For Cylinder ID For Cylinder ID |
|---|
For Use On For Use On |
|---|
|
|
Abrasive Material Abrasive Material |
|---|
|
Shank Style Shank Style |
|---|
|
Recommended Speed Recommended Speed |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement)  |
|---|
Shank Diameter Shank Diameter |
|---|
|
|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
For Finish For Finish |
|---|
|
About Finishing
More
Multipurpose Flexible Cylinder Hones
Abrasive-embedded balls at the ends of the flexible spindles press against the inside of a cylinder to remove material and leave a smooth, even finish. These hones are slightly oversized to maximize contact with the work surface. When your cylinder ID falls between two sizes, order the larger hone. Use with portable drills, drill presses, and CNC machines. Hones should be rotating when inserted into or removed from cylinders. We recommend using them with honing oil to keep the abrasive surface clean.
Grit is identified by the color on the hone tip.
Also Available: Hones made of boron carbide, alumina zirconia, levigated alumina, ceramic, and cubic boron nitride. Please order 4424A999 and specify abrasive, cylinder ID, and grit. Grit availability varies by abrasive.
For technical drawings and 3-D models, click on a part number.
| For Cylinder ID | Shank Dia. | Shank Hex Size | O'all Lg. | Abrasive Lg. | Recommended Speed, rpm | 120 Grit (Smooth) | 180 Grit (Smooth) Red | 240 Grit (Extra Smooth) Blue | 320 Grit (Extra Smooth) White | 600 Grit (Polished) Pink | 800 Grit (Polished) Light Blue | |
Silicon Carbide—For Use On Steel and Stainless Steel | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Twisted Wire Shank | ||||||||||||
| 3/16" | 0.073" | __ | 6" | 3/4" | 1,000-1,200 | 00000000 | ||||||
| 1/4" | 0.112" | __ | 8" | 1 1/2" | 1,000-1,200 | 00000000 | ||||||
| 1/2" | 0.168" | __ | 8" | 2 1/2" | 900-1,000 | 00000000 | ||||||
| 5/8" | 0.19" | __ | 8" | 2 1/2" | 900-1,000 | 00000000 | ||||||
| 3/4" | 0.19" | __ | 8" | 2 1/2" | 900-1,000 | 00000000 | ||||||
| 7/8" | 0.22" | __ | 8" | 3" | 900-1,000 | 00000000 | ||||||
| 15/16" | 0.22" | __ | 8" | 3" | 900-1,000 | 00000000 | ||||||
| 1" | 0.22" | __ | 8" | 3" | 900-1,000 | 00000000 | ||||||
| 1 1/8" | 0.245" | __ | 8" | 3" | 900-1,000 | 00000000 | ||||||
| 1 1/4" | 0.245" | __ | 8" | 3" | 900-1,000 | 00000000 | ||||||
| 1 3/8" | 0.245" | __ | 8" | 3" | 900-1,000 | 00000000 | ||||||
| 1 1/2" | 0.245" | __ | 8" | 3" | 900-1,000 | 00000000 | ||||||
| 1 5/8" | 0.245" | __ | 8" | 3" | 900-1,000 | 00000000 | ||||||
