" | 3 3/16" | 0000000 | 000000 |
| 12 | 1,000 | Clamp (2 ft.) | 3-ft. USB Cord, 3-ft. Cord with 12V Vehicle Plug | Charge Status Indicator, Reverse-Polarity Protection | Lithium Ion (Li-Ion) | 1 11/16" | 7 11/16" | 3 3/16" | 0000000 | 000000 |
| 12 | 2,000 | Clamp (2 ft.) | 3-ft. USB Cord, 12V Vehicle Plug, 2-ft. Adapter Cord, 12V Vehicle Socket | Charge Status Indicator, Reverse-Polarity Protection | Lithium Ion (Li-Ion) | 2 13/16" | 8 13/16" | 6" | 0000000 | 000000 |
| 12 | 3,000 | Clamp (2 ft.) | 3-ft. USB Cord, 12V Vehicle Plug, 2-ft. Adapter Cord, 12V Vehicle Socket | Charge Status Indicator, Reverse-Polarity Protection | Lithium Ion (Li-Ion) | 2 11/16" | 12 3/8" | 7 5/16" | 0000000 | 000000 |
Solar Panel Chargers for Large-Cell Batteries
Keep batteries charged even when electricity is unavailable. These chargers can be used in any battery capacity range.
Automatic chargers continuously provide a low-level charge to maintain the battery without overcharging.
Mounting Holes | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Battery Voltage | For Battery Cap., amp-hrs. | Charging Current, A | Output Wattage, W | Battery Connection Type (Cord Lg.) | No. of | Dia. | Mounting Fasteners Included | Includes | Backing Material | Ht. | Wd. | Dp. | Each | |
Rigid | ||||||||||||||
Automatic Chargers for Dry-Cell AGM Lead Acid and Wet-Cell Lead Acid Batteries | ||||||||||||||
| 12 | __ | 0.2 | 2.4 | Clamp (108"), 12V Vehicle Plug (108") | 4 | 0.11" | Yes | __ | __ | 19 3/8" | 10 1/4" | 1 3/8" | 00000000 | 000000 |
| 12 | __ | 0.4 | 4.8 | Clamp (132"), 12V Vehicle Plug (132") | 4 | 0.11" | Yes | __ | __ | 17 1/4" | 15" | 2 3/4" | 00000000 | 00000 |
Flexible | ||||||||||||||
Manual Chargers for Dry-Cell AGM Lead Acid and Wet-Cell Lead Acid Batteries | ||||||||||||||
| 12 | 2-50 | 0.45 | 7 | 5/16" ID Ring Terminal (15ft.), 3/8" ID Ring Terminal (15ft.) | 4 | 3/8" | No | 3-ft. Cord with 12V Vehicle Socket | Vinyl Plastic | 23" | 14 1/2" | 3/64" | 0000000 | 000000 |
| 12 | 5-100 | 0.9 | 14 | 5/16" ID Ring Terminal (15ft.), 3/8" ID Ring Terminal (15ft.) | 4 | 3/8" | No | 3-ft. Cord with 12V Vehicle Socket | Vinyl Plastic | 42" | 14 1/2" | 3/64" | 0000000 | 000000 |
| 5-ft. Power Cord with 12V Vehicle Plug for Flexible Chargers | 0000000 | Each | 000000 |
Chargers for DeWalt Cordless Tool Batteries
These chargers are for use with most DeWalt batteries, except Univolt batteries.
| Charger No. | For Battery No. | For Battery Voltage | For No. of Batteries | Charging Time, min. | Input Voltage | Plug Type | Cord Lg., ft. | Each | |
For Lithium Ion (Li-Ion) Batteries | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| DCB115 | DCB124, DCB127, DCB200, DCB201, DCB203, DCB204, DCB205, DCB205BT, DCB206, DCB230, DCB606, DCB609 | 12/14.4/18/20 | 1 | 60 | 120V AC | Two Prong | 6 | 000000000 | 000000 |
Chargers for Milwaukee Cordless Tool Batteries
These chargers are compatible only with Milwaukee batteries.
