McMaster-Carr

Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds.

Ultra-Low-Friction
Oil-Embedded Sleeve Bearings

For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.

Panel-Mount Oil-Embedded
Sleeve Bearings

Unlike other sleeve bearings, these do not need to be fully inserted into a housing. Their unique shape creates a permanent, secure hold in thin panels.

Vibration-Damping
Oil-Embedded Sleeve Bearings

With a flexible layer of neoprene sandwiched between an oil-embedded bronze bearing and rigid steel shell, these bearings reduce wear and machinery noise.

Food Industry Oil-Embedded
Sleeve Bearings

The oil in these bearings is suitable for incidental contact with food.

Sleeve Bearings

Multipurpose Sleeve Bearings

These leaded bronze bearings are strong, wear resistant, and excellent at handling shock loads.

Multipurpose Sleeve
Bearings with Groove

A figure-8-shaped groove provides a flow path for lubricant, distributing it evenly along the bearing’s surface.

Corrosion-Resistant Sleeve Bearings

The addition of iron and aluminum gives these aluminum-bronze bearings high strength and excellent corrosion resistance—making them suitable for use in marine and mining applications.

Corrosion-Resistant Sleeve
Bearings with Groove

Grooves on the inside of the bearing provide a flow path for lubricant, distributing it evenly along the bearing’s surface.

Dry-Running Sleeve Bearings

High-Load Dry-Running
Sleeve Bearings

A metal shell adds strength.

High-Temperature
Dry-Running Sleeve Bearings

Graphite provides a layer of dry lubrication that can operate in high-temperature environments.

Light Duty Dry-Running
Sleeve Bearings

Use where high loads and speeds are not required.

Ultra-Low-Friction
Dry-Running Sleeve Bearings

Use these bearings in applications with frequent starts and stops because they operate with very little friction.

Multipurpose Dry-Running
Sleeve Bearings

Reinforced with polyester fabric, these plastic bearings have load and speed capabilities comparable to metal bearings.

Food Industry Dry-Running
Sleeve Bearings

Made of FDA listed materials for use in food applications, these bearings also withstand caustic and washdown environments.

Chemical-Resistant
Dry-Running Sleeve Bearings

These bearings stand up to a wider range of chemicals than other dry-running sleeve bearings.

Harsh Environment
Dry-Running Sleeve Bearings

Even in the presence of harsh chemicals and extreme temperatures, these bearings operate under heavy loads and at high speeds.

Water-Resistant Dry-Running
Sleeve Bearings

Good for underwater applications, these bearings won’t swell or warp when wet.

Oil-Embedded Flanged Sleeve Bearings

Oil-Embedded Flanged
Sleeve Bearings

Also known as Oilite® bearings.

High-Load Oil-Embedded
Flanged Sleeve Bearings

Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds.

Ultra-Low-Friction Oil-Embedded
Flanged Sleeve Bearings

For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.

Food Industry Oil-Embedded
Flanged Sleeve Bearings

The oil in these bearings is suitable for incidental contact with food.

Oil-Embedded Flanged Sleeve
Bearings with Certification

These bearings come with a traceable lot number and material test report. They are also known as Oilite® bearings.

Dry-Running Flanged Sleeve Bearings

Light Duty Dry-Running
Flanged Sleeve Bearings

Use where high loads and speeds are not required.

Ultra-Low-Friction Dry-Running
Flanged Sleeve Bearings

Use these bearings in applications with frequent starts and stops because they operate with very little friction.

Easy-Install Dry-Running
Flanged Sleeve Bearings

A slit running along the length of these bearings allows you to quickly slip them into a housing—no tools required.

High-Temperature Dry-Running
Flanged Sleeve Bearings

Graphite provides a layer of dry lubrication that operates in high-temperature environments.

High-Load Dry-Running
Flanged Sleeve Bearings

An aluminum shell adds strength.

Multipurpose Dry-Running
Flanged Sleeve Bearings

Reinforced with polyester fabric, these plastic bearings have load and speed capabilities comparable to metal bearings.

Chemical-Resistant Dry-Running
Flanged Sleeve Bearings

These bearings stand up to a wider range of chemicals than other dry-running flanged sleeve bearings.

Food-Grade Dry-Running
Flanged Sleeve Bearings

Made of FDA listed materials for use in food applications, these bearings also withstand caustic and washdown environments.

Water-Resistant Dry-Running
Flanged Sleeve Bearings

Good for underwater applications, these bearings won’t swell or warp when wet.

