Metric Beams | McMaster-Carr

Filter by

System of Measurement

Shape

Outside Height

Wall Thickness

Outside Width

Material

Inside Corner Shape

Length

Inside Height

Inside Width

Appearance

Outside Corner Shape

Leg Edge Shape

For Beam Shape

Beam Width

Weight Capacity

1,000 lb. to 1,999 lb.

2,000 lb. to 9,999 lb.

10,000 lb. to 19,999 lb.

Fabrication

Application

Specifications Met

REACH

RoHS

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

Elongation

Maximum Temperature

Power Source

38 Products

Low-Carbon Steel 90° Angles

Yield Strength: 36,000 psi
Hardness: Not Rated
Heat Treatable: See Table
Max. Hardness After Heat Treatment: Not Rated
Fabrication: Hot Rolled
Specifications Met: See Table

Also known as mild steel, low-carbon steel is easy to machine, form, and weld. It's widely fabricated into parts that don’t require high strength, such as frames, supports, and edge protectors. These 90° angles meet either ASTM A36 or EN 10025-2 standards for performance and quality.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

Outside		Inside
Ht.	Wd.	Ht.	Wd.	Heat Treatable	Specifications Met		1 ft. Lg.	3 ft. Lg.	6 ft. Lg.
3mm Wall Thick.
30mm	30mm	27mm	27mm	No	EN 10025-2	0000000	000000	000000	0000000
4mm Wall Thick.
40mm	40mm	36mm	36mm	No	EN 10025-2	0000000	00000	00000	000000
5mm Wall Thick.
50mm	50mm	45mm	45mm	No	EN 10025-2	0000000	00000	000000	000000
6mm Wall Thick.
40mm	40mm	34mm	34mm	No	EN 10025-2	0000000	00000	000000	000000
70mm	70mm	64mm	64mm	No	EN 10025-2	0000000	00000	000000	000000

Anodized Architectural 6063 Aluminum 90° Angles

Yield Strength: 16,000 psi
Hardness: Brinell 60 (Soft)
Temper: T5
Fabrication: Extruded
Specifications Met: ASTM B221

The anodized coating on these 90° angles forms a bond with the aluminum surface to improve wear and corrosion resistance. Often called decorative anodize, it provides a uniform finish that readily accepts paint and adhesive. More corrosion resistant and easier to form than multipurpose 6061 aluminum, 6063 is primarily used for exterior railings, decorative trim, and door frames.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

With Square Inside Corner and Leg Edge

Outside				Inside
Ht.	Ht. Tolerance	Wd.	Wd. Tolerance	Ht.	Wd.	Heat Treatment	Finish Color	Temp. Range, °F	Straightness Tolerance		Each
2 ft. Length
1mm Wall Thick. (-0.178mm to 0.178mm Tolerance)
10mm	-0.152mm to 0.152mm	10mm	-0.152mm to 0.152mm	9.00mm	9.00mm	Hardened	Clear	-320° to 212°	0.050" per ft.	00000000	00000
15mm	-0.177mm to 0.177mm	15mm	-0.177mm to 0.177mm	9.00mm	14.00mm	Hardened	Clear	-320° to 212°	0.050" per ft.	00000000	0000
20mm	-0.177mm to 0.177mm	20mm	-0.177mm to 0.177mm	19.00mm	19.00mm	Hardened	Clear	-320° to 212°	0.050" per ft.	00000000	0000
20mm	-0.177mm to 0.177mm	40mm	-0.177mm to 0.177mm	19.00mm	39.00mm	Hardened	Clear	-320° to 212°	0.050" per ft.	00000000	00000
2mm Wall Thick. (-0.178mm to 0.178mm Tolerance)
15mm	-0.203mm to 0.203mm	15mm	-0.203mm to 0.203mm	13.00mm	13.00mm	Hardened	Clear	-320° to 212°	0.050" per ft.	00000000	00000
15mm	-0.203mm to 0.203mm	30mm	-0.203mm to 0.203mm	13.00mm	13.00mm	Hardened	Clear	-320° to 212°	0.050" per ft.	00000000	00000
20mm	-0.203mm to 0.203mm	20mm	-0.203mm to 0.203mm	18.00mm	18.00mm	Hardened	Clear	-320° to 212°	0.050" per ft.	00000000	00000
25mm	-0.203mm to 0.203mm	50mm	-0.203mm to 0.203mm	23.00mm	48.00mm	Hardened	Clear	-320° to 212°	0.050" per ft.	00000000	00000
50mm	-0.203mm to 0.203mm	50mm	-0.203mm to 0.203mm	48.00mm	48.00mm	Hardened	Clear	-320° to 212°	0.050" per ft.	00000000	00000
3mm Wall Thick. (-0.178mm to 0.178mm Tolerance)
30mm	-0.228mm to 0.228mm	30mm	-0.228mm to 0.228mm	27.00mm	27.00mm	Hardened	Clear	-320° to 212°	0.050" per ft.	00000000	00000
50mm	-0.228mm to 0.228mm	50mm	-0.228mm to 0.228mm	47.00mm	47.00mm	Hardened	Clear	-320° to 212°	0.050" per ft.	00000000	00000
6 ft. Length
1mm Wall Thick. (-0.178mm to 0.178mm Tolerance)
5mm	-0.177mm to 0.177mm	5mm	-0.177mm to 0.177mm	4.00mm	4.00mm	Hardened	Clear	-320° to 212°	0.050" per ft.	00000000	00000
10mm	-0.177mm to 0.177mm	10mm	-0.177mm to 0.177mm	9.00mm	9.00mm	Hardened	Clear	-320° to 212°	0.050" per ft.	00000000	00000
15mm	-0.177mm to 0.177mm	15mm	-0.177mm to 0.177mm	14.00mm	14.00mm	Hardened	Clear	-320° to 212°	0.050" per ft.	00000000	00000
2mm Wall Thick. (-0.178mm to 0.178mm Tolerance)
10mm	-0.203mm to 0.203mm	20mm	-0.203mm to 0.203mm	8.00mm	18.00mm	Hardened	Clear	-320° to 212°	0.050" per ft.	00000000	00000
15mm	-0.203mm to 0.203mm	15mm	-0.203mm to 0.203mm	13.00mm	13.00mm	Hardened	Clear	-320° to 212°	0.050" per ft.	00000000	00000
20mm	-0.203mm to 0.203mm	40mm	-0.203mm to 0.203mm	18.00mm	38.00mm	Hardened	Clear	-320° to 212°	0.050" per ft.	00000000	00000
3mm Wall Thick. (-0.178mm to 0.178mm Tolerance)
25mm	-0.228mm to 0.228mm	50mm	-0.228mm to 0.228mm	22.00mm	47.00mm	Hardened	Clear	-320° to 212°	0.050" per ft.	00000000	00000
30mm	-0.228mm to 0.228mm	30mm	-0.228mm to 0.228mm	27.00mm	27.00mm	Hardened	Clear	-320° to 212°	0.050" per ft.	00000000	00000