| 1 3/4" | 0.245" | __ | 8" | 3" | 900-1,000 | 00000000 | ||||||
| 1 7/8" | 0.245" | __ | 8" | 3" | 900-1,000 | 00000000 | ||||||
| 2" | 0.245" | __ | 8" | 3" | 600-900 | 00000000 | ||||||
| 2 1/8" | 0.245" | __ | 5" | 1 1/2" | 600-900 | 00000000 | ||||||
| 2 1/8" | 0.245" | __ | 8" | 3" | 600-900 | 00000000 | ||||||
| 2 1/4" | 0.245" | __ | 8" | 3" | 600-900 | 00000000 | ||||||
| 2 3/8" | 0.245" | __ | 8" | 3" | 600-900 | 00000000 | ||||||
| 2 1/2" | 0.245" | __ | 5" | 1 1/2" | 600-900 | 00000000 | ||||||
| 2 1/2" | 0.245" | __ | 8" | 3" | 600-900 | 00000000 | ||||||
| 2 5/8" | 0.245" | __ | 8" | 3" | 600-900 | 00000000 | ||||||
| 2 3/4" | 0.245" | __ | 8" | 3" | 600-900 | 00000000 | ||||||
| 2 7/8" | 0.245" | __ | 8" | 3" | 600-900 | 00000000 | ||||||
| 3" | 0.245" | __ | 8" | 3" | 600-900 | 00000000 | ||||||
| 3 1/8" | 0.245" | __ | 5" | 1 1/2" | 600-900 | 00000000 | ||||||
| 3 1/4" | 0.31" | __ | 13 1/2" | 3 1/2" | 600-900 | 00000000 | ||||||
| 3 1/2" | 0.31" | __ | 13 1/2" | 3 1/2" | 600-900 | 00000000 | ||||||
| 3 3/4" | 0.31" | __ | 13 1/2" | 3 1/2" | 600-900 | 00000000 | ||||||
| 4" | 0.31" | __ | 13 1/2" | 6" | 350-600 | 00000000 | ||||||
| 4 1/8" | 0.31" | __ | 13 1/2" | 4" | 350-600 | 00000000 | ||||||
| 4 1/4" | 0.31" | __ | 13 1/2" | 6" | 350-600 | 00000000 | ||||||
| 4 1/2" | 0.31" | __ | 13 1/2" | 6" | 350-600 | 00000000 | ||||||
| 4 5/8" | 0.31" | __ | 13 1/2" | 4" | 350-600 | 00000000 | ||||||
| 5" | 0.35" | __ | 17 1/2" | 6" | 350-600 | 00000000 | ||||||
| 5 1/2" | 0.35" | __ | 17 1/2" | 6" | 350-600 | 00000000 | ||||||
| 6" | 0.42" | __ | 17 1/2" | 6 1/4" | 350-600 | 00000000 | ||||||
| 6 1/2" | 0.42" | __ | 17 1/2" | 6 1/4" | 350-600 | 00000000 | ||||||
| 7" | 0.42" | __ | 17 1/2" | 7" | 350-600 | 00000000 | ||||||
| 8" | 0.42" | __ | 17 1/2" | 7 1/4" | 225-300 | 00000000 | ||||||
| 4mm | 0.055" | __ | 6" | 3/4" | 1,000-1,200 | 00000000 | ||||||
| 4.5mm | 0.055" | __ | 6" | 3/4" | 1,000-1,200 | 00000000 | ||||||
| 5mm | 0.083" | __ | 8" | 1 1/2" | 1,000-1,200 | 00000000 | ||||||
| 5.5mm | 0.083" | __ | 8" | 1 1/2" | 1,000-1,200 | 00000000 | ||||||
| 6mm | 0.112" | __ | 8" | 1 1/2" | 1,000-1,200 | 00000000 | ||||||
| 6.4mm | 0.112" | __ | 8" | 1 1/2" | 1,000-1,200 | 00000000 | ||||||
| 7mm | 0.125" | __ | 8" | 2" | 1,000-1,200 | 00000000 | ||||||
| 8mm | 0.14" | __ | 8" | 2" | 1,000-1,200 | 00000000 | ||||||
| 9mm | 0.14" | __ | 8" | 2" | 1,000-1,200 | 00000000 | ||||||
| 9.5mm | 0.14" | __ | 8" | 2" | 1,000-1,200 | 00000000 | ||||||
| 10mm | 0.14" | __ | 8" | 2" | 1,000-1,200 | 00000000 | ||||||