Flanged Sleeve Bearings

Multipurpose Flanged
Sleeve Bearings

These leaded bronze bearings are strong, wear resistant, and excellent at handling shock loads.

Corrosion-Resistant
Flanged Sleeve Bearings

The addition of iron and aluminum gives these aluminum-bronze bearings high strength and excellent corrosion resistance—making them suitable for use in marine and mining applications.

Multipurpose Flanged Sleeve
Bearings with Certification

Furnished with a traceable lot number and material test report, these leaded bronze bearings are strong, wear resistant, and excellent at handling shock loads.

Thrust Bearings

Oil-Embedded Thrust Bearings

Also known as Oilite® bearings.

High-Load Oil-Embedded
Thrust Bearings

Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds.

Food Industry Oil-Embedded
Thrust Bearings

The oil in these bearings is suitable for incidental contact with food.

Ultra-Low-Friction
Oil-Embedded Thrust Bearings

For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.

Ultra-Low-Friction
Dry-Running Thrust Bearings

Use these bearings in applications with frequent starts and stops because they operate with very little friction.

High-Load Dry-Running
Thrust Bearings

A metal backing adds strength.

Water-Resistant
Dry-Running Thrust Bearings

Good for underwater applications, these bearings won’t swell or warp when wet.

High-Temperature
Dry-Running Thrust Bearings

Graphite provides a layer of dry lubrication that operates in high-temperature environments.

Food-Grade Dry-Running
Thrust Bearings

Made of FDA listed materials for use in food applications, these bearings also withstand caustic and washdown environments.

Light Duty Dry-Running
Thrust Bearings

Use where high loads and speeds are not required.

Chemical-Resistant
Dry-Running Thrust Bearings

These bearings stand up to a wider range of chemicals than other dry-running thrust bearings.

Multipurpose Thrust Bearings

These leaded bronze bearings are strong, wear resistant, and excellent at handling shock loads.

Corrosion-Resistant Thrust Bearings

The addition of iron and aluminum gives these aluminum-bronze bearings high strength and excellent corrosion resistance—making them suitable for use in marine and mining applications.

Lead Screws and Nuts

Acme Lead Screws and Nuts

Found in hand-powered clamps, vises, grates, doors, and work tables, lead screws and nuts have broad, square threads that are well suited for quick assembly, high clamping forces, and lifting and lowering heavy objects.

Metric Acme Lead Screws and Nuts

These metric lead screws and nuts have broad, square threads that are well suited for quick assembly, high clamping forces, and lifting and lowering heavy objects. They're commonly found in hand-powered clamps, vises, grates, doors, and work tables.

Precision Lead Screws and Nuts

Precision Acme Lead
Screws and Nuts

Also known as single-start and self-locking lead screws and nuts, these have a single thread that runs the length of the screw. The nut travels only when the screw turns, so your system won't unexpectedly move when the lead screw is at rest.

Fast-Travel Precision Acme
Lead Screws and Nuts

Multiple thread channels (also known as thread starts) create faster linear travel than lead screws with a single thread start.

Flanges for Precision Acme Nuts

Combine with an externally threaded acme nut to create a custom flange nut.

Metric Precision Acme
Lead Screws and Nuts

Also known as trapezoidal-thread lead screws and nuts.

Metric Fast-Travel Ultra-Precision
Lead Screws and Nuts

Multiple thread channels (also known as thread starts) create faster linear travel than lead screws with a single thread start.

Ultra-Precision Lead Screws and Nuts

Metric Ultra-Precision
Lead Screws and Nuts

Fast-Travel Ultra-Precision
Lead Screws and Nuts

Multiple thread channels (also known as thread starts) create faster linear travel than lead screws with a single thread start.

Ball Screws and Nuts

Metric Ball Screws and Nuts

Internal ball bearings provide smooth low-friction travel in applications that require high speeds, accurate positioning, and repeatable movement. Also known as single-start metric ball screws and nuts, these have a single thread that runs the length of the screw.

Self-Stopping Ball Screws and Nuts

Keep your ball screw spinning without the ball nut damaging your system. When the ball nut reaches the stop pin at either end of the ball screw, it disengages and begins to idle.

Fast-Travel Ball Screws and Nuts

Multiple thread channels (also known as thread starts) create faster linear travel than ball screws with a single thread start.

Ball Screws and Nuts

Also known as single-start ball screws and nuts, these have a single thread that runs the length of the screw. They operate with more torque than fast-travel ball screws and nuts.

Corrosion-Resistant
Ball Screws and Nuts

Also known as single-start ball screws and nuts, these have a single thread that runs the length of the screw. They operate with more torque than fast-travel ball screws and nuts.