| Charger No. | For Battery No. | For Battery Voltage | For No. of Batteries | Charging Time, min. | Input Voltage | Plug Type | Cord Lg., ft. | Each | |
For Nickel Cadmium (NiCad) Batteries | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 48-59-0255 | 48-11-1024, 48-11-1970, 48-11-2230 | 12/14.4/18 | 1 | 60 | 120V AC | Two Prong | 6 | 00000000 | 000000 |
For Lithium Ion (Li-Ion) Batteries | |||||||||
| 48-59-1204 | 48-11-2401, 48-11-2402, 48-11-2420, 48-11-2430, 48-11-2440, 48-11-2460 | 12 | 4 | 60 | 120V AC | Two Prong | 6 | 000000000 | 000000 |
| 48-59-1807 | 48-11-1812, 48-11-1815, 48-11-1820, 48-11-1828, 48-11-1835, 48-11-1840, 48-11-1850, 48-11-1860, 48-11-1865, 48-11-1880, 48-11-1890, 48-11-2401, 48-11-2402, 48-11-2420, 48-11-2430, 48-11-2440, 48-11-2460 | 12/18 | 6 | 60 | 120V AC | Two Prong | 6 | 000000000 | 000000 |
| 48-59-1808 | 48-11-1812, 48-11-1815, 48-11-1820, 48-11-1828, 48-11-1835, 48-11-1840, 48-11-1850, 48-11-1860, 48-11-1865, 48-11-1880, 48-11-1890, 48-11-2401, 48-11-2402, 48-11-2420, 48-11-2430, 48-11-2440, 48-11-2460 | 12/18 | 2 | 60 | 120V AC | Two Prong | 6 | 000000000 | 00000 |
| 48-59-1812 | 2620-21, 2625-21, 2720-21, 48-11-1812, 48-11-1815, 48-11-1820, 48-11-1828, 48-11-1835, 48-11-1840, 48-11-1850, 48-11-1860, 48-11-1865, 48-11-1880, 48-11-1890, 48-11-2401, 48-11-2402, 48-11-2420, 48-11-2430, 48-11-2440, 48-11-2460 | 12/18 | 2 | 60 | 120V AC | Two Prong | 6 | 000000000 | 00000 |
| 48-59-2401 | 48-11-2401, 48-11-2402, 48-11-2420, 48-11-2430, 48-11-2440, 48-11-2460 | 12 | 1 | 60 | 120V AC | Two Prong | 6 | 0000000 | 00000 |
Chargers for Makita Cordless Tool Batteries
These chargers are compatible only with Makita batteries.
| Charger No. | For Battery No. | For Battery Voltage | For No. of Batteries | Charging Time, min. | Input Voltage | Plug Type | Cord Lg., ft. | Each | |
For Nickel Cadmium (NiCad) and Nickel Metal Hydride (NiMH) Batteries | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| DC1804 | 1200, 1210, 1220, 1222, 1234, 1422, 1434, 1435F, 1822, 1834, 1835F, 192019-4, 192271-4, 192534-A, 192596-6, 192598-2, 192600-1, 192638-6, 192681-5, 192827-3, 193156-7, 193157-5, 193158-3, 193159-1, 193195-1, 193782-2, 193784-8, 193890-9, 194172-2, 632277-5, 9034, 9100, 9102, 9120, 9122, 9134, B7000, B9000, PA14 | 7.2/9.6/12/14.4/18 | 1 | 60 | 120V AC | Two Prong | 2 | 00000000 | 000000 |
For Lithium Ion (Li-Ion) Batteries | |||||||||
| DC10WB | BL1014, BL7010 | 7.2/9.6/12 | 1 | 50 | 120V AC | Two Prong | 2 | 00000000 | 00000 |
Chargers for Bosch Cordless Tools
These chargers are compatible only with Bosch batteries.
| Charger No. | For Battery No. | For Battery Voltage | For No. of Batteries | Charging Time, min. | Input Voltage | Plug Type | Cord Lg., ft. | Each | |
For Lithium Ion (Li-Ion) Batteries | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| GAL12V-20 | BAT414, BAT415, BAT420, GBA12V60 | 12 | 1 | 60 | 120V AC | Two Prong | 5 | 0000000 | 000000 |
| GAX18V-30 | BAT414, BAT415, BAT420, BAT612, BAT620, BAT621, BAT622, GBA18V63 | 12/18 | 2 | 85 | 120V AC | Two Prong | 6 | 0000000 | 00000 |
| Bosch Battery No. GBA12V60 for Charger No. GAL 12V-20 | 00000000 | Each | 000000 |