Bearing Sockets | McMaster-Carr

Filter by

System of Measurement

Thread Size

Socket Shape

Drive Size

Square Drive Size

Bolt Clearance Type

For Nut Thread Size

Overall Length

Drive Style

For Nut Size

Screw Size

Length

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Drive Type

Bolt Clearance Depth

REACH

Export Control Classification Number (ECCN)

EAR99

RoHS

Compliant

Not Compliant

DFARS Specialty Metals

Exempt

Sold As

Individual

Set

For Bearing Nut Specifications Met

ANSI/ABMA 8.2

DIN Standard

ISO Standard

Number of Pieces

Finish

Black Oxide

Chrome Plated

Phosphate Coated

Zinc Phosphate Coated

Nut Clearance Depth

77 Products

Spanner Sockets


Socket Shown With Wrench (Sold Separately)

4-Pin

For easy tightening and loosening, these sockets have pins that grip the slotted sides on bearing nuts. These sockets require less clearance around bearings than standard hook spanner wrenches, so they’re good in tight spaces. Use them with a square-drive wrench handle or a ratchet wrench; they’re not for use with impact wrenches.

								Clearance Dp.
	Drive Size	Overall Lg.	OD	For Nut Size	For Nut Thread Size	For Bearing Nut Specs. Met	For Nut Dia.	Nut , mm	Bolt	Material		Each
4-Pin Socket







				3/8" Square Drive

				3/4"	3"	1 1/8"	—	0.391"-32	ANSI/ABMA 8.2	3/4"	—	2 1/8"	Steel	5510N115	0000000


				7/8"	3"	1 1/4"	—	0.469"-32	ANSI/ABMA 8.2	7/8"	—	2 1/8"	Steel	5510N116	000000
				1"	3"	1 3/8"	—	0.586"-32	ANSI/ABMA 8.2	1"	—	2 1/8"	Steel	5510N117	000000
				1 1/8"	3"	1 1/2"	—	0.664"-32	ANSI/ABMA 8.2	1 1/8"	—	2 1/16"	Steel	5510N118	000000
				1 3/8"	3"	1 13/16"	—	0.781"-32	ANSI/ABMA 8.2	1 3/8"	—	2 1/16"	Steel	5510N119	000000
				1 9/16"	3"	2"	—	0.969"-32	ANSI/ABMA 8.2	1 9/16"	—	2 1/16"	Steel	5510N121	000000
				18 mm	56.2 mm	22 mm	—	M10	DIN 981, ISO 2982	18 mm	6	43 mm	Steel	5510N175	000000
				18 mm	76 mm	28.5 mm	—	M10	ISO 2982-2	18 mm	—	54 mm	Steel	5510N144	000000
				22 mm	56.2 mm	28 mm	—	M12	DIN 981, ISO 2982	22 mm	6	43 mm	Steel	5510N176	000000
				22 mm	76 mm	32 mm	—	M12	ISO 2982-2	22 mm	—	54 mm	Steel	5510N145	000000
				25 mm	76 mm	35 mm	—	M15	ISO 2982-2	25 mm	—	54 mm	Steel	5510N146	000000


				28 mm	76 mm	38 mm	—	M17	ISO 2982-2	28 mm	—	54 mm	Steel	5510N147	000000
				32 mm	76 mm	42 mm	—	M20	ISO 2982-2	32 mm	—	52 mm	Steel	5510N148	000000
				38 mm	76 mm	49.5 mm	—	M25	ISO 2982-2	38 mm	—	52 mm	Steel	5510N151	000000




						1/2" Square Drive

						1 3/4"	3 1/2"	2 3/8"	—	1.173"-18	ANSI/ABMA 8.2	1 3/4"	—	2 1/4"	Steel	5510N122	000000