Fast-Travel Corrosion-Resistant
Ball Screws and Nuts

Multiple thread channels (also known as thread starts) create faster linear travel than ball screws with a single thread start.

Shaft Grommets

Support shafts, bearings, and other moving parts that are routed through a hole. These grommets are slippery to allow parts to move freely in the hole. Install them on thin sheet-metal panels.

Grommets

High-Temperature Grommets

These flexible grommets withstand temperatures of 450° F or greater, which is approximately twice as high as our standard grommets. Push them into place to protect wire, cable, and cords by turning rough-edged and uneven holes into smooth, insulated holes. Commonly used in metal panels, they also damp vibration.

Grommets

Push these flexible grommets into place to protect wire, cable, and cords by turning rough-edged and uneven holes into smooth, insulated holes. Commonly used in metal panels, they also damp vibration.

Cut-to-Size Grommets

Cut the thin layer of rubber in the center of these grommets to create custom IDs to securely hold and protect wire, cable, and cords. Push these grommets into place. They turn rough-edged and uneven holes into smooth, insulated holes. Commonly used in metal panels, they also damp vibration. Also known as webbed grommets.

Grommet Assortments

Keep grommets of various sizes on hand to solve whatever problems arise.

Expandable Grommets

The center hole has flaps that flex to hold and protect various sizes of wire, cable, and cords while keeping out dust and debris. Push these grommets into place. They turn rough-edged and uneven holes into smooth, insulated holes.

Locking Grommets

These grommets snap into place and have wings that expand against the sides of the hole to lock them in position. Use them to protect wire, cable, and cords by turning rough-edged and uneven holes into smooth holes.

Expandable Locking Grommets

The center hole has flaps that flex to hold and protect various sizes of wire, cable, and cords while keeping out dust and debris. Snap these grommets into place and their wings expand against the sides of the hole to lock them in position. Use them to turn rough-edged and uneven holes into smooth holes.

Split Grommets

A slit in the side of these grommets allows you to install them around wire, cable, and cords that are already in place. They snap into the hole and their wings hold them tight. Use them to turn rough-edged and uneven holes into smooth, insulated holes.

Furniture Grommets

Brush-Style Furniture Grommets

Wire, cable, and cords pass through the grommet opening while the bristles fill in the gaps to control dust and debris. Use these grommets to eliminate cord clutter on desktops, countertops, benchtops, and other work surfaces.

Expandable Furniture Grommets

The center hole has flaps that flex to accommodate various sizes of wire, cable, and cords while still providing dust and debris protection. Use these grommets to eliminate cord clutter on desktops, countertops, benchtops, and other work surfaces.

Flexible Furniture Grommets

Squeeze these flexible grommets to open the center flap—once wire, cable, and cords pass through, the flap closes tightly for dust and debris protection as well as a finished look. Use them to eliminate cord clutter on desktops, countertops, benchtops, and other work surfaces.

Furniture Grommets

Eliminate clutter on desktops, countertops, benchtops, and other work surfaces by organizing wire, cable, and cords.

Fabric Grommets

Reinforcing Fabric Grommets

The extended neck on the washer of these grommets adds reinforcement so you can use them in thicker material such as woven fabrics. Press them into a hole you've already cut. They strengthen and prevent holes from fraying in tarps, covers, and curtains. They also provide a way to run rope and cable through your material.

Rolled-Rim Reinforcing
Fabric Grommets

A rolled rim provides added grip while the elongated neck and teeth on the washer, also known as a spur washer, add reinforcement and reduce rotation so you can use these grommets in thick materials such as canvas. Press the grommets into a hole you've already cut. They strengthen and prevent holes from fraying in tarps, covers, and curtains. They also provide a way to run rope and cable through your material.

Fabric Grommet Kits

Kits include grommets, a cutting punch, a cutting block, an installation punch, and a die set. Use them to create a way to run rope and cable through tarps, covers, and curtains.

Fabric Grommets

Press these grommets into a hole you've already cut. They strengthen and prevent holes from fraying in tarps, covers, and curtains. They also provide a way to run rope and cable through your material.

Snap-In Fabric Grommets

No setting tools needed—snap the two parts together in a hole you've already cut to strengthen the hole and eliminate fraying. Use these grommets in tarps, covers, curtains, and other material.

Self-Piercing Fabric Grommets

The sharp neck on these grommets cuts the material as you press them into place, eliminating the need for a cutting punch. They strengthen and prevent holes from fraying in tarps, covers, and curtains. They also provide a way to run rope and cable through your material.