| 11mm | 0.14" | __ | 8" | 2" | 1,000-1,200 | 00000000 | ||||||
| 12mm | 0.168" | __ | 8" | 2 1/2" | 1,000-1,200 | 00000000 | ||||||
| 14mm | 0.19" | __ | 8" | 2 1/2" | 900-1,000 | 00000000 | ||||||
| 18mm | 0.19" | __ | 8" | 2 1/2" | 900-1,000 | 00000000 | ||||||
| 20mm | 0.19" | __ | 8" | 2 1/2" | 900-1,000 | 00000000 | ||||||
Hex Shank | ||||||||||||
| 9" | __ | 0.5" | 34" | 8" | 225-300 | 00000000 | ||||||
| 10" | __ | 0.5" | 34" | 8" | 225-300 | 00000000 | ||||||
| 11" | __ | 0.5" | 34" | 9" | 225-300 | 00000000 | ||||||
| 12" | __ | 0.5" | 34" | 9" | 125-200 | 00000000 | ||||||
| 13" | __ | 0.625" | 34" | 10" | 125-200 | 00000000 | ||||||
| 14" | __ | 0.625" | 34" | 10" | 125-200 | 00000000 | ||||||
| 15" | __ | 0.625" | 34" | 12" | 125-200 | 00000000 | ||||||
| 16" | __ | 0.625" | 34" | 12" | 125-200 | 00000000 | ||||||
| 17" | __ | 0.625" | 34" | 12" | 125-200 | 00000000 | ||||||
| 18" | __ | 0.625" | 34" | 12" | 125-200 | 00000000 | ||||||
Flexible Cylinder Hones for Aluminum and Soft Metals
The abrasive won’t clog, especially when used with honing oil. It’s embedded in balls at the ends of flexible spindles that press against the inside of a cylinder to remove material and leave a smooth, even finish. These hones are slightly oversized to maximize contact with the work surface. When your cylinder ID falls between two sizes, order the larger hone. Use with portable drills, drill presses, and CNC machines. Hones should be rotating when inserted into or removed from cylinders. We recommend using them with honing oil to keep the abrasive surface clean.
Grit is identified by the color on the hone tip.
Also Available: Hones made of boron carbide, alumina zirconia, levigated alumina, ceramic, and cubic boron nitride. Please order 4424A999 and specify abrasive, cylinder ID, and grit. Grit availability varies by abrasive.
For technical drawings and 3-D models, click on a part number.
| For Cylinder ID | Shank Dia. | Shank Hex Size | O'all Lg. | Abrasive Lg. | Recommended Speed, rpm | 120 Grit (Smooth) | 180 Grit (Smooth) Red | 240 Grit (Extra Smooth) Blue | 320 Grit (Extra Smooth) White | 600 Grit (Polished) Pink | 800 Grit (Polished) Light Blue | |
Aluminum Oxide—For Use On Aluminum, Brass, Bronze, and Copper | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Twisted Wire Shank | ||||||||||||
| 3/16" | 0.073" | __ | 6" | 3/4" | 1,000-1,200 | 00000000 | ||||||
| 1/4" | 0.112" | __ | 8" | 1 1/2" | 1,000-1,200 | 00000000 | ||||||
| 1/2" | 0.168" | __ | 8" | 2 1/2" | 900-1,000 | 00000000 | ||||||
