6206 Ball Bearings | McMaster-Carr

					Radial Load Cap., lbs.
Bearing Trade Number	For Shaft Dia.	For Housing ID	Wd.	Ring Material	Dynamic	Static	Max. Speed, rpm	Lubrication	Temp. Range, °F	ABEC Rating	Specifications Met		Each
6206	30mm	62mm	16mm	Steel	4,300	2,500	14,000	Lubricated	-20° to 230°	ABEC-1	DIN 625-1	00000000	000000

Permanently Lubricated Ball Bearings

A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication. Because it's solid, the lubricant blocks out water and dust, extending the life of the bearing.

For technical drawings and 3-D models, click on a part number.

					Radial Load Cap., lbs.
Bearing Trade Number	For Shaft Dia.	For Housing ID	Wd.	Ring Material	Dynamic	Static	Max. Speed, rpm	Lubrication	Temp. Range, °F	ABEC Rating		Each
Open
6206	30mm	62mm	16mm	Steel	3,700	2,300	6,500	Lubricated	10° to 200°	ABEC-1	00000000	000000

Stainless Steel Ball Bearings

Open bearings dissipate heat more efficiently than shielded and sealed bearings.

For technical drawings and 3-D models, click on a part number.

Open

					Radial Load Cap., lbs.
Bearing Trade Number	For Shaft Dia.	For Housing ID	Wd.	Ring Material	Dynamic	Static	Max. Speed, rpm	Lubrication	Temp. Range, °F	ABEC Rating		Each
6206	30mm	62mm	16mm	440C Stainless Steel	2,950	2,300	11,000	Lubricated	-40° to 240°	ABEC-1	00000000	000000

Permanently Lubricated Stainless Steel Ball Bearings

A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication. The solid lubricant blocks out water and dust, extending the life of the bearing.

For technical drawings and 3-D models, click on a part number.

Metric Bearings

					Radial Load Cap., lbs.
Bearing Trade Number	For Shaft Dia., mm	For Housing ID, mm	Wd., mm	Ring Material	Dynamic	Static	Max. Speed, rpm	Lubrication	Temp. Range, °F	ABEC Rating		Each
Open
6206	30	62	16	440C Stainless Steel	3,350	2,300	6,000	Lubricated	-10° to 200°	ABEC-1	00000000	000000

End Supports for Lead Screws and Ball Screws

A set of ball bearings reduces friction and secures the end of a ball or lead screw. Note: The end of your ball or lead screw must be machined before installing it into an end support.

For technical drawings and 3-D models, click on a part number.

For Radial Loads

End supports for radial loads handle loads perpendicular to the lead screw.

						Face Mounting Holes			Top Mounting Holes
ID	Ht.	Center Ht.	Wd.	Dp.	No. of Mounting Holes	Dia.	Ctr.-to-Ctr. Wd.	Ctr.-to-Ctr. Ht.	Dia.	Ctr.-to-Ctr. Wd.	Temperature Range, °F		Each
Alloy Steel
1 3/16"	3 5/8"	1 7/8"	6 1/2"	1 21/32"	6	21/32"	4 3/4"	2"	29/32"	4 3/4"	-40° to 210°	000000000	0000000