Sealing Grommets

Trim the center of these grommets to the size you need for a tight seal around wire, cable, and cords. Use them to keep out dust, debris, and moisture.

Split Sealing Grommets

The two-piece design makes it easy to install and seal these grommets around wire, cable, and cords that are already in place. Use them to keep out dust, debris, and moisture.

Liquid-Tight Sealing Grommets

Rated IPX6 and IPX7, these grommets form liquid-tight seals around wire, cable, and cords to protect them against high-pressure washdowns as well as temporary submersion in a maximum of one meter of water. Often used in marine, antenna cable, and lighting cable applications, they can be used outdoors.

Shrink-to-Fit Sealing Grommets

Apply heat and these grommets shrink around wire, cable, and cords to keep out dust, debris, and moisture.

Create-Your-Own Split
Sealing Grommets

Cut the center of these grommets with a utility knife to create custom IDs. The two-piece design makes it easy to install and seal these grommets around wire, cable, and cords that are already in place. Use them to keep out dust, debris, and moisture.

Pipe and Tubing Grommets

Snap-In Pipe and Tubing Grommets

These grommets have two flanges that snap around holes and flex to compensate for misalignment and movement of pipe and tubing. They're often used for routing applications in panel walls.

Push-In Pipe and Tubing Grommets

Press these flexible grommets into holes and their tapered inner wall will expand when pipe or tubing is inserted to hold them snugly in place. They're often used for routing applications on metal, plastic, and fiberglass tanks.