						2 1/16"	3 1/2"	2 11/16"	—	1.312"-18	ANSI/ABMA 8.2	2 1/16"	—	2 1/4"	Steel	5510N123	000000
						2 1/16"	3 1/2"	2 11/16"	—	1.376"-18	ANSI/ABMA 8.2	2 1/16"	—	2 1/4"	Steel	5510N124	000000
						2 1/4"	3 1/2"	2 7/8"	—	1.563"-18	ANSI/ABMA 8.2	2 1/4"	—	2 1/4"	Steel	5510N125	000000
						2 17/32"	3 1/2"	3 3/16"	—	1.767"-18	ANSI/ABMA 8.2	2 17/32"	—	2 1/4"	Steel	5510N126	000000
						2 11/16"	4"	3 3/8"	—	1.967"-18	ANSI/ABMA 8.2	2 11/16"	—	2 5/8"	Steel	5510N127	000000
						2 31/32"	4"	3 5/8"	—	2.157"-18	ANSI/ABMA 8.2	2 31/32"	—	2 5/8"	Steel	5510N128	000000
						3 5/32"	4"	3 13/16"	—	2.360"-18	ANSI/ABMA 8.2	3 5/32"	—	2 5/8"	Steel	5510N129	000000
						3 3/8"	4"	4"	—	2.548"-18	ANSI/ABMA 8.2	3 3/8"	—	2 5/8"	Steel	5510N131	000000
						3 5/8"	4"	4 1/4"	—	2.751"-18	ANSI/ABMA 8.2	3 5/8"	—	2 5/8"	Steel	5510N132	000000
						25 mm	82 mm	33 mm	M10 M15	—	DIN 1804 DIN 981, ISO 2982	25 mm	7	59 mm	Steel	5510N177	000000


						28 mm	82 mm	36 mm	M12 M17	—	DIN 1804 DIN 981, ISO 2982	28 mm	7	59 mm	Steel	5510N178	000000
						32 mm	82 mm	38 mm	M16 M20	—	DIN 1804 DIN 981, ISO 2982	32 mm	8.4	56 mm	Steel	5510N179	000000
						38 mm	82 mm	46 mm	—	M25	DIN 981, ISO 2982	38 mm	10.4	56 mm	Steel	5510N181	000000
						45 mm	82 mm	53 mm	M26 M30	—	DIN 1804 DIN 981, ISO 2982	45 mm	11	56 mm	Steel	5510N182	000000
						45 mm	90 mm	57 mm	—	M30	ISO 2982-2	45 mm	—	57 mm	Steel	5510N153	000000
						48 mm	90 mm	60 mm	—	M32	ISO 2982-2	48 mm	—	57 mm	Steel	5510N154	000000
						52 mm	82 mm	60 mm	—	M35	DIN 981, ISO 2982	52 mm	11	56 mm	Steel	5510N183	000000
						52 mm	90 mm	64 mm	—	M35	ISO 2982-2	52 mm	—	57 mm	Steel	5510N155	000000
						58 mm	82 mm	68 mm	M38 M40	—	DIN 1804 DIN 981, ISO 2982	58 mm	11	56 mm	Steel	5510N184	000000
						58 mm	90 mm	74 mm	—	M40	ISO 2982-2	58 mm	—	57 mm	Steel	5510N156	000000


						65 mm	90 mm	81 mm	—	M45	ISO 2982-2	65 mm	—	57 mm	Steel	5510N157	000000
						70 mm	90 mm	86 mm	—	M50	ISO 2982-2	70 mm	—	65 mm	Steel	5510N158	000000
						75 mm	102 mm	91 mm	—	M55	ISO 2982-2	75 mm	—	65 mm	Steel	5510N159	000000
						80 mm	102 mm	96 mm	—	M60	ISO 2982-2	80 mm	—	65 mm	Steel	5510N161	000000




						3/4" Square Drive

		3 7/8"	5"			4 1/2"	—	2.933"-12	ANSI/ABMA 8.2	3 7/8"	—	3 1/8"	Steel	5510N133	000000