| 5/8" | 0.19" | __ | 8" | 2 1/2" | 900-1,000 | 00000000 | ||||||
| 3/4" | 0.19" | __ | 8" | 2 1/2" | 900-1,000 | 00000000 | ||||||
| 7/8" | 0.22" | __ | 8" | 3" | 900-1,000 | 00000000 | ||||||
| 15/16" | 0.22" | __ | 8" | 3" | 900-1,000 | 00000000 | ||||||
| 1" | 0.22" | __ | 8" | 3" | 900-1,000 | 00000000 | ||||||
| 1 1/8" | 0.245" | __ | 8" | 3" | 900-1,000 | 00000000 | ||||||
| 1 1/4" | 0.245" | __ | 8" | 3" | 900-1,000 | 00000000 | ||||||
| 1 3/8" | 0.245" | __ | 8" | 3" | 900-1,000 | 00000000 | ||||||
| 1 1/2" | 0.245" | __ | 8" | 3" | 900-1,000 | 00000000 | ||||||
| 1 5/8" | 0.245" | __ | 8" | 3" | 900-1,000 | 00000000 | ||||||
| 1 3/4" | 0.245" | __ | 8" | 3" | 900-1,000 | 00000000 | ||||||
| 1 7/8" | 0.245" | __ | 8" | 3" | 900-1,000 | 00000000 | ||||||
| 2" | 0.245" | __ | 8" | 3" | 600-900 | 00000000 | ||||||
| 2 1/8" | 0.245" | __ | 5" | 1 1/2" | 600-900 | 00000000 | ||||||
| 2 1/8" | 0.245" | __ | 8" | 3" | 600-900 | 00000000 | ||||||
| 2 1/4" | 0.245" | __ | 8" | 3" | 600-900 | 00000000 | ||||||
| 2 3/8" | 0.245" | __ | 8" | 3" | 600-900 | 00000000 | ||||||
| 2 1/2" | 0.245" | __ | 5" | 1 1/2" | 600-900 | 00000000 | ||||||
| 2 1/2" | 0.245" | __ | 8" | 3" | 600-900 | 00000000 | ||||||
| 2 5/8" | 0.245" | __ | 8" | 3" | 600-900 | 00000000 | ||||||
| 2 3/4" | 0.245" | __ | 8" | 3" | 600-900 | 00000000 | ||||||
| 2 7/8" | 0.245" | __ | 8" | 3" | 600-900 | 00000000 | ||||||
| 3" | 0.245" | __ | 8" | 3" | 600-900 | 00000000 | ||||||
| 3 1/8" | 0.245" | __ | 5" | 1 1/2" | 600-900 | 00000000 | ||||||
| 3 1/4" | 0.31" | __ | 13 1/2" | 3 1/2" | 600-900 | 00000000 | ||||||
| 3 1/2" | 0.31" | __ | 13 1/2" | 3 1/2" | 600-900 | 00000000 | ||||||
| 3 3/4" | 0.31" | __ | 13 1/2" | 3 1/2" | 600-900 | 00000000 | ||||||
| 4" | 0.31" | __ | 13 1/2" | 6" | 350-600 | 00000000 | ||||||
| 4 1/8" | 0.31" | __ | 13 1/2" | 4" | 350-600 | 00000000 | ||||||
| 4 1/4" | 0.31" | __ | 13 1/2" | 6" | 350-600 | 00000000 | ||||||
| 4 1/2" | 0.31" | __ | 13 1/2" | 6" | 350-600 | 00000000 | ||||||
| 4 5/8" | 0.31" | __ | 13 1/2" | 4" | 350-600 | 00000000 | ||||||
| 5" | 0.35" | __ | 17 1/2" | 6" | 350-600 | 00000000 | ||||||
| 5 1/2" | 0.35" | __ | 17 1/2" | 6" | 350-600 | 00000000 | ||||||
| 6" | 0.42" | __ | 17 1/2" | 6 1/4" | 350-600 | 00000000 | ||||||
| 6 1/2" | 0.42" | __ | 17 1/2" | 6 1/4" | 350-600 | 00000000 | ||||||
| 7" | 0.42" | __ | 17 1/2" | 7" | 350-600 | 00000000 | ||||||
| 8" | 0.42" | __ | 17 1/2" | 7 1/4" | 225-300 | 00000000 | ||||||
| 4mm | 0.055" | __ | 6" | 3/4" | 1,000-1,200 | 00000000 | ||||||
| 4.5mm | 0.055" | __ | 6" | 3/4" | 1,000-1,200 | 00000000 | ||||||