Terms and Conditions and Privacy Policy

About Plain Bearings

Oil-Embedded Sleeve Bearings

Oil-Embedded Sleeve Bearings

High-Load Oil-EmbeddedSleeve Bearings

Ultra-Low-FrictionOil-Embedded Sleeve Bearings

Panel-Mount Oil-EmbeddedSleeve Bearings

Vibration-DampingOil-Embedded Sleeve Bearings

Food Industry Oil-EmbeddedSleeve Bearings

Sleeve Bearings

Multipurpose Sleeve Bearings

Multipurpose SleeveBearings with Groove

Corrosion-Resistant Sleeve Bearings

Corrosion-Resistant SleeveBearings with Groove

Dry-Running Sleeve Bearings

High-Load Dry-RunningSleeve Bearings

High-TemperatureDry-Running Sleeve Bearings

Light Duty Dry-RunningSleeve Bearings

Ultra-Low-FrictionDry-Running Sleeve Bearings

Multipurpose Dry-RunningSleeve Bearings

Food Industry Dry-RunningSleeve Bearings

Chemical-ResistantDry-Running Sleeve Bearings

Harsh EnvironmentDry-Running Sleeve Bearings

Water-Resistant Dry-RunningSleeve Bearings

Oil-Embedded Flanged Sleeve Bearings

Oil-Embedded FlangedSleeve Bearings

High-Load Oil-EmbeddedFlanged Sleeve Bearings

Ultra-Low-Friction Oil-EmbeddedFlanged Sleeve Bearings

Food Industry Oil-EmbeddedFlanged Sleeve Bearings

Oil-Embedded Flanged SleeveBearings with Certification

Dry-Running Flanged Sleeve Bearings

Light Duty Dry-RunningFlanged Sleeve Bearings

Ultra-Low-Friction Dry-RunningFlanged Sleeve Bearings

Easy-Install Dry-RunningFlanged Sleeve Bearings

High-Temperature Dry-RunningFlanged Sleeve Bearings

High-Load Dry-RunningFlanged Sleeve Bearings

Multipurpose Dry-RunningFlanged Sleeve Bearings

Chemical-Resistant Dry-RunningFlanged Sleeve Bearings

Food-Grade Dry-RunningFlanged Sleeve Bearings

Water-Resistant Dry-RunningFlanged Sleeve Bearings

Flanged Sleeve Bearings

Multipurpose FlangedSleeve Bearings

Corrosion-ResistantFlanged Sleeve Bearings

Multipurpose Flanged SleeveBearings with Certification

Thrust Bearings

Oil-Embedded Thrust Bearings

High-Load Oil-EmbeddedThrust Bearings

Food Industry Oil-EmbeddedThrust Bearings

Ultra-Low-FrictionOil-Embedded Thrust Bearings

Ultra-Low-FrictionDry-Running Thrust Bearings

High-Load Dry-RunningThrust Bearings

Water-ResistantDry-Running Thrust Bearings

High-TemperatureDry-Running Thrust Bearings

Food-Grade Dry-RunningThrust Bearings

Light Duty Dry-RunningThrust Bearings

Chemical-ResistantDry-Running Thrust Bearings

Multipurpose Thrust Bearings

Corrosion-Resistant Thrust Bearings

Lead Screws and Nuts

Acme Lead Screws and Nuts

Metric Acme Lead Screws and Nuts

Precision Lead Screws and Nuts

Precision Acme LeadScrews and Nuts

Fast-Travel Precision AcmeLead Screws and Nuts

Flanges for Precision Acme Nuts

Metric Precision AcmeLead Screws and Nuts

Metric Fast-Travel Ultra-PrecisionLead Screws and Nuts

Ultra-Precision Lead Screws and Nuts

Metric Ultra-PrecisionLead Screws and Nuts

Fast-Travel Ultra-PrecisionLead Screws and Nuts

Ball Screws and Nuts

Metric Ball Screws and Nuts

Self-Stopping Ball Screws and Nuts

Fast-Travel Ball Screws and Nuts

Ball Screws and Nuts

Corrosion-ResistantBall Screws and Nuts

Fast-Travel Corrosion-ResistantBall Screws and Nuts

Shaft Grommets

Shaft Grommets

Grommets

High-Temperature Grommets

High-Load Oil-Embedded
Sleeve Bearings

Ultra-Low-Friction
Oil-Embedded Sleeve Bearings

Panel-Mount Oil-Embedded
Sleeve Bearings

Vibration-Damping
Oil-Embedded Sleeve Bearings

Food Industry Oil-Embedded
Sleeve Bearings

Multipurpose Sleeve
Bearings with Groove

Corrosion-Resistant Sleeve
Bearings with Groove

High-Load Dry-Running
Sleeve Bearings

High-Temperature
Dry-Running Sleeve Bearings

Light Duty Dry-Running
Sleeve Bearings

Ultra-Low-Friction
Dry-Running Sleeve Bearings

Multipurpose Dry-Running
Sleeve Bearings

Food Industry Dry-Running
Sleeve Bearings

Chemical-Resistant
Dry-Running Sleeve Bearings

Harsh Environment
Dry-Running Sleeve Bearings

Water-Resistant Dry-Running
Sleeve Bearings

Oil-Embedded Flanged
Sleeve Bearings

High-Load Oil-Embedded
Flanged Sleeve Bearings

Ultra-Low-Friction Oil-Embedded
Flanged Sleeve Bearings

Food Industry Oil-Embedded
Flanged Sleeve Bearings

Oil-Embedded Flanged Sleeve
Bearings with Certification

Light Duty Dry-Running
Flanged Sleeve Bearings

Ultra-Low-Friction Dry-Running
Flanged Sleeve Bearings

Easy-Install Dry-Running
Flanged Sleeve Bearings

High-Temperature Dry-Running
Flanged Sleeve Bearings

High-Load Dry-Running
Flanged Sleeve Bearings

Multipurpose Dry-Running
Flanged Sleeve Bearings

Chemical-Resistant Dry-Running
Flanged Sleeve Bearings

Food-Grade Dry-Running
Flanged Sleeve Bearings

Water-Resistant Dry-Running
Flanged Sleeve Bearings

Multipurpose Flanged
Sleeve Bearings

Corrosion-Resistant
Flanged Sleeve Bearings

Multipurpose Flanged Sleeve
Bearings with Certification

High-Load Oil-Embedded
Thrust Bearings

Food Industry Oil-Embedded
Thrust Bearings

Ultra-Low-Friction
Oil-Embedded Thrust Bearings

Ultra-Low-Friction
Dry-Running Thrust Bearings

High-Load Dry-Running
Thrust Bearings

Water-Resistant
Dry-Running Thrust Bearings

High-Temperature
Dry-Running Thrust Bearings

Food-Grade Dry-Running
Thrust Bearings

Light Duty Dry-Running
Thrust Bearings

Chemical-Resistant
Dry-Running Thrust Bearings

Precision Acme Lead
Screws and Nuts

Fast-Travel Precision Acme
Lead Screws and Nuts

Metric Precision Acme
Lead Screws and Nuts

Metric Fast-Travel Ultra-Precision
Lead Screws and Nuts

Metric Ultra-Precision
Lead Screws and Nuts

Fast-Travel Ultra-Precision
Lead Screws and Nuts

Corrosion-Resistant
Ball Screws and Nuts

Fast-Travel Corrosion-Resistant
Ball Screws and Nuts

Rolled-Rim Reinforcing
Fabric Grommets

Create-Your-Own Split
Sealing Grommets