		4 15/16"	5"			5 9/16"	—	3.730"-12	ANSI/ABMA 8.2	4 15/16"	—	3 1/8"	Steel	5510N137	00000000
		5 3/16"	5"			5 13/16"	—	3.918"-12	ANSI/ABMA 8.2	5 3/16"	—	3 1/8"	Steel	5510N138	00000000
		5 7/16"	6"			6 1/8"	—	4.122"-12	ANSI/ABMA 8.2	5 7/16"	—	3 1/8"	Steel	5510N139	00000000
		70 mm	90 mm			78.5 mm	—	M50	DIN 981, ISO 2982	70 mm	13.8	62 mm	Steel	5510N186	000000
		80 mm	90 mm			88.5 mm	—	M60	DIN 981, ISO 2982	80 mm	15	62 mm	Steel	5510N188	000000
		85 mm	90 mm			94 mm	—	M65	DIN 981, ISO 2982	85 mm	15	62 mm	Steel	5510N189	00000000
		105 mm	127 mm			121 mm	—	M80	ISO 2982-2	105 mm	—	81 mm	Steel	5510N165	00000000
		110 mm	127 mm			126 mm	—	M85	ISO 2982-2	110 mm	—	81 mm	Steel	5510N166	00000000
		130 mm	127 mm			149.5 mm	—	M100	ISO 2982-2	130 mm	—	81 mm	Steel	5510N169	00000000




						1" Square Drive

						92 mm	110 mm	103 mm	—	M70	DIN 981, ISO 2982	92 mm	15	75 mm	Steel	5510N191	00000000


						105 mm	110 mm	116 mm	—	M80	DIN 981, ISO 2982	105 mm	17	75 mm	Steel	5510N193	00000000
						110 mm	110 mm	121 mm	—	M85	DIN 981, ISO 2982	110 mm	19	75 mm	Steel	5510N194	00000000

Wheel Bearing Locknut Socket Sets

Shaped and sized for compatibility with wheel bearing locknuts on trucks and trailers, the sockets in these sets make it easy to install and remove locknuts. They ensure the proper torque setting when you reinstall a locknut on your wheel, so you know it's safe and secure. These are square drive sockets for use with hand-driven tools, not impact wrenches. Made of steel, they grip locknuts tightly and prevent rounding.

Sockets—Chrome-Plated Steel

Plastic Case

4-Pin

6-Pin

6-Point

Rounded

Spindle Puller Adapter—Spindle puller adapters remove the front spindle on four-wheel drive trucks so you can access the needle bearing when lubricating and aligning the front wheels.

6-Point Rounded: 2 3/8", 2 1/2", 2 9/16", 2 3/4"—6-point rounded sockets fit the special rounded hex nuts found on some trucks.

Plastic Case—Carry sets with a plastic case from one location to the next.

4-Pin Socket and 6-Pin Socket—4-pin and 6-pin sockets fit around retaining locknuts with slots or holes in the side. Also known as spanner sockets, they’re similar to tri-groove sockets but have four or six pins instead of three.

6-Point Socket—6-point sockets are designed for use with hex locknuts.

	Components Included	Includes	Container Type	Socket Shape	Drive Size		Each
1/2" Square Drive



	6	1 Adapter 5 Sockets	4-Pin: 2", 2 1/4", 2 3/4" 6-Pin: 2 1/4" Spindle Puller Adapter	Plastic Case	4-Pin, 6-Pin	2", 2 1/4", 2 5/16", 2 3/4"	99939A120	0000000


	7	7 Sockets	6-Point: 2 3/8", 2 1/2", 55 mm 6-Point Rounded: 2 3/8", 2 1/2", 2 9/16", 2 3/4",	Plastic Case	6-Point	2 3/8", 2 1/2", 2 9/16", 2 3/4", 55 mm	99939A140	000000

Budd Wheel Impact Sockets

Remove and install dual wheels on trucks and trailers—these sockets have a hex recess for accessing lug nuts and a square recess to turn the threaded shafts found on inner wheels. They are made to withstand the high torque and force of impact tools.

Sockets require a locking retainer. Use with an impact wrench that has a pin-style socket retainer, or use a socket retaining ring with tools that have a hole- or hole-and-ring style socket retainer.