| 5mm | 0.083" | __ | 8" | 1 1/2" | 1,000-1,200 | 00000000 | ||||||
| 5.5mm | 0.083" | __ | 8" | 1 1/2" | 1,000-1,200 | 00000000 | ||||||
| 6mm | 0.112" | __ | 8" | 1 1/2" | 1,000-1,200 | 00000000 | ||||||
| 6.4mm | 0.112" | __ | 8" | 1 1/2" | 1,000-1,200 | 00000000 | ||||||
| 7mm | 0.125" | __ | 8" | 2" | 1,000-1,200 | 00000000 | ||||||
| 8mm | 0.14" | __ | 8" | 2" | 1,000-1,200 | 00000000 | ||||||
| 9mm | 0.14" | __ | 8" | 2" | 1,000-1,200 | 00000000 | ||||||
| 9.5mm | 0.14" | __ | 8" | 2" | 1,000-1,200 | 00000000 | ||||||
| 10mm | 0.14" | __ | 8" | 2" | 1,000-1,200 | 00000000 | ||||||
| 11mm | 0.14" | __ | 8" | 2" | 1,000-1,200 | 00000000 | ||||||
| 12mm | 0.168" | __ | 8" | 2 1/2" | 1,000-1,200 | 00000000 | ||||||
| 14mm | 0.19" | __ | 8" | 2 1/2" | 900-1,000 | 00000000 | ||||||
| 18mm | 0.19" | __ | 8" | 2 1/2" | 900-1,000 | 00000000 | ||||||
| 20mm | 0.19" | __ | 8" | 2 1/2" | 900-1,000 | 00000000 | ||||||
Hex Shank | ||||||||||||
| 9" | __ | 0.5" | 34" | 8" | 225-300 | 00000000 | ||||||
| 10" | __ | 0.5" | 34" | 8" | 225-300 | 00000000 | ||||||
| 11" | __ | 0.5" | 34" | 9" | 225-300 | 00000000 | ||||||
| 12" | __ | 0.5" | 34" | 9" | 125-200 | 00000000 | ||||||
| 13" | __ | 0.625" | 34" | 10" | 125-200 | 00000000 | ||||||
| 14" | __ | 0.625" | 34" | 10" | 125-200 | 00000000 | ||||||
| 15" | __ | 0.625" | 34" | 12" | 125-200 | 00000000 | ||||||
| 16" | __ | 0.625" | 34" | 12" | 125-200 | 00000000 | ||||||
| 17" | __ | 0.625" | 34" | 12" | 125-200 | 00000000 | ||||||
| 18" | __ | 0.625" | 34" | 12" | 125-200 | 00000000 | ||||||
Flexible Cylinder Hones for Hard Metals
A long-lasting diamond abrasive is embedded in balls at the ends of flexible spindles that press against the inside of a cylinder to remove material and leave a smooth, even finish. These hones are slightly oversized to maximize contact with the work surface. When your cylinder ID falls between two sizes, order the larger hone. Use with portable drills, drill presses, and CNC machines. Hones should be rotating when inserted into or removed from cylinders. We recommend using them with honing oil to keep the abrasive surface clean.
Abrasive material is identified by the color on the stem.
Grit is approximate and identified by the color on the hone tip.
Also Available: Hones made of boron carbide, alumina zirconia, levigated alumina, ceramic, and cubic boron nitride. Please order 4424A999 and specify abrasive, cylinder ID, and grit. Grit availability varies by abrasive.
For technical drawings and 3-D models, click on a part number.