Easy-to-Form 6060 Aluminum

Yield Strength: 21,000 psi
Hardness: Brinell 65 (Soft)
Temper: T66
Fabrication: Extruded

Easier to bend and shape than 6061 aluminum, this aluminum is good for framing, cross sections, and structures in construction and marine industries. It’s corrosion resistant as well as easy to machine and weld. It can also be anodized to create a durable, decorative finish.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

Outside				Inside
Height, mm	Height Tolerance Range, mm	Width, mm	Width Tolerance Range, mm	Height, mm	Width, mm	Heat Treatment	Straightness Tolerance		1 ft. Lg.	3 ft. Lg.	6 ft. Lg.
15	-0.3 to 0.3	10	-0.25 to 0.25	13	8	Hardened	0.018" per ft.	0000000	00000	000000	000000
20	-0.3 to 0.3	20	-0.3 to 0.3	18	18	Hardened	0.018" per ft.	0000000	0000	00000	00000
25	-0.5 to 0.5	25	-0.3 to 0.3	22	22	Hardened	0.018" per ft.	0000000	00000	00000	00000
30	-0.5 to 0.5	15	-0.3 to 0.3	28	13	Hardened	0.018" per ft.	0000000	0000	00000	00000
30	-0.5 to 0.5	30	-0.5 to 0.5	25	25	Hardened	0.018" per ft.	0000000	00000	00000	00000
30	-0.5 to 0.5	30	-0.5 to 0.5	26	26	Hardened	0.018" per ft.	0000000	00000	00000	00000
30	-0.5 to 0.5	30	-0.5 to 0.5	27	27	Hardened	0.018" per ft.	0000000	00000	00000	00000
40	-0.5 to 0.5	40	-0.5 to 0.5	35	35	Hardened	0.018" per ft.	0000000	00000	00000	000000
50	-0.5 to 0.5	50	-0.5 to 0.5	44	44	Hardened	0.018" per ft.	0000000	00000	00000	000000

Hoist Trolleys

Transport hook-mount hoists along a beam.

Style C are rated for metric tons.

Trolleys with screw adjustment can be adjusted to fit your beam more quickly than trolleys that use spacing washers.

Anti-drop plates prevent trolleys from falling off the beam if the wheels become derailed.

Warning: Never use to lift people or items over people.

With Mounting Eye

	Capacity		For Beam
	tons	lbs.	Shape	Wd.	Min. Ht.	Clearance	Min. Curve Radius	Wheel Material	Eye Dia.	Adjustment Type	Features		Each
Steel
C	1/2	1,100	Flat, Tapered	2"-8 5/8"	2 3/4"	3"	35"	Steel	1"	Screw	Anti-Drop Plates	0000000	0000000
C	1	2,200	Flat, Tapered	2"-8 5/8"	2 3/4"	3 1/4"	35"	Steel	1 1/8"	Screw	Anti-Drop Plates	0000000	000000
C	2	4,400	Flat, Tapered	2 1/2"-8 5/8"	3 3/4"	3 7/8"	45"	Steel	1 1/2"	Screw	Anti-Drop Plates	0000000	000000
C	3	6,600	Flat, Tapered	3"-8 5/8"	5 1/8"	4 1/2"	55"	Steel	2"	Screw	Anti-Drop Plates	0000000	000000
C	5	11,000	Flat, Tapered	3 1/2"-8 5/8"	5 5/8"	5 1/4"	70"	Steel	2 1/4"	Screw	Anti-Drop Plates	0000000	000000