Black-Oxide Steel

	Sockets									Retaining Rings
							Deep Clearance
	Drive Size	Square Recess Size	Compatible Retaining Ring ID	OD	Socket Shape	For Drive Style	Overall Lg.		Each		Each
3/4" Square Drive



		1 1/2"	13/16"	1 5/8"	2 1/4"	6-Point	External Hex	4"	5552A33	000000	5552A38	00000

Zinc-Phosphate-Coated Steel

	Sockets									Retaining Rings
							Deep Clearance
	Drive Size	Square Recess Size	Compatible Retaining Ring ID	OD	Socket Shape	For Drive Style	Overall Lg.		Each		Each
1" Square Drive



		1 1/2"	13/16"	2"	2 1/4"	6-Point	External Hex	3 15/16"	90478A140	000000	5550A611	00000


		38 mm	20 mm	2"	2 13/64"	6-Point	External Hex	3 13/16"	90478A120	00000	5550A611	0000
		41 mm	21 mm	2"	2 45/64"	6-Point	External Hex	3 15/16"	90478A130	00000	5550A611	0000

6-Point Lug Nut-Holding Impact Sockets

Move from lug nut to lug nut with the speed of a racecar pit crew. Up to five standard 6-point lug nuts stack up in the shank of these sockets, so you don’t have to stop to take the lug nuts out of the socket. With thicker walls and more give than standard sockets, these sockets can withstand the high torque and force of impact tools.

Zinc-Plated Steel

		Clearance Dp.					Extra-Deep Clearance
	Drive Size	Nut	Bolt	OD	Socket Shape	For Drive Style	Overall Lg.		Each
1/2" Square Drive



		3/4"	4 29/64"	4 3/4"	1 1/8"	6-Point	External Hex	5 1/4"	93277A110	000000

8-Point Sockets

Quickly position these sockets on square and external 8-point fasteners.

Steel

3/4" Square Drive

8-Point

Socket

For

External

Octagonal

Drives

3/4" Square Drive—_3/4" square drive size sockets work with wheel bearing locknuts on trucks and trailers.

					Standard Clearance
	Drive Size	OD	Socket Shape	For Drive Style	Overall Lg.		Each
3/4" Square Drive



		2 3/8"	2 45/64"	8-Point	External Octagon	3 1/2"	99940A110	000000


		2 9/16"	2 59/64"	8-Point	External Octagon	3 1/2"	99940A120	00000
		2 3/4"	3 13/64"	8-Point	External Octagon	3 1/2"	99940A130	00000
		2 7/8"	3 9/32"	8-Point	External Octagon	3 1/2"	99940A140	00000
		3"	3 31/64"	8-Point	External Octagon	3 1/2"	99940A150	00000
		3 1/8"	3 39/64"	8-Point	External Octagon	3 1/2"	99940A160	00000
		3 1/4"	3 45/64"	8-Point	External Octagon	3 1/2"	99940A170	00000
		3 1/2"	3 63/64"	8-Point	External Octagon	3 1/2"	99940A190	00000
		3 3/4"	4 17/64"	8-Point	External Octagon	3 1/2"	99940A210	00000
		3 7/8"	4 27/64"	8-Point	External Octagon	3 1/2"	99940A230	00000
		4 3/8"	4 63/64"	8-Point	External Octagon	3 1/2"	99940A240	00000


		4 1/2"	5 1/8"	8-Point	External Octagon	3 1/2"	99940A250	00000
		4 7/8"	5 35/64"	8-Point	External Octagon	3 1/2"	99940A270	00000
		94 mm	4 7/32"	8-Point	External Octagon	3 1/2"	99940A310	00000
		100 mm	4 31/64"	8-Point	External Octagon	3 1/2"	99940A320	00000

Budd Wheel Impact Socket Sets

4-Point

Socket

6-Point

Socket

Retaining Rings

Remove and install dual wheels on trucks and trailers with the sockets in these sets. The sockets are extra deep for use with Budd wheels, so you can remove both the nut and the stud with a single socket. Sets include sockets for hex drives to access lug nuts and sockets for square drives to turn the threaded shafts on inner wheels. All are impact sockets, made to withstand the high torque and force of impact tools. Use them with an impact wrench that has a pin-style socket retainer, or use a socket retaining ring with tools that have a hole- or hole-and-ring-style socket retainer.

	Sockets								Retaining Rings
	No. of Pieces	Includes	Color	Overall Lg.	Container Type	Socket Shape		Each		Each
1" Square Drive—Phosphate-Coated Steel



		5	Square Sockets: 17 mm, 20 mm, 21 mm, 13/16" Hex Sockets: 35 mm, 38 mm, 41 mm, 33 mm, 1 1/2"	Black	5 5/8"	Plastic Case	4-Point, 6-Point	90479A110	0000000	5550A611	00000