| For Cylinder ID | Shank Dia. | O'all Lg. | Abrasive Lg. | Recommended Speed, rpm | 180 Grit (Smooth) Red | 400 Grit (Extra Smooth) Yellow | 800 Grit (Polished) Light Blue | |
Diamond (Yellow)—For Use On Hardened Steel, Titanium, Iron, and Nickel | ||||||||
|---|---|---|---|---|---|---|---|---|
Twisted Wire Shank | ||||||||
| 3/16" | 0.073" | 6" | 3/4" | 1,000-1,200 | 0000000 | |||
| 1/4" | 0.112" | 8" | 1 1/2" | 1,000-1,200 | 0000000 | |||
| 1/2" | 0.168" | 8" | 3/4" | 900-1,000 | 0000000 | |||
| 5/8" | 0.19" | 8" | 2 1/2" | 900-1,000 | 0000000 | |||
| 3/4" | 0.19" | 8" | 2 1/2" | 900-1,000 | 0000000 | |||
| 7/8" | 0.22" | 8" | 3" | 900-1,000 | 0000000 | |||
| 15/16" | 0.22" | 8" | 3" | 900-1,000 | 0000000 | |||
| 1" | 0.22" | 8" | 3" | 900-1,000 | 0000000 | |||
| 1 1/8" | 0.245" | 8" | 3" | 900-1,000 | 0000000 | |||
| 1 1/4" | 0.245" | 8" | 3" | 900-1,000 | 0000000 | |||
| 1 3/8" | 0.245" | 8" | 3" | 900-1,000 | 0000000 | |||
| 1 1/2" | 0.245" | 8" | 3" | 900-1,000 | 0000000 | |||
| 4mm | 0.055" | 6" | 3/4" | 1,000-1,200 | 0000000 | |||
| 4.5mm | 0.055" | 6" | 3/4" | 1,000-1,200 | 0000000 | |||
| 5mm | 0.083" | 8" | 1 1/2" | 1,000-1,200 | 0000000 | |||
| 5.5mm | 0.083" | 8" | 1 1/2" | 1,000-1,200 | 0000000 | |||
| 6mm | 0.112" | 8" | 1 1/2" | 1,000-1,200 | 0000000 | |||
| 6.4mm | 0.112" | 8" | 1 1/2" | 1,000-1,200 | 0000000 | |||
| 7mm | 0.125" | 8" | 2" | 1,000-1,200 | 0000000 | |||
| 8mm | 0.14" | 8" | 2" | 1,000-1,200 | 0000000 | |||
| 9mm | 0.14" | 8" | 2" | 1,000-1,200 | 0000000 | |||
| 9.5mm | 0.14" | 8" | 2" | 1,000-1,200 | 0000000 | |||
| 10mm | 0.14" | 8" | 2" | 1,000-1,200 | 0000000 | |||
| 11mm | 0.14" | 8" | 2" | 1,000-1,200 | 0000000 | |||
| 12mm | 0.168" | 8" | 2 1/2" | 1,000-1,200 | 0000000 | |||
| 14mm | 0.19" | 8" | 2 1/2" | 900-1,000 | 0000000 | |||
| 18mm | 0.19" | 8" | 2 1/2" | 900-1,000 | 0000000 | |||
| 20mm | 0.19" | 8" | 2 1/2" | 900-1,000 | 0000000 | |||
Flexible Precision-Finish Cylinder Hones
The flexible shank on these hones gives you access to hard-to-reach spots. A knurled adjustment knob lets you adjust the pressure applied to the side of the cylinder to achieve your desired finish. The square end can hone to the bottom of step-cut and closed-end holes. Use on portable drills. We recommend using them with honing oil to keep the abrasive surface clean.
For technical drawings and 3-D models, click on a part number.
Cylinder Hones | Replacement Stones | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Cylinder ID | Grit (For Finish) | Shank Dia. | O'all Lg. | Abrasive Lg. | Recommended Speed, rpm | No. of Stones | Each | Includes | Choose a Grit (For Finish) | Each | ||
Silicon Carbide—For Use On Steel, Stainless Steel, Titanium, Iron, Aluminum, Brass, Bronze, Copper, and Nickel | ||||||||||||
| 11/16"-2 1/2" | 220 (Smooth) | 0.25" | 8" | 1 1/8" | 1,500 | 2 | 0000000 | 000000 | Two Stones | 220 (Smooth) | 0000000 | 00000 |
| 27/32"-2" | 220 (Smooth) | 0.25" | 8" | 1 1/8" | 1,500 | 3 | 0000000 | 00000 | Three Stones | 220 (Smooth) | 0000000 | 0000 |
| 1 1/2"-3 1/8" | 400 (Extra Smooth) | 0.25" | 8" | 1" | 1,500 | 3 | 0000000 | 00000 | Three Stones | 400 (Extra Smooth) | 0000000 | 0000 |
| 2"-7" | 220 (Smooth) | 0.25" | 13" | 3" | 1,200 | 3 | 0000000 | 00000 | Three Stones | 0000000 | 0000 | |
Precision-Finish Cylinder Hones
Precisely size the hone to your cylinder in micrometer increments. Clip two stones and two felt cleaning wipers onto the four holders and use with portable drills. We recommend using them with honing oil to keep the abrasive surface clean.
| For Cylinder ID | Shank Dia. | O'all Lg. | Abrasive Lg. | Recommended Speed, rpm | No. of Stones | Includes | Each | |
| 1 3/4"-2 3/4" | 0.5" | 14" | 3 1/2" | 750 | 6 | Six Smooth-Finish (180 Grit) Stones Four Holders Six Wipers | 0000000 | 0000000 |
| 3"-4 1/4" | 0.5" | 17" | 5" | 500 | 4 | Two Rough-Finish (80 Grit) Stones Two Smooth-Finish (180 Grit) Stones Four Holders Four Wipers One 1/2" Dia. Driver Extension | 0000000 | 000000 |
| For Cylinder ID | Abrasive Lg. | No. of Pieces | Includes | Each | |
80 Grit (Rough) | |||||
|---|---|---|---|---|---|
Silicon Carbide | |||||
| 1 3/4"-2 7/32" | 3 1/2" | 4 | Two Stones, Two Wipers | 0000000 | 000000 |
| 2"-2 1/2" | 3 1/2" | 4 | Two Stones, Two Wipers | 0000000 | 00000 |
| 2 11/32"-2 3/4" | 3 1/2" | 4 | Two Stones, Two Wipers | 0000000 | 00000 |
| 2 3/4"-3 3/4" | 5" | 4 | Two Stones, Two Wipers | 0000000 | 00000 |
| 3"-10 1/4" | 5" | 4 | Two Stones, Two Wipers | 0000000 | 00000 |
180 Grit (Smooth) | |||||
Silicon Carbide | |||||
| 1 3/4"-2 7/32" | 3 1/2" | 4 | Two Stones, Two Wipers | 0000000 | 00000 |
| 2"-2 1/2" | 3 1/2" | 4 | Two Stones, Two Wipers | 0000000 | 00000 |
| 2 11/32"-2 3/4" | 3 1/2" | 4 | Two Stones, Two Wipers | 0000000 | 00000 |
| 2 3/4"-3 3/4" | 5" | 4 | Two Stones, Two Wipers | 0000000 | 00000 |
| 3"-10 1/4" | 5" | 4 | Two Stones, Two Wipers | 0000000 | 00000 |
280 Grit (Extra Smooth) | |||||
Silicon Carbide | |||||
| 1 3/4"-2 7/32" | 3 1/2" | 4 | Two Stones, Two Wipers | 0000000 | 00000 |
| 2"-2 1/2" | 3 1/2" | 4 | Two Stones, Two Wipers | 0000000 | 00000 |
| 2 11/32"-2 3/4" | 3 1/2" | 4 | Two Stones, Two Wipers | 0000000 | 00000 |
| 2 3/4"-3 3/4" | 5" | 4 | Two Stones, Two Wipers | 0000000 | 00000 |
| 3"-10 1/4" | 5" | 4 | Two Stones, Two Wipers | 0000000 | 00000 |
500 Grit (Polished) | |||||
Silicon Carbide | |||||
| 3"-10 1/4" | 5" | 4 | Two Stones, Two Wipers | 0000000 | 00000 |
| For Cylinder ID | No. of Pieces | Includes | Each | |
| 2 3/4"-3 3/4" | 4 | Two Holders for Stones Two Holders for Wipers | 0000000 | 000000 |
| 3"-4 1/4" | 4 | Two Holders for Stones Two Holders for Wipers | 0000000 | 00000 |
| 4"-6 1/4" | 4 | Two Holders for Stones Two Holders for Wipers | 0000000 | 00000 |
| 6 1/8"-10 1/4" | 4 | Two Holders for Stones Two Holders for Wipers | 0000000 | 00000 |